Package: hplip-gui; Maintainer for hplip-gui is Debian Printing Team <[email protected]>; Source for hplip-gui is src:hplip (PTS, buildd, popcon).
Reported by: Helge Kreutzmann <[email protected]>
Date: Fri, 17 Dec 2021 09:57:01 UTC
Severity: minor
Found in version hplip/3.21.2+dfsg1-2
Reply or subscribe to this bug.
View this report as an mbox folder, status mbox, maintainer mbox
Report forwarded
to [email protected], Debian Printing Team <[email protected]>:
Bug#1001829; Package hplip-gui.
(Fri, 17 Dec 2021 09:57:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Helge Kreutzmann <[email protected]>:
New Bug report received and forwarded. Copy sent to Debian Printing Team <[email protected]>.
(Fri, 17 Dec 2021 09:57:03 GMT) (full text, mbox, link).
Message #5 received at [email protected] (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
Package: hplip-gui
Version: 3.21.2+dfsg1-2
Severity: minor
Hello maintainers,
I'm reporting this here as this looks like a package configuration
issue, combined with possible problems in HP support for Debian
stable[1] and finally the Ubuntu site wants me to create an account,
acknowledge long legal text which I would like to avoid for this small
issue.
A few days ago I installed an HP scanner and the necessary software
(including hplip-gui) to use it. It works (after needing to allow a
firmware download), but since then I get the following syslog entry:
hp-systray: hp-systray[3176]: error: option -s not recognized
If this warning is harmless, then please supply a logcheck rule which
filters it out.
Please note that I'm using a completely different printer, so the
messages below reggarding the printer are expected and CUPS works for
it.
Thanks!
[1] See the messages below, e.g. debian-11 version is not supported.
Using debian-10.7 versions dependencies to verify and install...
-- Package-specific info:
Saving output in log file: /home/helge/hp-check.log
HP Linux Imaging and Printing System (ver. 3.21.2)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-11 version is not supported. Using debian-10.7 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Host: samd
Distribution: debian 11
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.21.2
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro 11 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.2
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.21.2
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hpaio:/usb/HP_ScanJet_Pro_4500_fn1?serial=CN0C3D904B
[installation]
date_time = 12/17/21 10:44:17
version = 3.21.2
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.53.3 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.31 OK -
dbus DBus - Message bus system REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.21 OK -
error: avahi-utils avahi-utils OPTIONAL - - MISSING 'avahi-utils needs to be installed'
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libavahi-dev libavahi-dev REQUIRED - - MISSING 'libavahi-dev needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.9.2 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.10 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.9.2 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.1.2 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.59 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 10.2.1 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.21.2 OK -
hpmudext IO-Extension REQUIRED - 3.21.2 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.21.2 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.21.2 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
FS-1020D
--------
Type: Unknown
Device URI: usb://Kyocera/FS-1020D?serial=XAX5560374
PPD: /etc/cups/ppd/FS-1020D.ppd
PPD Description: Kyocera FS-1020D Foomatic/Postscript
Printer status: printer FS-1020D disabled since Wed Sep 11 12:59:07 2019 -
Kann Daten nicht zum Drucker senden.
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Kyocera-FS-1020D-Postscript-Kyocera
-----------------------------------
Type: Unknown
Device URI: usb://Kyocera/FS-1020D?serial=XAX5560374
PPD: /etc/cups/ppd/Kyocera-FS-1020D-Postscript-Kyocera.ppd
PPD Description: Kyocera Mita FS-1020D
Printer status: printer Kyocera-FS-1020D-Postscript-Kyocera is idle. enabled since Sun Jun 13 21:30:46 2021
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Kyocera_FS-1020D
----------------
Type: Unknown
Device URI: usb://Kyocera/FS-1020D?serial=XAX5560374
PPD: /etc/cups/ppd/Kyocera_FS-1020D.ppd
PPD Description: Kyocera FS-1020D Foomatic/Postscript
Printer status: printer Kyocera_FS-1020D is idle. enabled since Sat Mar 2 12:19:37 2019
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Kyocera_FS-1020D-file
---------------------
Type: Unknown
Device URI: /tmp/printout-Kyocera_FS-1020D
PPD: /etc/cups/ppd/Kyocera_FS-1020D-file.ppd
PPD Description: Kyocera Mita FS-1020D
Printer status: printer Kyocera_FS-1020D-file is idle. enabled since Sun Mar 11 19:04:37 2012
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libavahi-client-dev' package is missing/incompatible
error: 'libavahi-core-dev' package is missing/incompatible
error: 'libavahi-common-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'xsane' package is missing/incompatible
error: 'avahi-utils' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 12
Total Warnings: 4
Done.
-- System Information:
Debian Release: 11.1
APT prefers stable-security
APT policy: (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel taint flags: TAINT_UNSIGNED_MODULE
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages hplip-gui depends on:
ii dbus-user-session [default-dbus-session-bus] 1.12.20-2
ii dbus-x11 [dbus-session-bus] 1.12.20-2
ii hplip 3.21.2+dfsg1-2
ii python3-dbus.mainloop.pyqt5 5.15.2+dfsg-3
ii python3-pyqt5 5.15.2+dfsg-3
Versions of packages hplip-gui recommends:
pn python3-notify2 <none>
ii simple-scan 3.38.1-1
hplip-gui suggests no packages.
-- debconf-show failed
--
Dr. Helge Kreutzmann [email protected]
Dipl.-Phys. http://www.helgefjell.de/debian.php
64bit GNU powered gpg signed mail preferred
Help keep free software "libre": http://www.ffii.de/
[signature.asc (application/pgp-signature, inline)]
Send a report that this bug log contains spam.
Debbugs is free software and licensed under the terms of the GNU General Public License version 2. The current version can be obtained from https://bugs.debian.org/debbugs-source/.
Copyright © 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson, 2005-2017 Don Armstrong, and many other contributors.