Subject: hp-systray: hp-systray: error: option -s not recognized

From: Helge Kreutzmann <[email-masked]>
Date: Fri, 17 Dec 2021 10:52:31 +0100

Package: hplip-gui
Version: 3.21.2+dfsg1-2
Severity: minor

Hello maintainers,
I'm reporting this here as this looks like a package configuration
issue, combined with possible problems in HP support for Debian
stable[1] and finally the Ubuntu site wants me to create an account,
acknowledge long legal text which I would like to avoid for this small
issue.

A few days ago I installed an HP scanner and the necessary software
(including hplip-gui) to use it. It works (after needing to allow a
firmware download), but since then I get the following syslog entry:

hp-systray: hp-systray[3176]: error: option -s not recognized

If this warning is harmless, then please supply a logcheck rule which
filters it out.

Please note that I'm using a completely different printer, so the
messages below reggarding the printer are expected and CUPS works for
it.

Thanks!

[1] See the messages below, e.g. debian-11 version is not supported.
Using debian-10.7 versions dependencies to verify and install...

-- Package-specific info:
Saving output in log file: /home/helge/hp-check.log

HP Linux Imaging and Printing System (ver. 3.21.2)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.                                  
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.                           
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).                                                                                      

Check types:                                                                                                                                                                                                                                    
a. EXTERNALDEP - External Dependencies                                                                                                                                                                                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)                                                                                                                                                                    
c. COMPILEDEP - Compile time Dependencies                                                                                                                                                                                                       
d. [All are run-time checks]                                                                                                                                                                                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                                                                                                                                                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

warning: debian-11 version is not supported. Using debian-10.7 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

 Host: samd
 Distribution: debian 11
 Bitness: 64 bit

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.21.2
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro  11 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.21.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.2
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.21.2

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hpaio:/usb/HP_ScanJet_Pro_4500_fn1?serial=CN0C3D904B

[installation]
date_time = 12/17/21 10:44:17
version = 3.21.2

 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 error: cups          CUPS - Common Unix Printing System                           REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.53.3          OK         -
 error: xsane         xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             -               MISSING    'xsane needs to be installed'
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.31          OK         -
 dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.20         OK         -
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
 network              network -wget                                                OPTIONAL        -               1.21            OK         -
 error: avahi-utils   avahi-utils                                                  OPTIONAL        -               -               MISSING    'avahi-utils needs to be installed'

------------------------
| General Dependencies |
------------------------

 libjpeg              libjpeg - JPEG library                                       REQUIRED        -               -               OK         -
 error: cups-devel    CUPS devel- Common Unix Printing System development files    REQUIRED        -               -               MISSING    'cups-devel needs to be installed'
 error: cups-image    CUPS image - CUPS image development files                    REQUIRED        -               -               MISSING    'cups-image needs to be installed'
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.31'         OK         -
 error: libusb        libusb - USB library                                         REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 error: sane-devel    SANE - Scanning library development files                    REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 error: libavahi-dev  libavahi-dev                                                 REQUIRED        -               -               MISSING    'libavahi-dev needs to be installed'
 error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           -               MISSING    'libnetsnmp-devel needs to be installed'
 libcrypto            libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           OK         -
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.9.2           OK         -
 error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               MISSING    'python3-notify2 needs to be installed'
 error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4                         OPTIONAL        4.0             -               MISSING    'python3-pyqt4-dbus needs to be installed'
 error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             -               MISSING    'python3-pyqt4 needs to be installed'
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.16          OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.10          OK         -
 python3-devel        Python devel - Python development files                      REQUIRED        2.2             3.9.2           OK         -
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               8.1.2           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.5.59          OK         -

--------------
| COMPILEDEP |
--------------

 libtool              libtool - Library building support services                  REQUIRED        -               2.4.6           OK         -
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               10.2.1          OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.3             OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.21.2          OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.21.2          OK         -

----------------------
| Scan Configuration |
----------------------

'/etc/sane.d/dll.d/hpaio' not found.
 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.21.2          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.21.2          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

FS-1020D
--------
Type: Unknown
Device URI: usb://Kyocera/FS-1020D?serial=XAX5560374
PPD: /etc/cups/ppd/FS-1020D.ppd
PPD Description: Kyocera FS-1020D Foomatic/Postscript
Printer status: printer FS-1020D disabled since Wed Sep 11 12:59:07 2019 -
	Kann Daten nicht zum Drucker senden.
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Kyocera-FS-1020D-Postscript-Kyocera
-----------------------------------
Type: Unknown
Device URI: usb://Kyocera/FS-1020D?serial=XAX5560374
PPD: /etc/cups/ppd/Kyocera-FS-1020D-Postscript-Kyocera.ppd
PPD Description: Kyocera Mita FS-1020D
Printer status: printer Kyocera-FS-1020D-Postscript-Kyocera is idle.  enabled since Sun Jun 13 21:30:46 2021
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Kyocera_FS-1020D
----------------
Type: Unknown
Device URI: usb://Kyocera/FS-1020D?serial=XAX5560374
PPD: /etc/cups/ppd/Kyocera_FS-1020D.ppd
PPD Description: Kyocera FS-1020D Foomatic/Postscript
Printer status: printer Kyocera_FS-1020D is idle.  enabled since Sat Mar  2 12:19:37 2019
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Kyocera_FS-1020D-file
---------------------
Type: Unknown
Device URI: /tmp/printout-Kyocera_FS-1020D
PPD: /etc/cups/ppd/Kyocera_FS-1020D-file.ppd
PPD Description: Kyocera Mita FS-1020D
Printer status: printer Kyocera_FS-1020D-file is idle.  enabled since Sun Mar 11 19:04:37 2012
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

--------------
| PERMISSION |
--------------

-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible 
error: 'libcups2-dev' package is missing/incompatible 
error: 'cups-bsd' package is missing/incompatible 
error: 'cups-client' package is missing/incompatible 
error: 'libcupsimage2' package is missing/incompatible 
error: 'libcupsimage2-dev' package is missing/incompatible 
error: 'libusb-1.0.0-dev' package is missing/incompatible 
error: 'libsane-dev' package is missing/incompatible 
error: 'libavahi-client-dev' package is missing/incompatible 
error: 'libavahi-core-dev' package is missing/incompatible 
error: 'libavahi-common-dev' package is missing/incompatible 
error: 'libsnmp-dev' package is missing/incompatible 
error: 'snmp' package is missing/incompatible 
error: 'python3-pyqt4' package is missing/incompatible 
error: 'gtk2-engines-pixbuf' package is missing/incompatible 

Missing Optional Dependencies
-----------------------------
error: 'xsane' package is missing/incompatible 
error: 'avahi-utils' package is missing/incompatible 
error: 'python3-notify2' package is missing/incompatible 
error: 'python3-dbus.mainloop.qt' package is missing/incompatible 

Total Errors: 12
Total Warnings: 4

Done.

-- System Information:
Debian Release: 11.1
  APT prefers stable-security
  APT policy: (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel taint flags: TAINT_UNSIGNED_MODULE
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages hplip-gui depends on:
ii  dbus-user-session [default-dbus-session-bus]  1.12.20-2
ii  dbus-x11 [dbus-session-bus]                   1.12.20-2
ii  hplip                                         3.21.2+dfsg1-2
ii  python3-dbus.mainloop.pyqt5                   5.15.2+dfsg-3
ii  python3-pyqt5                                 5.15.2+dfsg-3

Versions of packages hplip-gui recommends:
pn  python3-notify2  <none>
ii  simple-scan      3.38.1-1

hplip-gui suggests no packages.

-- debconf-show failed

-- 
      Dr. Helge Kreutzmann                     [email-masked]
           Dipl.-Phys.                   http://www.helgefjell.de/debian.php
        64bit GNU powered                     gpg signed mail preferred
           Help keep free software "libre": http://www.ffii.de/