Using Oracle Solaris Live Upgrade to Migrate or Upgrade a System With Zones (at Least Solaris 10 5/09)

You can use the Oracle Solaris Live Upgrade feature to migrate or upgrade a system with zones starting in the Solaris 10 10/08 release. Additional sparse—root and whole—root zone configurations are supported by Live Upgrade starting in the Solaris 10 5/09 release.

This section describes how to configure a system with zones so that it can be upgraded and patched with Oracle Solaris Live Upgrade starting in the Solaris 10 5/09 release. If you are migrating to a ZFS root file system without zones, see Using Oracle Solaris Live Upgrade to Migrate to a ZFS Root File System (Without Zones).

Consider the following points when using Oracle Solaris Live Upgrade with ZFS and zones starting in at least the Solaris 10 5/09 release:

• To use Oracle Solaris Live Upgrade with zone configurations that are supported starting in at least the Solaris 10 5/09 release, you must first upgrade your system to at least the Solaris 10 5/09 release by using the standard upgrade program.

• Then, with Oracle Solaris Live Upgrade, you can either migrate your UFS root file system with zone roots to a ZFS root file system or you can upgrade or patch your ZFS root file system and zone roots.

• You cannot directly migrate unsupported zone configurations from a previous Solaris 10 release to at least the Solaris 10 5/09 release.

If you are migrating or configuring a system with zones starting in the Solaris 10 5/09 release, review the following information:

• Supported ZFS with Zone Root Configuration Information (at Least Solaris 10 5/09)

• How to Create a ZFS BE With a ZFS Root File System and a Zone Root (at Least Solaris 10 5/09)

• How to Upgrade or Patch a ZFS Root File System With Zone Roots (at Least Solaris 10 5/09)

• How to Migrate a UFS Root File System With a Zone Root to a ZFS Root File System (at Least Solaris 10 5/09)

Supported ZFS with Zone Root Configuration Information (at Least Solaris 10 5/09)

Review the supported zone configurations before using Oracle Solaris Live Upgrade to migrate or upgrade a system with zones.

• Migrate a UFS root file system to a ZFS root file system – The following configurations of zone roots are supported:

  • In a directory in the UFS root file system

  • In a subdirectory of a mount point in the UFS root file system

  • UFS root file system with a zone root in a UFS root file system directory or in a subdirectory of a UFS root file system mount point and a ZFS non-root pool with a zone root

  The following UFS/zone configuration is not supported: UFS root file system that has a zone root as a mount point.

• Migrate or upgrade a ZFS root file system – The following configurations of zone roots are supported:

  • In a dataset in the ZFS root pool. In some cases, if a dataset for the zone root is not provided before the Oracle Solaris Live Upgrade operation, a dataset for the zone root (zoneds) will be created by Oracle Solaris Live Upgrade.

  • In a subdirectory of the ZFS root file system

  • In a dataset outside of the ZFS root file system

  • In a subdirectory of a dataset outside of the ZFS root file system

  • In a dataset in a non root pool. In the following example, zonepool/zones is a dataset that contains the zone roots, and rpool contains the ZFS BE:

    zonepool zonepool/zones zonepool/zones/myzone rpool rpool/ROOT rpool/ROOT/myBE

    Oracle Solaris Live Upgrade snapshots and clones the zones in zonepool and the rpool BE if you use this syntax:

    # lucreate -n newBE

    The newBE BE in rpool/ROOT/newBE is created. When activated, newBE provides access to the zonepool components.

    In the proceeding example, if /zonepool/zones was a subdirectory and not a separate dataset, then Live Upgrade would migrate it as components of the root pool, rpool.

• Zones Migration or upgrade information with zones for both UFS and ZFS – Review the following considerations that might affect a migration or an upgrade of either a UFS and ZFS environment:

  • If you configured your zones as described in Using Oracle Solaris Live Upgrade to Migrate or Upgrade a System With Zones (Solaris 10 10/08) in the Solaris 10 10/08 release and have upgraded to at least the Solaris 10 5/09, you should be able to migrate to a ZFS root file system or use Solaris Live Upgrade to upgrade to at least the Solaris 10 5/09 release.

  • Do not create zone roots in nested directories, for example, zones/zone1 and zones/zone1/zone2. Otherwise, mounting might fail at boot time.

How to Create a ZFS BE With a ZFS Root File System and a Zone Root (at Least Solaris 10 5/09)

Use this procedure after you have performed an initial installation of at least the Solaris 10 5/09 release to create a ZFS root file system. Also use this procedure after you have used the luupgrade feature to upgrade a ZFS root file system to at least the Solaris 10 5/09 release. A ZFS BE that is created using this procedure can then be upgraded or patched.

In the steps that follow, the example Oracle Solaris 10 9/10 system has a ZFS root file system and a zone root dataset in /rpool/zones. A ZFS BE named zfs2BE is created and can then be upgraded or patched.

1. Review the existing ZFS file systems.

   # zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 7.26G 59.7G 98K /rpool rpool/ROOT 4.64G 59.7G 21K legacy rpool/ROOT/zfsBE 4.64G 59.7G 4.64G / rpool/dump 1.00G 59.7G 1.00G - rpool/export 44K 59.7G 23K /export rpool/export/home 21K 59.7G 21K /export/home rpool/swap 1G 60.7G 16K - rpool/zones 633M 59.7G 633M /rpool/zones

2. Ensure that the zones are installed and booted.

   # zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / native shared 2 zfszone running /rpool/zones native shared

3. Create the ZFS BE.

   # lucreate -n zfs2BE Analyzing system configuration. No name for current boot environment. INFORMATION: The current boot environment is not named - assigning name <zfsBE>. Current boot environment is named <zfsBE>. Creating initial configuration for primary boot environment <zfsBE>. The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID. PBE configuration successful: PBE name <zfsBE> PBE Boot Device </dev/dsk/c1t0d0s0>. Comparing source boot environment <zfsBE> file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment <zfs2BE>. Source boot environment is <zfsBE>. Creating boot environment <zfs2BE>. Cloning file systems from boot environment <zfsBE> to create boot environment <zfs2BE>. Creating snapshot for <rpool/ROOT/zfsBE> on <rpool/ROOT/zfsBE@zfs2BE>. Creating clone for <rpool/ROOT/zfsBE@zfs2BE> on <rpool/ROOT/zfs2BE>. Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/zfs2BE>. Population of boot environment <zfs2BE> successful. Creation of boot environment <zfs2BE> successful.

4. Activate the ZFS BE.

   # lustatus Boot Environment Is Active Active Can Copy Name Complete Now On Reboot Delete Status -------------------------- -------- ------ --------- ------ ---------- zfsBE yes yes yes no - zfs2BE yes no no yes - # luactivate zfs2BE A Live Upgrade Sync operation will be performed on startup of boot environment <zfs2BE>. . . . # init 6

5. Confirm that the ZFS file systems and zones are created in the new BE.

   # zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 7.38G 59.6G 98K /rpool rpool/ROOT 4.72G 59.6G 21K legacy rpool/ROOT/zfs2BE 4.72G 59.6G 4.64G / rpool/ROOT/zfs2BE@zfs2BE 74.0M - 4.64G - rpool/ROOT/zfsBE 5.45M 59.6G 4.64G /.alt.zfsBE rpool/dump 1.00G 59.6G 1.00G - rpool/export 44K 59.6G 23K /export rpool/export/home 21K 59.6G 21K /export/home rpool/swap 1G 60.6G 16K - rpool/zones 17.2M 59.6G 633M /rpool/zones rpool/zones-zfsBE 653M 59.6G 633M /rpool/zones-zfsBE rpool/zones-zfsBE@zfs2BE 19.9M - 633M - # zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / native shared - zfszone installed /rpool/zones native shared

How to Upgrade or Patch a ZFS Root File System With Zone Roots (at Least Solaris 10 5/09)

Use this procedure when you need to upgrade or patch a ZFS root file system with zone roots in at least the Solaris 10 5/09 release. These updates can either be a system upgrade or the application of patches.

In the steps that follow, zfs2BE, is the example name of the boot environment that is upgraded or patched.

1. Review the existing ZFS file systems.

   # zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 7.38G 59.6G 100K /rpool rpool/ROOT 4.72G 59.6G 21K legacy rpool/ROOT/zfs2BE 4.72G 59.6G 4.64G / rpool/ROOT/zfs2BE@zfs2BE 75.0M - 4.64G - rpool/ROOT/zfsBE 5.46M 59.6G 4.64G / rpool/dump 1.00G 59.6G 1.00G - rpool/export 44K 59.6G 23K /export rpool/export/home 21K 59.6G 21K /export/home rpool/swap 1G 60.6G 16K - rpool/zones 22.9M 59.6G 637M /rpool/zones rpool/zones-zfsBE 653M 59.6G 633M /rpool/zones-zfsBE rpool/zones-zfsBE@zfs2BE 20.0M - 633M -

2. Ensure that the zones are installed and booted.

   # zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / native shared 5 zfszone running /rpool/zones native shared

3. Create the ZFS BE to upgrade or patch.

   # lucreate -n zfs2BE Analyzing system configuration. Comparing source boot environment <zfsBE> file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment <zfs2BE>. Source boot environment is <zfsBE>. Creating boot environment <zfs2BE>. Cloning file systems from boot environment <zfsBE> to create boot environment <zfs2BE>. Creating snapshot for <rpool/ROOT/zfsBE> on <rpool/ROOT/zfsBE@zfs2BE>. Creating clone for <rpool/ROOT/zfsBE@zfs2BE> on <rpool/ROOT/zfs2BE>. Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/zfs2BE>. Creating snapshot for <rpool/zones> on <rpool/zones@zfs10092BE>. Creating clone for <rpool/zones@zfs2BE> on <rpool/zones-zfs2BE>. Population of boot environment <zfs2BE> successful. Creation of boot environment <zfs2BE> successful.

4. Select one of the following to upgrade the system or apply patches to the new boot environment:

   • Upgrade the system.

     # luupgrade -u -n zfs2BE -s /net/install/export/s10up/latest

     where the -s option specifies the ___location of the Solaris installation medium.

     This process can take a very long time.

     For a complete example of the luupgrade process, see Example 5–6.

   • Apply patches to the new boot environment.

     # luupgrade -t -n zfs2BE -t -s /patchdir patch-id-02 patch-id-04

5. Activate the new boot environment.

   # lustatus Boot Environment Is Active Active Can Copy Name Complete Now On Reboot Delete Status -------------------------- -------- ------ --------- ------ ---------- zfsBE yes yes yes no - zfs2BE yes no no yes - # luactivate zfs2BE A Live Upgrade Sync operation will be performed on startup of boot environment <zfs2BE>. . . .

6. Boot from the newly activated boot environment.

   # init 6

Example 5–6 Upgrading a ZFS Root File System With a Zone Root to a Oracle Solaris 10 9/10 ZFS Root File System

In this example, a ZFS BE (zfsBE), which was created on a Solaris 10 10/09 system with a ZFS root file system and zone root in a non root pool, is upgraded to the Oracle Solaris 10 9/10 release. This process can take a long time. Then, the upgraded BE (zfs2BE) is activated. Ensure that the zones are installed and booted before attempting the upgrade.

In this example, the zonepool pool, the /zonepool/zones dataset, and the zfszone zone are created as follows:

# zpool create zonepool mirror c2t1d0 c2t5d0
# zfs create zonepool/zones
# chmod 700 zonepool/zones
# zonecfg -z zfszone
zfszone: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:zfszone> create
zonecfg:zfszone> set zonepath=/zonepool/zones
zonecfg:zfszone> verify
zonecfg:zfszone> exit
# zoneadm -z zfszone install
cannot create ZFS dataset zonepool/zones: dataset already exists
Preparing to install zone <zfszone>.
Creating list of files to copy from the global zone.
Copying <8960> files to the zone.
.
.
.

# zoneadm list -cv
  ID NAME             STATUS     PATH                           BRAND    IP    
   0 global           running    /                              native   shared
   2 zfszone          running    /zonepool/zones                native   shared

# lucreate -n zfsBE
.
.
.
# luupgrade -u -n zfsBE -s /net/install/export/s10up/latest
40410 blocks
miniroot filesystem is <lofs>
Mounting miniroot at </net/system/export/s10up/latest/Solaris_10/Tools/Boot>
Validating the contents of the media </net/system/export/s10up/latest>.
The media is a standard Solaris media.
The media contains an operating system upgrade image.
The media contains <Solaris> version <10>.
Constructing upgrade profile to use.
Locating the operating system upgrade program.
Checking for existence of previously scheduled Live Upgrade requests.
Creating upgrade profile for BE <zfsBE>.
Determining packages to install or upgrade for BE <zfsBE>.
Performing the operating system upgrade of the BE <zfsBE>.
CAUTION: Interrupting this process may leave the boot environment unstable 
or unbootable.
Upgrading Solaris: 100% completed
Installation of the packages from this media is complete.
Updating package information on boot environment <zfsBE>.
Package information successfully updated on boot environment <zfsBE>.
Adding operating system patches to the BE <zfsBE>.
The operating system patch installation is complete.
INFORMATION: The file </var/sadm/system/logs/upgrade_log> on boot 
environment <zfsBE> contains a log of the upgrade operation.
INFORMATION: The file </var/sadm/system/data/upgrade_cleanup> on boot 
environment <zfsBE> contains a log of cleanup operations required.
INFORMATION: Review the files listed above. Remember that all of the files 
are located on boot environment <zfsBE>. Before you activate boot 
environment <zfsBE>, determine if any additional system maintenance is 
required or if additional media of the software distribution must be 
installed.
The Solaris upgrade of the boot environment <zfsBE> is complete.
Installing failsafe
Failsafe install is complete.
# luactivate zfsBE
# init 6
# lustatus
Boot Environment           Is       Active Active    Can    Copy      
Name                       Complete Now    On Reboot Delete Status    
-------------------------- -------- ------ --------- ------ ----------
zfsBE                      yes      no     no        yes    -         
zfs2BE                     yes      yes    yes       no     -         
# zoneadm list -cv
  ID NAME             STATUS     PATH                           BRAND    IP    
   0 global           running    /                              native   shared
   - zfszone          installed  /zonepool/zones                native   shared

How to Migrate a UFS Root File System With a Zone Root to a ZFS Root File System (at Least Solaris 10 5/09)

Use this procedure to migrate a system with a UFS root file system and a zone root to at least the Solaris 10 5/09 release. Then, use Oracle Solaris Live Upgrade to create a ZFS BE.

In the steps that follow, the example UFS BE name is c0t1d0s0, the UFS zone root is zonepool/zfszone, and the ZFS root BE is zfsBE.

1. Upgrade the system to at least the Solaris 10 5/09 release if it is running a previous Solaris 10 release.

   For information about upgrading a system that is running the Solaris 10 release, see Oracle Solaris 10 9/10 Installation Guide: Solaris Live Upgrade and Upgrade Planning.

2. Create the root pool.

   For information about the root pool requirements, see Oracle Solaris Installation and Oracle Solaris Live Upgrade Requirements for ZFS Support.

3. Confirm that the zones from the UFS environment are booted.

   # zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / native shared 2 zfszone running /zonepool/zones native shared

4. Create the new ZFS boot environment.

   # lucreate -c c1t1d0s0 -n zfsBE -p rpool

   This command establishes datasets in the root pool for the new boot environment and copies the current boot environment (including the zones) to those datasets.

5. Activate the new ZFS boot environment.

   # lustatus Boot Environment Is Active Active Can Copy Name Complete Now On Reboot Delete Status -------------------------- -------- ------ --------- ------ ---------- c1t1d0s0 yes no no yes - zfsBE yes yes yes no - # luactivate zfsBE A Live Upgrade Sync operation will be performed on startup of boot environment <zfsBE>. . . .

6. Reboot the system.

   # init 6

7. Confirm that the ZFS file systems and zones are created in the new BE.

   # zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 6.17G 60.8G 98K /rpool rpool/ROOT 4.67G 60.8G 21K /rpool/ROOT rpool/ROOT/zfsBE 4.67G 60.8G 4.67G / rpool/dump 1.00G 60.8G 1.00G - rpool/swap 517M 61.3G 16K - zonepool 634M 7.62G 24K /zonepool zonepool/zones 270K 7.62G 633M /zonepool/zones zonepool/zones-c1t1d0s0 634M 7.62G 633M /zonepool/zones-c1t1d0s0 zonepool/zones-c1t1d0s0@zfsBE 262K - 633M - # zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / native shared - zfszone installed /zonepool/zones native shared

Example 5–7 Migrating a UFS Root File System With a Zone Root to a ZFS Root File System

In this example, a Oracle Solaris 10 9/10 system with a UFS root file system and a zone root (/uzone/ufszone), as well as a ZFS non-root pool (pool) and a zone root (/pool/zfszone), is migrated to a ZFS root file system. Ensure that the ZFS root pool is created and that the zones are installed and booted before attempting the migration.

# zoneadm list -cv
  ID NAME             STATUS     PATH                           BRAND    IP    
   0 global           running    /                              native   shared
   2 ufszone          running    /uzone/ufszone                 native   shared
   3 zfszone          running    /pool/zones/zfszone            native   shared

# lucreate -c ufsBE -n zfsBE -p rpool
Analyzing system configuration.
No name for current boot environment.
Current boot environment is named <zfsBE>.
Creating initial configuration for primary boot environment <zfsBE>.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID.
PBE configuration successful: PBE name <ufsBE> PBE Boot Device </dev/dsk/c1t0d0s0>.
Comparing source boot environment <ufsBE> file systems with the file 
system(s) you specified for the new boot environment. Determining which 
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Updating system configuration files.
The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment; cannot get BE ID.
Creating configuration for boot environment <zfsBE>.
Source boot environment is <ufsBE>.
Creating boot environment <zfsBE>.
Creating file systems on boot environment <zfsBE>.
Creating <zfs> file system for </> in zone <global> on <rpool/ROOT/zfsBE>.
Populating file systems on boot environment <zfsBE>.
Checking selection integrity.
Integrity check OK.
Populating contents of mount point </>.
Copying.
Creating shared file system mount points.
Copying root of zone <ufszone> to </.alt.tmp.b-EYd.mnt/uzone/ufszone>.
Creating snapshot for <pool/zones/zfszone> on <pool/zones/zfszone@zfsBE>.
Creating clone for <pool/zones/zfszone@zfsBE> on <pool/zones/zfszone-zfsBE>.
Creating compare databases for boot environment <zfsBE>.
Creating compare database for file system </rpool/ROOT>.
Creating compare database for file system </>.
Updating compare databases on boot environment <zfsBE>.
Making boot environment <zfsBE> bootable.
Creating boot_archive for /.alt.tmp.b-DLd.mnt
updating /.alt.tmp.b-DLd.mnt/platform/sun4u/boot_archive
Population of boot environment <zfsBE> successful.
Creation of boot environment <zfsBE> successful.
# lustatus
Boot Environment           Is       Active Active    Can    Copy      
Name                       Complete Now    On Reboot Delete Status    
-------------------------- -------- ------ --------- ------ ----------
ufsBE                      yes      yes    yes       no     -         
zfsBE                      yes      no     no        yes    -         
# luactivate zfsBE    
.
.
.
# init 6
.
.
.
# zfs list
NAME                                    USED  AVAIL  REFER  MOUNTPOINT
pool                                    628M  66.3G    19K  /pool
pool/zones                              628M  66.3G    20K  /pool/zones
pool/zones/zfszone                     75.5K  66.3G   627M  /pool/zones/zfszone
pool/zones/zfszone-ufsBE                628M  66.3G   627M  /pool/zones/zfszone-ufsBE
pool/zones/zfszone-ufsBE@zfsBE           98K      -   627M  -
rpool                                  7.76G  59.2G    95K  /rpool
rpool/ROOT                             5.25G  59.2G    18K  /rpool/ROOT
rpool/ROOT/zfsBE                       5.25G  59.2G  5.25G  /
rpool/dump                             2.00G  59.2G  2.00G  -
rpool/swap                              517M  59.7G    16K  -
# zoneadm list -cv
  ID NAME             STATUS     PATH                           BRAND    IP    
   0 global           running    /                              native   shared
   - ufszone          installed  /uzone/ufszone                 native   shared
   - zfszone          installed  /pool/zones/zfszone            native   shared