Densification, surface morphology, microstructure and mechanical properties of 316L fabricated by hybrid manufacturing

1. Vega EJ, Cabezas MG, Munoz-Sanchez BN, Montanero JM, Ganan-Calvo AM (2014) A novel technique to produce metallic microdrops for additive manufacturing. Int J Adv Manuf Technol 70(5–8):1395–1402

   Article  Google Scholar 

2. Bikas H, Stavropoulos P, Chryssolouris G (2016) Additive manufacturing methods and modelling approaches: a critical review. Int J Adv Manuf Technol 83(1–4):389–405

   Article  Google Scholar 

3. Ciurana J, Hernandez L, Delgado J (2013) Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material. Int J Adv Manuf Technol 68(5–8):1103–1110

   Article  Google Scholar 

4. Neela V, De A (2009) Three-dimensional heat transfer analysis of LENSTM process using finite element method. Int J Adv Manuf Technol 45(9–10):935–943

   Article  Google Scholar 

5. Gaja H, Liou F (2018) Defect classification of laser metal deposition using logistic regression and artificial neural networks for pattern recognition. Int J Adv Manuf Technol 94(1–4):315–326

   Article  Google Scholar 

6. Khan SZ, Masood SH, Cottam R (2017) Mechanical properties of a novel plymetal manufactured by laser-assisted direct metal deposition. Int J Adv Manuf Technol 91(5–8):1839–1849

   Article  Google Scholar 

7. Gorunov AI, Gilmutdinov AK (2016) Study of the effect of heat treatment on the structure and properties of the specimens obtained by the method of direct metal deposition. Int J Adv Manuf Technol 86(9–12):2567–2574

   Article  Google Scholar 

8. Ganci M, Zhu W, Buffa G, Fratini L, Bo S, Yan CZ (2017) A macroscale FEM-based approach for selective laser sintering of thermoplastics. Int J Adv Manuf Technol 91(9–12):3169–3180

   Article  Google Scholar 

9. Liu Y, Zhang J, Pang ZC (2018) Numerical and experimental investigation into the subsequent thermal cycling during selective laser melting of multi-layer 316L stainless steel. Opt Laser Technol 98:23–32

   Article  Google Scholar 

10. AlMangour B, Grzesiak D, Yang JM (2017) Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites. J Alloy Compd 728:424–435

    Article  Google Scholar 

11. Lalehpour A, Janeteas C, Barari A (2018) Surface roughness of FDM parts after post-processing with acetone vapor bath smoothing process. Int J Adv Manuf Technol 95(1–4):1505–1520

    Article  Google Scholar 

12. Levy GN, Schindel R, Kruth JP (2003) Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives. CIRP Ann-Manuf Technol 52(2):589–609

    Article  Google Scholar 

13. Kruth JP, Levy G, Klocke F, Childs THC (2007) Consolidation phenomena in laser and powder-bed based layered manufacturing. CIRP Ann-Manuf Technol 56(2):730–759

    Article  Google Scholar 

14. Paris H, Mokhtarian H, Coatanea E, Museau M, Ituarte IF (2016) Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Ann-Manuf Technol 65(1):29–32

    Article  Google Scholar 

15. Karunakaran KP, Suryakumar S, Pushpa V, Akula S (2009) Retrofitment of a CNC machine for hybrid layered manufacturing. Int J Adv Manuf Technol 45(7–8):690–703

    Article  Google Scholar 

16. Kerbrat O, Mognol P, Hascoet JY (2010) Manufacturability analysis to combine additive and subtractive processes. Rapid Prototyp J 16(1):63–72

    Article  Google Scholar 

17. Kerbrat O, Mognol P, Hascoet JY (2011) A new DFM approach to combine machining and additive manufacturing. Comput Ind 62(7):684–692

    Article  Google Scholar 

18. Newman ST, Zhu Z, Dhokia V, Shokrani A (2015) Process planning for additive and subtractive manufacturing technologies. CIRP Ann Manuf Technol 64(1):467–470

    Article  Google Scholar 

19. Yasa E, Kruth JP, Deckers J (2011) Manufacturing by combining selective laser melting and selective laser erosion/laser re-melting. CIRP Ann-Manuf Technol 60(1):263–266

    Article  Google Scholar 

20. Lauwers B, Klocke F, Klink A, Tekkaya AE, Neugebauer R, Mcintosh D (2014) Hybrid processes in manufacturing. CIRP Ann-Manuf Technol 63(2):561–583

    Article  Google Scholar 

21. Zhu Z, Dhokia V, Newman ST, Nassehi A (2014) Application of a hybrid process for high precision manufacture of difficult to machine prismatic parts. Int J Adv Manuf Technol 74(5–8):1115–1132

    Article  Google Scholar 

22. Du W, Bai Q, Zhang B (2018) Machining characteristics of 18Ni-300 steel in additive/subtractive hybrid manufacturing. Int J Adv Manuf Technol 95(5–8):2509–2519

    Article  Google Scholar 

23. Unique One Process Solution: Laser sintering and milling. Matsuura Corporation, Available:http://wwwmatsuuracojp/english/contents/products/lumexhtml, 2015 (accessed 2604.15)

24. Lasertec-65-3d, DMG MORI SEIKI, 2015. [Online]. Available: http://uk.dmgmori.com/products/lasertec/lasertec-additivemanufacturing/lasertec-65-3d, 2015 (Online, accessed 26.04.15)

25. Lee WC, Wei CC, Chung SC (2014) Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining. J Mater Process Technol 214(11):2366–2374

    Article  Google Scholar 

26. AlMangour B, Grzesiak D, Borkar T, Yang JM (2018) Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting. Mater Des 138:119–128

    Article  Google Scholar 

27. AlMangour B, Grzesiak D, Yang JM (2016) Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting. J Alloy Compd 680:480–493

    Article  Google Scholar 

28. AlMangour B, Grzesiak D, Yang JM (2016) Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: influence of starting TiC particle size and volume content. Mater Des 104:141–151

    Article  Google Scholar 

29. Liverani E, Toschi S, Ceschini L, Fortunato A (2017) Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel. J Mater Process Tech 249:255–263

    Article  Google Scholar 

30. Yusuf SM, Chen YF, Boardman R, Yang SF, Gao N (2017) Investigation on porosity and microhardness of 316L stainless steel fabricated by selective laser melting. Metals 7(2). https://doi.org/10.3390/met7020064

31. Yasa E, Kruth JP, Deckers J (2011) Manufacturing by combining selective laser melting and selective laser erosion/laser re-melting. CIRP Ann-Manuf Technol 60(1):263–266

    Article  Google Scholar 

32. Kasperovich G, Hausmann J (2015) Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting. J Mater Process Tech 220:202–214

    Article  Google Scholar 

33. Alsalla HH, Smith C, Hao L (2018) Effect of build orientation on the surface quality, microstructure and mechanical properties of selective laser melting 316L stainless steel. Rapid Prototyping J 24(1):9–17

    Article  Google Scholar 

34. Spierings AB, Schneider M, Eggenberger R (2011) Comparison of density measurement techniques for additive manufactured metallic parts. Rapid Prototyp J 17(5):380–386

    Article  Google Scholar 

35. Bartolomeu F, Buciumeanu M, Pinto E, Alves N, Carvalho O, Silva FS, Miranda G (2017) 316L stainless steel mechanical and tribological behavior—a comparison between selective laser melting, hot pressing and conventional casting. Additive Manufacturing 21:150–158

    Google Scholar 

36. Yadollahi A, Shamsaei N, Thompson SM, Seely DW (2015) Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel. Mat Sci Eng A-Struct 644:171–183

    Article  Google Scholar 

Download references