PermaStat® 600 UV

Acrylonitrile Butadiene Styrene www.ulprospector.com

RTP Company
Technical Data
Product Description
ESD Protection - Permanently Anti-static - UV Stabilized
General
Material Status • Commercial: Active
Search for UL Yellow Card • RTP Company
• Africa & Middle East • Europe
Availability • North America
• Asia Pacific • Latin America
Additive • UV Stabilizer
Features • Antistatic • ESD Protection • UV Stabilized
RoHS Compliance • Contact Manufacturer
Processing Method • Injection Molding

Physical Nominal Value Unit Test Method

Density / Specific Gravity 1.06 g/cm³ ASTM D792
Molding Shrinkage - Flow (3.20 mm) 0.50 to 0.70 % ASTM D955
Moisture Content 0.10 %
Mechanical Nominal Value Unit Test Method
Tensile Modulus 2070 MPa ASTM D638
Tensile Strength 41.4 MPa ASTM D638
Tensile Elongation (Yield) > 10 % ASTM D638
Flexural Modulus 1720 MPa ASTM D790
Flexural Strength 68.9 MPa ASTM D790
Impact Nominal Value Unit Test Method
Notched Izod Impact (3.20 mm) 270 J/m ASTM D256
Unnotched Izod Impact (3.20 mm) No Break ASTM D4812
Electrical Nominal Value Unit Test Method
Surface Resistivity
-- 1.0E+9 to 9.9E+10 ohms ESD STM11.11
-- 1.0E+10 to 9.9E+11 ohms ASTM D257
Volume Resistivity 1.0E+9 to 9.9E+10 ohms·cm ASTM D257
Static Decay 2 < 2.0 sec FTMS 101C 4046.1

Injection Nominal Value Unit

Drying Temperature 82 °C
Drying Time 2.0 hr
Dew Point -18 °C
Processing (Melt) Temp 199 to 238 °C
Mold Temperature 49 to 93 °C
Injection Pressure 68.9 to 103 MPa
Injection Notes
Do not exceed 520 °F (270 °C) melt temperature.
Desiccant Type Dryer Required.

Notes
1 Typical properties: these are not to be construed as specifications.
2 MIL-PRF-81705D, 5kV to 50 V, 12% RH

1 of 2 Form No. TDS-47043-en

UL and the UL logo are trademarks of UL LLC © 2019. All Rights Reserved. Document Created: Monday, December 9, 2019
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: November 2000
Last Updated: 3/23/2018
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
PermaStat® 600 UV
Acrylonitrile Butadiene Styrene
RTP Company www.ulprospector.com

Where to Buy

Supplier
RTP Company
Winona, MN USA
Telephone: 800-433-4787
Web: http://www.rtpcompany.com/

Distributor
Please contact the supplier to find a distributor for PermaStat® 600 UV

2 of 2 Form No. TDS-47043-en

UL and the UL logo are trademarks of UL LLC © 2019. All Rights Reserved. Document Created: Monday, December 9, 2019
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: November 2000
Last Updated: 3/23/2018
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.