Scribd
Upload
104 views

Heatmasters: Mobile Heat Treatment Equipment

HM30A is a small, lightweight, inverter-based preheating unit used for induction and resistor heating of tubes during welding. It maintains an even temperature during welding and is easy to adjust due to its mobile design. Key specifications include a heating power of 3.5 kW, temperature range of 20-400°C, and dimensions of 375x150x380mm. The unit can preheat tubes from 26.6-323.9mm in diameter using included preheating coils and connection cables. Larger tubes requiring higher temperatures or more rounds of heating may require two HM30A units connected in parallel.

Uploaded by

Anand Sankar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
104 views

Heatmasters: Mobile Heat Treatment Equipment

HM30A is a small, lightweight, inverter-based preheating unit used for induction and resistor heating of tubes during welding. It maintains an even temperature during welding and is easy to adjust due to its mobile design. Key specifications include a heating power of 3.5 kW, temperature range of 20-400°C, and dimensions of 375x150x380mm. The unit can preheat tubes from 26.6-323.9mm in diameter using included preheating coils and connection cables. Larger tubes requiring higher temperatures or more rounds of heating may require two HM30A units connected in parallel.

Uploaded by

Anand Sankar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HeatMasters

MOBILE HEAT TREATMENT EQUIPMENT

HM30A
HM30A is an inverter based semi-automatic preheating unit Because HM30A stands next to the worked object,
especially for tubes. It is used for induction and resistor adjustments are easy to make.
heating. HM30A is small and light in weight, which enables
easy handling and transportation.
HM30A maintains an even temperature of the tube during
welding.
Technical data
Easy to use
Temperature measuring can be carried out with or without a
thermocouple. If needed the temperature is recorded by using Connection voltage 220 ... 240 V; one phase
a separate temperature recorder. Mains current socket Heating power 3,5 kW, ED 100 %
provides power for the unit, which enables the use of short Fuse 16 A, slow
cables. Secondary voltage 0 ...70 V
HM30A has one processor regulator, which is used for adjusting Secondary current 0 ... 70 A
heat treatment parameters. Heating channels 1 pcs
By thermocouple use the regulator shows the temperature and Temperature range 20 ... 400 °C
the following parameters can be adjusted: Control system Processor controller
* Heating rate [°C/h] Alarm Signal light for overload
* Holding temperature [°C] Dimensions Length 375 mm
If the thermocouple is not in use, but instead the so called Width 150 mm
percentage use is applied, then the heating power is regulated in Height 380 mm
percentage ration and the temperature is measured with an external Weight 11 kg
measuring device.
INDUCTIVE PREHEATING WITH ONE HM30A UNIT, TUBE DIAMETERS 26,6 ... 323,9 MM

Equipment
Product no qty Product
1000504 1 HM30A
1101002 1 Secondary cable
1400502 2 Preheating coil
1102502 1 Jumper cable

Induction coilas are placed on both sides of the welding


seam and connected to the series with the jumper cable.

CAPACITY WITH ONE HM30A UNIT

Pipe Ø [mm] 26,6 33,7 42,2 60,3 76,1 88,9 114,3 139,7 219,7 273,0 323,9
Coil length [m] 1,0 + 1,0 1,0 + 1,0 1,0 + 1,0 1,5 + 1,5 1,5 + 1,5 1,5 + 1,5 2,0 + 2,0 2,5 + 2,5 3,5 + 3,5 3,5 + 3,5 3,5 + 3,5
Rounds 4+4 4+4 4+4 4+4 4+4 4+4 4+4 4+4 4+4 3+3 3+3
Temp. [°C] 20 ... 400 20 ... 400 20 ... 400 20 ... 400 20 .. 400 20 ... 400 20 ... 400 20 ... 400 20 ... 350 20 ... 250 20 ... 250

INDUCTIVE PREHEATING WITH TWO HM30A UNITS

CAPACITY WITH TWO HM30A UNITS Equipment


Product no qty Product
Pipe Ø mm 273,0 323,9
1000504 2 HM30A
Coil length m 3,5 + 3,5 3,5 + 3,5
1101002 2 Secondary cable
Rounds 3+3 3+3
1400502 2 Preheating coil
Temperature °C 20 ... 350 20 ... 350
Both HM30 units will be connected to their own
induction coils

Heatmasters Oy
Koneharjunkatu 6 Tel +358 3 882770
FIN-15860 Lahti Fax +358 3 8811770
Finland E-mail [email protected]

You might also like