Scribd
Upload
58 views

Untitled

The document contains logs from multiple attempts to read information from and start sessions with the ECU of different Mazda vehicles using various firmware templates. All attempts resulted in errors, with the ECU returning invalid command responses to challenges and an inability to read responses. The ECU part number was consistently identified as N3J1EG00013H6F10 across attempts.

Uploaded by

Hendy Yurinata Singgih
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
58 views

Untitled

The document contains logs from multiple attempts to read information from and start sessions with the ECU of different Mazda vehicles using various firmware templates. All attempts resulted in errors, with the ECU returning invalid command responses to challenges and an inability to read responses. The ECU part number was consistently identified as N3J1EG00013H6F10 across attempts.

Uploaded by

Hendy Yurinata Singgih
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

-- New session started at 2/18/2021 12:30:44 PM : Read Information with template

Mazda RX8 (A) CAN ECU --

[0.000] found OpenPort 2.0 (J2534) cable


[0.000] program version: 3.8.28.994
[0.000] dongle id: TAOpCwYB
[0.000] firmware version: 1.17.4877
[0.000] library version: 1.00.3147 Sep 3 2010 00:17:29
[1.844] CAN init...
[0.000] ECU SW partnumber: N3J1EG00013H6F10
[0.016] ECU VIN: JMZSE173600123830
[0.000]
[0.000] you should use N3J1EG00013H6F10 firmware as base file for this ECU

-- New session started at 2/18/2021 12:30:50 PM : Read process with template Mazda
RX8 (A) CAN ECU --

[0.000] loading kernel from file C:\Program Files (x86)\mazdaEdit v3\kernels\


mazda_rx8.bin
[0.000] 19664 byte kernel read
[0.031] found OpenPort 2.0 (J2534) cable
[0.000] program version: 3.8.28.994
[0.000] dongle id: TAOpCwYB
[0.000] firmware version: 1.17.4877
[0.015] library version: 1.00.3147 Sep 3 2010 00:17:29
[1.954] CAN init...
[0.000] ECU SW partnumber: N3J1EG00013H6F10
[0.015] ECU VIN: JMZSE173600123830
[0.000] requesting challenge...
[0.016] sending challenge...
[0.000] can: invalid cmd response [7F2735]
[0.000] unable to read response
[0.015] challenge is not accepted
[0.032] Errors occured

-- New session started at 2/18/2021 12:34:12 PM : Read process with template Mazda
RX8 (A) CAN ECU --

[0.000] loading kernel from file C:\Program Files (x86)\mazdaEdit v3\kernels\


mazda_rx8.bin
[0.016] 19664 byte kernel read
[0.047] found OpenPort 2.0 (J2534) cable
[0.015] program version: 3.8.28.994
[0.016] dongle id: TAOpCwYB
[0.016] firmware version: 1.17.4877
[0.015] library version: 1.00.3147 Sep 3 2010 00:17:29
[2.860] CAN init...
[0.015] ECU SW partnumber: N3J1EG00013H6F10
[0.000] ECU VIN: JMZSE173600123830
[0.016] starting session...
[0.000] can: invalid cmd response [7F1022]
[0.015] unable to read response #1
[0.016] Errors occured

-- New session started at 2/18/2021 12:41:33 PM : Read Information with template


Mazda RX8 (A) CAN ECU --

[0.000] found OpenPort 2.0 (J2534) cable


[0.016] program version: 3.8.28.994
[0.000] dongle id: TAOpCwYB
[0.000] firmware version: 1.17.4877
[0.015] library version: 1.00.3147 Sep 3 2010 00:17:29
[2.235] CAN init...
[0.000] ECU SW partnumber: N3J1EG00013H6F10
[0.015] ECU VIN: JMZSE173600123830
[0.000]
[0.016] you should use N3J1EG00013H6F10 firmware as base file for this ECU

-- New session started at 2/18/2021 12:43:00 PM : Read process with template Mazda
RX8 (A) CAN ECU --

[0.000] loading kernel from file C:\Program Files (x86)\mazdaEdit v3\kernels\


mazda_rx8.bin
[0.000] 19664 byte kernel read
[0.031] found OpenPort 2.0 (J2534) cable
[0.000] program version: 3.8.28.994
[0.016] dongle id: TAOpCwYB
[0.000] firmware version: 1.17.4877
[0.015] library version: 1.00.3147 Sep 3 2010 00:17:29
[1.907] CAN init...
[0.000] ECU SW partnumber: N3J1EG00013H6F10
[0.015] ECU VIN: JMZSE173600123830
[0.016] requesting challenge...
[0.015] sending challenge...
[0.016] can: invalid cmd response [7F2735]
[0.016] unable to read response
[0.000] challenge is not accepted
[0.031] Errors occured

-- New session started at 2/18/2021 12:43:21 PM : Read process with template Mazda
RX8 (B) CAN ECU --

[0.000] loading kernel from file C:\Program Files (x86)\mazdaEdit v3\kernels\


mazda_rx8_2.bin
[0.015] 19664 byte kernel read
[0.016] found OpenPort 2.0 (J2534) cable
[0.016] program version: 3.8.28.994
[0.015] dongle id: TAOpCwYB
[0.000] firmware version: 1.17.4877
[0.016] library version: 1.00.3147 Sep 3 2010 00:17:29
[1.312] CAN init...
[0.016] ECU SW partnumber: N3J1EG00013H6F10
[0.016] ECU VIN: JMZSE173600123830
[0.015] requesting challenge...
[0.000] sending challenge...
[0.016] can: invalid cmd response [7F2735]
[0.015] unable to read response
[0.032] challenge is not accepted
[0.031] Errors occured

-- New session started at 2/18/2021 12:43:41 PM : Read process with template Mazda
MX-5 NC (MY2009+) [1MB] --

[0.000] loading kernel from file C:\Program Files (x86)\mazdaEdit v3\kernels\


mazda_mx5_09.bin
[0.000] 19664 byte kernel read
[0.031] found OpenPort 2.0 (J2534) cable
[0.000] program version: 3.8.28.994
[0.016] dongle id: TAOpCwYB
[0.000] firmware version: 1.17.4877
[0.015] library version: 1.00.3147 Sep 3 2010 00:17:29
[1.594] CAN init...
[0.016] ECU SW partnumber: N3J1EG00013H6F10
[0.000] ECU VIN: JMZSE173600123830
[0.015] requesting challenge...
[0.016] sending challenge...
[0.015] can: invalid cmd response [7F2735]
[0.000] unable to read response
[0.032] challenge is not accepted
[0.015] Errors occured

-- New session started at 2/18/2021 12:43:50 PM : Read process with template Mazda
MX-5 NC (-MY2008) [1MB] --

[0.000] loading kernel from file C:\Program Files (x86)\mazdaEdit v3\kernels\


mazda_mx5.bin
[0.015] 17472 byte kernel read
[0.016] found OpenPort 2.0 (J2534) cable
[0.015] program version: 3.8.28.994
[0.000] dongle id: TAOpCwYB
[0.016] firmware version: 1.17.4877
[0.000] library version: 1.00.3147 Sep 3 2010 00:17:29
[1.750] CAN init...
[0.016] ECU SW partnumber: N3J1EG00013H6F10
[0.000] ECU VIN: JMZSE173600123830
[0.015] requesting challenge...
[0.016] sending challenge...
[0.016] can: invalid cmd response [7F2735]
[0.000] unable to read response
[0.031] challenge is not accepted
[0.031] Errors occured

-- New session started at 2/18/2021 12:43:56 PM : Read Information with template


Mazda MX-5 NC (-MY2008) [1MB] --

[0.000] found OpenPort 2.0 (J2534) cable


[0.015] program version: 3.8.28.994
[0.000] dongle id: TAOpCwYB
[0.000] firmware version: 1.17.4877
[0.016] library version: 1.00.3147 Sep 3 2010 00:17:29
[2.141] CAN init...
[0.015] ECU SW partnumber: N3J1EG00013H6F10
[0.016] ECU VIN: JMZSE173600123830
[0.000]
[0.015] you should use N3J1EG00013H6F10 firmware as base file for this ECU

-- New session started at 2/18/2021 12:45:21 PM : Read process with template Mazda
RX8-R3 CAN ECU [1Mb] --

[0.000] loading kernel from file C:\Program Files (x86)\mazdaEdit v3\kernels\


mazda_rx8_58.bin
[0.000] 19664 byte kernel read
[0.031] found OpenPort 2.0 (J2534) cable
[0.016] program version: 3.8.28.994
[0.000] dongle id: TAOpCwYB
[0.094] firmware version: 1.17.4877
[0.000] library version: 1.00.3147 Sep 3 2010 00:17:29
[2.094] CAN init...
[0.015] ECU SW partnumber: N3J1EG00013H6F10
[0.016] ECU VIN: JMZSE173600123830
[0.000] requesting challenge...
[0.015] sending challenge...
[0.016] can: invalid cmd response [7F2735]
[0.016] unable to read response
[0.015] challenge is not accepted
[0.032] Errors occured

You might also like