GE

Technical Publication
Vivid™ T8/Vivid T8 Pro
Proprietary Service Manual
Direction Number: 5718825-100 English
Rev. 15

ADVANCED SERVICE DOCUMENTATION. PROPERTY OF

GE HEALTHCARE. USE OF THESE MATERIALS LIMITED TO AGENTS AND
EMPLOYEES OF GE HEALTHCARE OR OTHER PARTIES EXPRESSLY
LICENSED BY GE HEALTHCARE. UNLICENSED USE IS STRICTLY
PROHIBITED.
All Material Copyright © 2015-2023 by General Electric Company Inc.
All Rights Reserved.
Product Information

This manual is a reference for the Vivid T8, Vivid T8 Pro. It applies to all versions of
the R1.x.x, R2.x.x software for the Vivid T8 ultrasound system. It applies to all
versions of the R1.x.x software for the Vivid T8 Pro ultrasound system.

GE

Copyright © 2015-2023, General Electric Company.

GE Medical Systems, a General Electric Company, going to
market as GE Healthcare
Manufacturer:
GE Medical Systems (China) Co., Ltd.
No. 19, Changjiang Road
Wuxi National Hi-Tech Dev. Zone
214028 Jiangsu China
TEL: +86 510 85225888; FAX: +86 510 85226688
www.gehealthcare.com
Revision history
Revision History

DATE 3
REV (YYYY/MM/DD) REASON FOR CHANGE

Rev. 01 2015/08/31 Initial Release

Rev. 02 2016/03/09 Update spare part list

Rev. 03 2016/08/16 Add new spare parts

Rev. 04 2016/09/19 Update unpacking section and probe part number

Rev. 05 2016/10/25 Update spare part list

Rev. 06 2017/08/24 Add monitor configuration information and update spare

part list

Rev. 07 2017/10/10 Update flexible arm information and spare part list

Rev. 08 2018/03/26 Update FRU list

Rev. 09 2018/09/03 Update battery description

Rev. 10 2018/09/21 Update renewal part list

Rev. 11 2019/04/30 Update renewal part list to add 5479055-S,

5489678-S,and 5456424-S

Rev. 12 2019/12/25 Update renewal part list to add 5831001

Rev. 13 2020/03/09 Update renewal part list

Rev. 14 2022/12/22 Update the Mounting Procedure for WMST PWA

Update renewal part list
Update the Phone numbers for Customer Assistance
Add icelandic declaration
Update 5693411-S AQUA R2 Touch Panel module Cable
SVC
Add 5457698-S
Update rewrite the serial number
Update Accessories and Cable kits in CH9
Update graphics for power cord clip

Rev.15 2023/06/30 1. Add a comment below part 549055-S

2. Correct part number for 12S-RS
3. Correct the compatibility for 5456663-5-S
4. Add 5479052-S
5. Update printer list
6. Add battery replacement and disposition information

Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-1

5718825-100 English Rev. 15 System view
 List of Effected Pages (LOEP)

REVISION REVISION
CHAPTER NUMBER NUMBER CHAPTER NUMBER NUMBER

Front Rev. 15 Chapter 6 Rev. 15

Front matter Rev. 15 Chapter 7 Rev. 15

TOC Rev. 15 Chapter 8 Rev. 15

Chapter 1 Rev. 15 Chapter 9 Rev. 15

Chapter 2 Rev. 15 Chapter 10 Rev. 15

Chapter 3 Rev. 15 Index Rev. 15

Chapter 4 Rev. 15 Rear Cover Rev. 15

Chapter 5 Rev. 15

Please verify that you are using the latest revision of this document. Information
pertaining to this document is maintained on MyWorkshop/ePDM (GE electronic Product
Data Management). If you need to know the latest revision, contact your distributor, local
GE Sales Representative or in the USA call the GE Ultrasound Clinical Answer Center at
1 800 682 5327 or 1 262 524 5698.

i-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
Important precautions

Translation policy

Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-3

5718825-100 English Rev. 15 System view
i-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual
System view 5718825-100 English Rev. 15
Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-5
5718825-100 English Rev. 15 System view
i-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual
System view 5718825-100 English Rev. 15
Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-7
5718825-100 English Rev. 15 System view
i-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual
System view 5718825-100 English Rev. 15
Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-9
5718825-100 English Rev. 15 System view
i-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual
System view 5718825-100 English Rev. 15
Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-11
5718825-100 English Rev. 15 System view
i-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual
System view 5718825-100 English Rev. 15
Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-13
5718825-100 English Rev. 15 System view
i-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual
System view 5718825-100 English Rev. 15
Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-15
5718825-100 English Rev. 15 System view
Damage in transportation
All packages should be closely examined at time of delivery. If
damage is apparent, write “Damage In Shipment” on ALL copies
of the freight or express bill BEFORE delivery is accepted or
“signed for” by a GE representative or hospital receiving agent.
Whether noted or concealed, damage MUST be reported to the
carrier immediately upon discovery, or in any event, within 14
days after receipt, and the contents and containers held for
inspection by the carrier. A transportation company will not pay a
claim for damage if an inspection is not requested within this 14
day period.

Certified electrical contractor statement - For USA Only

All electrical Installations that are preliminary to positioning of
the equipment at the site prepared for the equipment shall be
performed by licensed electrical contractors. Other connections
between pieces of electrical equipment, calibrations and testing
shall be performed by qualified GE Healthcare personnel. In
performing all electrical work on these products, GE will use its
own specially trained field engineers. All of GE’s electrical work
on these products will comply with the requirements of the
applicable electrical codes.
The purchaser of GE equipment shall only utilize qualified
personnel (i.e., GE’s field engineers, personnel of third-party
service companies with equivalent training, or licensed
electricians) to perform electrical servicing on the equipment.

i-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
Omission and errors
If there are any omissions, errors or suggestions for improving
this documentation, contact the GE Healthcare Global
Documentation Group with specific information listing the
system type, manual title, part number, revision number, page
number and suggestion details.
Mail the GE Medical Systems (China) Co., Ltd.
information to: No. 19 Changiang Road
Wuxi National Hi-Tech Dev. Zone
214028 Jiangsu China

GE employees should use TrackWise to report service

documentation issues.
These issues will then be in the internal problem reporting tool
and communicated to the writer.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-17

5718825-100 English Rev. 15 System view
Service Safety Considerations

DANGER DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH,

ARE PRESENT IN THIS EQUIPMENT. USE EXTREME
CAUTION WHEN HANDLING, TESTING AND ADJUSTING.

WARNING Use all Personal Protection Equipment (PPE) such as gloves,

safety shoes, safety glasses, and kneeling pad, to reduce the
risk of injury.

For a complete review of all safety requirements, refer to

Chapter 1 in the Service Manual.

i-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
Legal notes
The contents of this publication may not be copied or duplicated
in any form, in whole or in part, without prior written permission
of GE Healthcare.
GE Healthcare may revise this publication from time to time
without written notice.

Proprietary to GE Healthcare
Permission to use this Advanced Service Software and related
documentation (herein called the material) by persons other
than GE Healthcare employees is provided only under an
Advanced Service Package License relating specifically to this
Proprietary Material. This is a different agreement from the one
under which operating and basic service software is licensed. A
license to use operating or basic service software does not
extend to or cover this software or related documentation.
If you are a GE Healthcare employee or a customer who has
entered into such a license agreement with GE Healthcare to
use this proprietary software, you are authorized to use this
Material according to the conditions stated in your license
agreement.
However, you do not have the permission of GE Healthcare to
alter, decompose or reverse-assemble the software, and unless
you are a GE employee, you may not copy the Material. The
Material is protected by Copyright and Trade Secret laws; the
violation of which can result in civil damages and criminal
prosecution.
If you are not party to such a license agreement or a GE
Healthcare Employee, you must exit this Material now.

Trademarks
All products and their name brands are trademarks of their
respective holders.

Copyrights
All Material Copyright © 2015-2023 by
General Electric Company Inc. All Rights Reserved.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-19

5718825-100 English Rev. 15 System view
i-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual
System view 5718825-100 English Rev. 15
 Table of Contents

Translation policy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-3

Damage in transportation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-16
Certified electrical contractor statement - For USA Only - - - - - - - - - - - - i-16
Omission and errors - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-17
Service Safety Considerations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-18
Legal notes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-19
Proprietary to GE Healthcare - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-19
Trademarks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-19
Copyrights - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - i-19
Table of Contents
Chapter 1 — Introduction
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-2
Manual Overview
Contents in this manual - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-3
Typical users of the Proprietary Service Manual - - - - - - - - - - - - - - - - - 1-4
Vivid T8/Vivid T8 Pro models covered by this manual- - - - - - - - - - - - - - 1-5
Method to distinguish R1 from R2- - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-6
Important conventions
Conventions used in book - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-11
Standard hazard icons - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-13
Product icons
Labels locations
Safety considerations
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-18
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-18
Human Safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-18
Mechanical safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-21
Electrical safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-24
Dangerous procedure warnings
Lockout/Tagout (LOTO) requirements
Returning probes and repair parts
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-28
EMC, EMI and ESD
What is EMC? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-30
CE Compliance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-30
Electrostatic discharge (ESD) prevention - - - - - - - - - - - - - - - - - - - - - 1-31
Customer assistance
Contact information- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-32

Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-21

5718825-100 English Rev. 15 System view
 Phone numbers for Customer Assistance - - - - - - - - - - - - - - - - - - - - - 1-33
System manufacturer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-34
Authorized Representative- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-34
Chapter 2 — Site Preparations
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2
General Ultrasound system requirements
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-3
Ultrasound system environmental requirements- - - - - - - - - - - - - - - - - - 2-3
Electrical requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-6
EMI limitations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-9
Probes environmental requirements - - - - - - - - - - - - - - - - - - - - - - - - - 2-11
Time and manpower requirements - - - - - - - - - - - - - - - - - - - - - - - - - - 2-11
Facility needs
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-12
Purchaser responsibilities - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-13
Required facility needs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-14
Desirable features- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-15
Minimal floor plan suggestion- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-16
Recommended floor plan suggestion - - - - - - - - - - - - - - - - - - - - - - - - 2-17
Suggested floor plan, Ultrasound system,
and EchoPAC PC in same room - - - - - - - - - - - - - - - - - - - - - - - - 2-18
Networking setup requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-18
Environmental Dangers
Patient Vicinity UL60601-1 (USA)- - - - - - - - - - - - - - - - - - - - - - - - - - - 2-23
Patient Environment IEC60601-1 and ANSI AAMI ES60601-1 - - - - - - 2-24
Chapter 3 — System Setup
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2
Setup reminders
Average setup time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-3
Setup warnings- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-3
Receiving and unpacking the equipment
Purpose of this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6
Warnings for receiving and unpacking - - - - - - - - - - - - - - - - - - - - - - - - 3-6
The Tilt indicator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7
Receiving the Vivid T8/Vivid T8 Pro - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7
Unpacking the Vivid T8/Vivid T8 Pro- - - - - - - - - - - - - - - - - - - - - - - - - 3-12
Packing the Equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-16
Packing materials - recycling information
Preparing for setup
Verify customer order - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-18
Physical inspection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-18
EMI protection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-18
Completing the setup
Purpose of this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-19

i-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-19
System specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-19
Electrical specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-20
Connections on the I/O Rear Panel - - - - - - - - - - - - - - - - - - - - - - - - - 3-21
Connecting probes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-23
Powering the system- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-23
System Configuration
Purpose of this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-24
Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-24
Vivid T8/Vivid T8 Pro configuration - - - - - - - - - - - - - - - - - - - - - - - - - - 3-24
Peripherals Installation
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-25
Furnished materials - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-26
Peripherals Installation Instructions - - - - - - - - - - - - - - - - - - - - - - - - - 3-28
Connectivity setup
TCP/IP Screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-41
Network setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-43
Setup connection to a DICOM server - - - - - - - - - - - - - - - - - - - - - - - - 3-43
Verify the Connection to a Device- - - - - - - - - - - - - - - - - - - - - - - - - - - 3-52
DICOM SR- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-54
Export configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-56
Create a new dataflow- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-63
Query/Retrieve Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-68
Option Setup
Software Option Installation Procedure - - - - - - - - - - - - - - - - - - - - - - - 3-72
Paperwork after setup
Contents in this Section- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-74
User’s Manual(s) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-74
Product Locator Installation Card - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-75
Chapter 4 — General Procedures and Functional Checks
Overview
Purpose of this chapter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2
Special Equipment required - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2
General procedures
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3
Power ON/Boot Up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-5
Power off - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-8
LCD Monitor position adjustment - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-10
LCD Monitor configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-11
Logging on to Vivid T8/Vivid T8 Pro as “ADM” - - - - - - - - - - - - - - - - - - 4-12
Service Key (Dongle, HASP) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-13
Exit to Windows Desktop from the
Vivid T8/Vivid T8 Pro application software - - - - - - - - - - - - - - - - - 4-14
Removable media - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-16
Archiving and loading presets - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-17
Data Management - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-19

Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-23

5718825-100 English Rev. 15 System view
 Deleting patient information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-19
Backup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-19
Restore the factory defaults - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-19
Installation and Setup Procedure for Peripherals - - - - - - - - - - - - - - - - 4-20
Where are the User Manuals and the Service Manual? - - - - - - - - - - - 4-20
How to display or print the PDF files from the Manual CD? - - - - - - - - - 4-20
Cleaning the Trackball- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-21
Functional checks
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-23
Contents in this Section- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-23
Preparation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-23
Basic Controls - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-24
Operator Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-24
Touch panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-25
Performance Tests - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-25
2D Mode (B mode) Checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-26
2D Mode Screen Example - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-26
Preparations- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-26
Adjust the 2D mode controls - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-26
Image Quality Check (IQC) preset for service - - - - - - - - - - - - - - - - - - 4-27
M Mode Checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-28
M-Mode Screen Example - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-28
Preparations- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-28
Adjust the M Mode controls - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-28
Color Mode Checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-29
Select Color 2D Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-29
Adjust the Color 2D Mode controls - - - - - - - - - - - - - - - - - - - - - - - - - - 4-30
Select Color M Mode- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-31
PW/CW Doppler Mode Checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-33
Adjust the PW/CW Doppler Mode controls - - - - - - - - - - - - - - - - - - - - 4-34
Tissue Velocity Imaging (TVI) Checks- - - - - - - - - - - - - - - - - - - - - - - - 4-35
Adjust the TVI Controls - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-36
Basic Measurements- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-36
Probe/Connectors Check- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-37
ECG Check - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-38
Cineloop Check - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-40
Preparation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-40
Adjust the Cineloop controls - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-40
Back End Processor checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-41
Operator Panel Test - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-41
Peripheral checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-41
Turn OFF Power to Vivid T8/Vivid T8 Pro - - - - - - - - - - - - - - - - - - - - - 4-41
Mechanical Functions Checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-41
Power supply test & adjustments
Power Supply Test Procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-43
Power Supply Adjustment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-43
Application Turnover Check List
Software Configuration Checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-44

i-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Site Log
Chapter 5 — Components and Functions (Theory)
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-2
Block Diagram and Theory
General Information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3
Top Console- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3
Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-4
WMST PWA- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-6
SMIO PWA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-8
SKBD PWA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-11
WPWR PWA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-13
Relay Board - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-16
SUSB PWA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-18
Power Diagram
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-19
AC Power - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-19
Common Service Platform
Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-20
Global Service User Interface (GSUI) - - - - - - - - - - - - - - - - - - - - - - - - 5-21
Service Dongle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-24
Service Home Page - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-33
Error Logs Tab - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-34
Diagnostics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-38
Image Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-39
Calibration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-39
Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-40
Utilities- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-41
Replacement - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-42
PM - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-42
Chapter 6 — Service Adjustments
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2
LCD Monitor adjustments
Purpose of this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-3
Monitor Adjustments - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-3
Chapter 7 — Diagnostics/Troubleshooting
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-2
Gathering Trouble Data
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3
Collect Vital System Information- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3
Collect a Trouble Image with Logs - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-4
Screen Capture
Capturing a screen with P2 Key - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-5
Capturing a Screen with Prt Key (for R2.x.x only)- - - - - - - - - - - - - - - - 7-12

Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-25

5718825-100 English Rev. 15 System view
 System Warning/Error and Logs
Temperature warning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-13
Temperature exceeds threshold - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-13
System voltage failure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-14
Hardware configuration error - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-14
System error - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-15
Global Service User Interface (GSUI)
Enter global service user interface - - - - - - - - - - - - - - - - - - - - - - - - - - 7-16
Control Frame - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-18
Common Diagnostics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-19
Network and Insite II Configuration
Network Configuration- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-33
Insite II Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-39
Troubleshooting
Console Troubleshooting Trees - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-43
Monitor Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-48
Network Troubleshooting Tress - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-49
Rewrite the Serial Number- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-50
Chapter 8 — Replacement Procedures
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-2
Warnings and important information
Warnings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-3
Returning/shipping probes and repair parts - - - - - - - - - - - - - - - - - - - - - 8-4
Disassembly/Re-assembly
Warning and Caution - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-5
Tools needed for servicing Vivid T8/Vivid T8 Pro - - - - - - - - - - - - - - - - - 8-6
Overview of Vivid T8/Vivid T8 Pro - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-7
Part Disassembly List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-12
LCD Assy
LCD Panel Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-14
Keyboard Assy
Touch Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-22
Speaker - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-26
KBD Top Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-29
SUSB PWA-USB Board - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-32
Internal ECG Cable - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-35
ECG Board - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-38
Trackball - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-41
Power and Freeze button with cable kit - - - - - - - - - - - - - - - - - - - - - - 8-43
AN Keyboard - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-46
Main Keyboard PWA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-48
KBD Top Cover - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-51
Rear Handle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-53
Arm Support Kit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-58
Flexible Arm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-61
Flexible Arm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-65

i-26 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 KBD Bottom - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-73
Body Assy
Body Assy Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-75
Body Assy Disassembly List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-76
Body Front Cover - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-77
Body Back Cover - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-78
Body Left Cover - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-80
Body Right Cover - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-82
Body Top Cover - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-84
Body Neck - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-86
Internal Box Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-88
Hardisk Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-93
Internal Battery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-97
ACDC Module - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-100
I/O Board PWA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-103
AP2M PWA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-108
WPWR PWA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-112
CPU Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-119
Battery and SATA Connection PWA - - - - - - - - - - - - - - - - - - - - - - - 8-142
CMOS Battery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-144
Battery Bracket- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-146
Base Assy
Footrest Cover - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-148
Cable Kits
LCD cable kit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-157
Cleaning the Trackball
Manpower - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-174
Tools - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-174
Preparations- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-174
Test the Trackball - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-175
Cleaning the Air Filter
Manpower - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-176
Tools - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-176
Preparations- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-176
Loading the software
Purpose of this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-178
Customer provided prerequisite - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-178
Data Management - moving all images - - - - - - - - - - - - - - - - - - - - - - 8-178
Backing up the Patient Archive and System Configurations - - - - - - - 8-179
Restoring up the Patient Archive and System Configurations - - - - - - 8-179
Recording important settings and parameters - - - - - - - - - - - - - - - - - 8-180
Loading the System Software (for R1.x.x) - - - - - - - - - - - - - - - - - - - - 8-181
Loading the System Software (for R2.x.x) - - - - - - - - - - - - - - - - - - - - 8-185
Software Version check out - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-193
Option Strings Check - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-194
Probe Recognition Check - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-195
Peripheral Device Check - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-195
Reinstall DICOM Devices - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-196

Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-27

5718825-100 English Rev. 15 System view
 Software Reload
Confirm Backups for Patient Data and Presets - - - - - - - - - - - - - - - - 8-197
System Reload procedure (for R1.x.x) - - - - - - - - - - - - - - - - - - - - - - 8-198
System Reload procedure (for R2.x.x) - - - - - - - - - - - - - - - - - - - - - - 8-205
Software Download- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-213
Software download and installation- - - - - - - - - - - - - - - - - - - - - - - - - 8-218
Installation Wizard (for R2.x.x) - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-225
Check after FRU Replacement
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-233
Submitting a Replacement Procedure Report - - - - - - - - - - - - - - - - - 8-233
Functional Test Matrix - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-234
Used Media and Used Parts Disposal
Chapter 9 — Renewal Parts
Overview
Contents in this chapter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-2
List of Abbreviations
Renewal Parts Lists
AC Power Cord - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-4
Operator Console Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-5
LCD Assy- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-7
Keyboard Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-8
Body Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-10
Base Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-12
LCD Assy- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-13
Keyboard Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-14
Body Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-20
Base Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-30
Accessories and Cable Kits - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-31
Probe - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-36
Peripheral - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-38
Manuals- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-41
Chapter 10 — Care and Maintenance
Overview
Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-2
Warnings
Why do maintenance
Periodic maintenance inspections - - - - - - - - - - - - - - - - - - - - - - - - - - 10-4
Keeping records - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-4
Quality assurance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-5
Maintenance task schedule
How often should maintenance tasks be performed? - - - - - - - - - - - - - 10-6
Tools required
Standard GE tool kit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-8
GE-2 tool kit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-10
Special tools, supplies and equipment used for maintenance - - - - - - 10-11
System maintenance
Preliminary checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-12

i-28 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-13
Physical inspection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-15
Inspecting the system - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-16
Cleaning the unit- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-17
Prevention of static electricity interference- - - - - - - - - - - - - - - - - - - - 10-23
Optional Diagnostic Checks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-24
Probe maintenance- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-25
Battery Replacement and Disposition - - - - - - - - - - - - - - - - - - - - - - - 10-27
Electrical safety tests
Safety test overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-28
Leakage current limits - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-30
Outlet test - wiring arrangement - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-32
Grounding continuity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-33
Chassis leakage current test - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-34
Probe leakage current test- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-36
When there's too much leakage current …
AC/DC Fails - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-39
Chassis Fails - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-39
Probe Fails- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-40
Peripheral Fails - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-40
Still Fails - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-40
New Unit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-40
ECG Fails - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-40
Inspection Paperwork
Ultrasound Inspection Forms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-41
Electrical Safety Tests Log
Index

Vivid T8/Vivid T8 Pro – Proprietary Service Manual i-29

5718825-100 English Rev. 15 System view
i-30 Vivid T8/Vivid T8 Pro – Proprietary Service Manual
System view 5718825-100 English Rev. 15
 Chapter 1

Introduction

This chapter describes important issues related to

safely servicing the Ultrasound system. The service
provider must read and understand all the information
presented here before installing or servicing the units.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-1

5718825-100 English Rev. 15 System view
Introduction

1-1 Overview

1-1-1 Contents in this chapter

• 1-1 ‘Overview’ on page 1-2
• 1-2 ‘Manual Overview’ on page 1-3
• 1-3 ‘Important conventions’ on page 1-11
• 1-4 ‘Product icons’ on page 1-15
• 1-5 ‘Labels locations’ on page 1-16
• 1-6 ‘Safety considerations’ on page 1-18
• 1-7 ‘Dangerous procedure warnings’ on page 1-26
• 1-8 ‘Lockout/Tagout (LOTO) requirements’ on page 1-27
• 1-9 ‘Returning probes and repair parts’ on page 1-28
• 1-10 ‘EMC, EMI and ESD’ on page 1-30
• 1-11 ‘Customer assistance’ on page 1-32

1-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Manual Overview

1-2 Manual Overview

This manual provides installation and service information for the

Vivid T8/Vivid T8 Pro Ultrasound system. It is divided in ten
chapters as shown below.

1-2-1 Contents in this manual

The manual is divided into ten chapters.
In the beginning of the manual, before chapter 1, you will find
the Revision overview, the Important precautions including
Translation policy, Damage in transportation, Certified electrical
contractor statement, Omission & errors, Service safety
considerations and Legal notes, and the Table of Contents
(TOC).
An Index has been included after Chapter 10.

Table 1-1: Contents in this manual

Chapter Chapter title Description

number
1. Introduction Contains a content summary and warnings.
2. Site preparations Contains pre-setup requirements for the Vivid
T8/Vivid T8 Pro.
3. System Setup Contains setup procedure with procedure
checklist for the system.
4. General Procedures Contains functional checks that must be
and Functional performed as part of the installation, or as
Checks required during servicing and periodic
maintenance.
5. Components and Contains block diagrams and functional
Functions (Theory) explanations of the electronics.
6. Service Adjustments Contains instructions on how to make any
available adjustments to the Vivid T8/Vivid T8
Pro.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-3

5718825-100 English Rev. 15 System view
Introduction

Table 1-1: Contents in this manual (Continued)

Chapter Chapter title Description

number
7. Diagnostics/ Provides procedures for running diagnostic or
Troubleshooting related routines for the Vivid T8/Vivid T8 Pro.
8. Replacement Provides disassembly procedures and
procedures reassembly procedures for all changeable FRU.
9. Renewal Parts Contains a complete list of replacement parts for
Vivid T8/Vivid T8 Pro.
10. Care & Maintenance Provides periodic maintenance procedures for
Vivid T8/Vivid T8 Pro.
N/A Index A quick way to the topic you’re looking for.

1-2-2 Typical users of the Proprietary Service Manual

• GEHC Service Personnel (setup, maintenance, etc.)
• GEHC Online Center Personnel
• Licensed Hospital’s Service Providers

1-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Manual Overview

1-2-3 Vivid T8/Vivid T8 Pro models covered by this manual

Table 1-2: Vivid T8/Vivid T8 Pro Model Designations

Model Number Description System SW

H48432AA English version Vivid T8 R1.x.x

H48432AB English version Vivid T8 with Articulation Arm R1.x.x

H48702AK Vivid T8 R2 basic console R2.x.x

H48702AP Vivid T8 R2 console with flexible arm R2.x.x

H48432AC Chinese version Vivid T8 R1.x.x

H48432AD Chinese version Vivid T8 with Articulation Arm R1.x.x

H48432AE Korean version Vivid T8 R1.x.x

H48432AF English version Vivid T8 Pro R1.x.x

NOTE: When not otherwise specified, the contents of this manual

applies to all Vivid T8/Vivid T8 Pro models.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-5

5718825-100 English Rev. 15 System view
Introduction

1-2-4 Method to distinguish R1 from R2

Figure 1-1. Method to distinguish R1 and R2

NOTE: Vivid T8 R1 refers to the system which is installed with the

software R1.x.x. Vivid T8 R2 refers to the system which is
installed with the software R2.x.x.
The software of R1 can be upgraded to R2.x.x which is the
same software version as R2. Before software upgrade, the R1
CPU should be replaced with R2 CPU to ensure effective
function of software R2.x.x.
There are some visible methods to distinguish R1 system from
R2 system and distinguish whether the software of R1 system is
the upgraded version.

1-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Manual Overview

1-2-4 Method to distinguish R1 from R2(continued)

First, check Rear panel to see if there is S-Video/Composite out
port.
If No, it is Vivid T8 R2.

Figure 1-2. Real panel

If Yes, there is S-Video/Composite out port, check if the console

has upgrade labeling with UDI.
If No, it is Vivid T8 R1 with software R1.x.x.
If Yes, there is upgrade labeling with UDI, the system is R1
system with software upgraded version of R2.x.x. This is R1
upgraded to R2.

Figure 1-3. R1 Real panel with UDI label

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-7

5718825-100 English Rev. 15 System view
 Introduction

1-2-4 Method to distinguish R1 from R2(continued)

Table 1-3: R1 and R2 Compatibility Matrix

Category R1 Upgraded R2 R2

Software version R1.x.x R2.x.x R2.x.x

UDI Label NO The upgrade UDI label is on The UDI label is on the rating
the back cover. plate

S-Video/ YES YES NO

Composite out
port

CPU model Illustration: Illustration: Illustration:

OR

The part number on CPU is The part number on CPU is The part number on CPU is
5487374. 5717877. 5717877.

OR

1-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Manual Overview

Table 1-3: R1 and R2 Compatibility Matrix

Category R1 Upgraded R2 R2

Internal Box The part number on the label is 5495619-3 For R2.0.2 and below, the part
number on the label is
5495619-4
For R2.0.3 and above, the part
number on the label is
5495619-5

There is one connector in There is one connector in this For R2.0.2 and below, there are
this ___location. ___location. two connectors in this ___location.

The CPU in the box is The CPU in the box is 5717877 For R2.0.3 and above, there
5487374 are three connectors in this
___location.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-9

5718825-100 English Rev. 15 System view
 Introduction

Table 1-3: R1 and R2 Compatibility Matrix

Category R1 Upgraded R2 R2

Battery NO NO For R2.0.3 and above, the

battery is not user-accessible.

For R2.0.3 and above, the

battery is user-accessible.

1-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Important conventions

1-3 Important conventions

1-3-1 Conventions used in book

Important conventions, used in this document, are described
next.

1-3-1-1 Model designations

This manual covers the Vivid T8/Vivid T8 Pro Ultrasound

systems listed in:
1-2-3 ‘Vivid T8/Vivid T8 Pro models covered by this manual’ on
page 1-5.

1-3-1-2 Icons

Pictures, or icons, are used wherever they will reinforce the

printed message. The icons, labels, and conventions used on
the product and in the service information are described in this
chapter.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-11

5718825-100 English Rev. 15 System view
Introduction

1-3-1-3 Safety precaution messages

Various levels of safety precaution messages may be found on

the equipment and in the service information. The different
levels of concern are identified by a flag word that precedes the
precautionary message. Known or potential hazards to
personnel are labeled in one of three ways:
• DANGER
• WARNING
• CAUTION

DANGER Danger is used to indicate the presence of a hazard that will

cause severe personal injury or death if the instructions are
ignored.

WARNING Warning is used to indicate the presence of a hazard that can

cause severe personal injury and property damage if
instructions are ignored.

CAUTION Caution is used to indicate the presence of a hazard that will or

can cause minor personal injury and property damage if
instructions are ignored. Equipment damage possible.

NOTE: Notes are used to provide important information about an item

or a procedure.
NOTE: Be sure to read the notes; the information contained in a note
can often save you time or effort.

1-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Important conventions

1-3-2 Standard hazard icons

Important information will always be preceded by either the
exclamation point (!) contained within a triangle, or the symbols
for “Danger”, “Warning” or “Caution”, as seen throughout this
chapter. In addition to text, several different graphical icons
(symbols) may be used to make you aware of specific types of
hazards that could possibly cause harm. Even if a symbol isn’t
used in this manual, it may be included for your reference.

Table 1-4: Standard hazard icons

ELECTRICAL

MECHANICAL

RADIATION

LASER

HEAT

PINCH

NOTE: Even if a symbol isn’t used on the product or in this manual, it

may be included for your reference.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-13

5718825-100 English Rev. 15 System view
Introduction

1-3-2-1 Standard Icons that indicate that a special procedure is to be used

Some others icons make you aware of specific procedures that

should be followed.

Table 1-5: Standard Icons that indicates that a special procedure is to be used

Avoid Static Electricity Tag and Lock Out Wear Eye Protection

Hand Protection Foot Protection Wear Eye Protection

Be sure to read the notes; the information contained in a note

can often save you time or effort.

1-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Product icons

1-4 Product icons

It is important to refer to the current revision of the Ultrasound

system’s User Manual for a full list of product labels prior to
servicing the system.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-15

5718825-100 English Rev. 15 System view
Introduction

1-5 Labels locations

It is important to refer to the current revision of the Ultrasound

system’s User Manual for a full list of product labels prior to
servicing the system.
Vivid T8/Vivid T8 Pro labels are provided in English.
The labels are at the back of the system. The label content may
be different for different regions. Please refer to the labels on the
system for the actual content.

Figure 1-4. Vivid T8 R2.x.x Rating Plate Location

NOTE: UDI label is for R2.x.x only.

1-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Labels locations

Table 1-6: Label Icons

Label/Icon Purpose/Meaning Location

Every system has a unique Rating plate

marking for identification, the
Unique Device Identification
(UDI) Label. The UDI label
consists of a series of
alpha-numeric characters and
barcode which uniquely identify Back Cover
the Vivid T8/Vivid T8 Pro system
as a medical device
manufactured by General
Electric. Scan or enter the UDI
information into the patient health
record as required by
country-specific laws.

Serial Number. Rating plate

NOTE: If the new label is needed during the service activities, please
click “Ask an Expert“ to submit the case in the support central:
http://supportcentral.ge.com/products/sup_products.asp?prod_
id=44177.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-17

5718825-100 English Rev. 15 System view
Introduction

1-6 Safety considerations

1-6-1 Contents in this section

• 1-6-2 ‘Introduction’ on page 1-18
• 1-6-3 ‘Human Safety’ on page 1-18
• 1-6-4 ‘Mechanical safety’ on page 1-21
• 1-6-5 ‘Electrical safety’ on page 1-24

1-6-2 Introduction
The following safety precautions must be observed during all
phases of operation, service and repair of this equipment.
Failure to comply with these precautions or with specific
warnings elsewhere in this manual, violates safety standards of
design, manufacture and intended use of the equipment.

1-6-3 Human Safety

• Operating personnel must not remove the system covers.
• Servicing should be performed by authorized personnel
only.
Only personnel who have participated in a Vivid T8/Vivid T8 Pro
Training Seminar are authorized to service the equipment.

DANGER DANGEROUS VOLTAGES, CAPABLE OF CAUSING

DEATH, ARE PRESENT IN THIS EQUIPMENT. USE
EXTREME CAUTION WHEN HANDLING, TESTING
AND ADJUSTING.

WARNING If the covers are removed from an operating Vivid T8/Vivid T8

Pro, some metal surfaces may be warm enough to pose a
potential heat hazard if touched, even while in shutdown mode.

1-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Safety considerations

1-6-3 Human Safety(continued)

WARNING Because of the limited access to cabinets and equipment in the

field, placing people in awkward positions, GE has limited the
lifting weight for one person in the field to 16 KG (35 LBS).
Anything over 16 KG (35 LBS) requires 2 people.

WARNING Have two people available to deliver and unpack the Vivid T8/
Vivid T8 Pro.
Attempts to move the Ultrasound system considerable
distances or on an incline by one person could result in injury
or damage or both.

WARNING Explosion Warning

DO NOT operate the equipment in an explosive atmosphere.
Operation of any electrical equipment in such an environment
constitutes a definite safety hazard.

WARNING DO NOT substitute parts or modify equipment

Because of the danger of introducing additional hazards, ONLY
install GE approved parts. DO NOT perform any unauthorized
modification of the equipment.

WARNING Ensure that the Ultrasound system is turned off and unplugged
Wait for at least 20 seconds for capacitors to discharge as
there are no test points to verify isolation. The amber light on
the OP panel ON/OFF button will turn off.
Ultrasound system components may be energized. Always
refer to the Ultrasound system's Proprietary Service Manual for
LOTO warnings and cautions

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-19

5718825-100 English Rev. 15 System view
Introduction

1-6-3 Human Safety(continued)

WARNING Risk of electrical shock, Ultrasound system must be turned off

and disconnected from power source. Cord must be controlled
at all times.
Wait for at least 20 seconds for capacitors to discharge as
there are no test points to verify isolation. The amber light on
the OP panel on/off button will turn off.
Ultrasound System components may be energized. Always
refer to the Ultrasound system's Proprietary Service Manual for
LOTO warnings and cautions

WARNING Use all Personal Protection Equipment (PPE) such as gloves,

safety shoes, safety glasses, and kneeling pad, to reduce the
risk of injury.

WARNING Beware of possible sharp edges on all mechanical parts. If

sharp edges are encountered, the appropriate PPE should be
used to reduce the risk of injury.

WARNING Wear all PPE including gloves as indicated in the chemical

MSDS.

1-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Safety considerations

1-6-4 Mechanical safety

WARNING While the software install procedure is designed to preserve

data, you should save any patient data, images, system setups
to removable media or hardcopy before doing a software
upgrade.

WARNING Ultrasound probes are highly sensitive medical instruments

that can easily be damaged by improper handling. Use care
when handling and protect from damage when not in use. Do
NOT use a damaged or defective probe. Failure to follow these
precautions can result in serious injury and equipment
damage.

WARNING Never use a probe that has fallen to the floor. Even if it looks
OK, it may be damaged.

WARNING When the Ultrasound system is raised for a repair or moved

along any incline, use extreme caution since it may become
unstable and tip over.

CAUTION Take extra care when moving the system.

The Vivid T8/Vivid T8 Pro weighs approximately 65 kg (144 lbs)
or more, depending on installed peripherals, when ready for
use. To avoid possible injury and equipment damage when
transporting from one area of use to another:
• Be sure the pathway is clear.
• Limit movement to a slow careful walk.
• Use two or more persons to move the equipment on
inclines or long distance.

CAUTION Before you move or transport the Ultrasound system, make

sure to lock the LCD monitor arm firmly and flip down the
monitor to prevent damage to the Ultrasound system.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-21

5718825-100 English Rev. 15 System view
Introduction

1-6-4 Mechanical safety(continued)

CAUTION To avoid injury when you move the LCD monitor and the
monitor arm, do not put your finger, hand, or object on the joint
of the monitor or the monitor arm.

CAUTION Ensure that nobody touches the console arm when moving the
operator panel.

CAUTION Do not move the Ultrasound system if the Operator Panel is in

unlocked position.

CAUTION Do not transport Vivid T8/Vivid T8 Pro in a vehicle without

locking the casters (wheels) and securing it as described in
chapter 4.

CAUTION Use protective glasses during drilling, filing smooth surfaces,

and during all other work where eyes need protection.

CAUTION Use safety shoes when doing work where there is any chance
of foot injury.

1-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Safety considerations

1-6-4 Mechanical safety(continued)

CAUTION Use protective gloves when working with sharp edges or when
directed to wear PPE during a removal/replacement procedure.

CAUTION Be careful not to pinch any of the cables.

NOTE: Special care should be taken when transporting the Ultrasound

system in a vehicle:
• Before transporting, place the system in its special storage
case.
• Lock the wheels (brake)
• Ensure that the system is firmly secured while inside the
vehicle.
• Secure system with straps or as directed otherwise to
prevent motion during transport.
• Prevent vibration damage by driving cautiously. Avoid
unpaved roads, excessive speeds, and erratic stops or
starts.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-23

5718825-100 English Rev. 15 System view
Introduction

1-6-5 Electrical safety

1-6-5-1 Safe practices

Follow these guidelines to minimize shock hazards whenever

you are using the Ultrasound system:
• To minimize shock hazard, the equipment chassis must be
connected to an electrical ground.
• The Ultrasound system is equipped with a three-conductor
AC power cable. This must be plugged into an approved
electrical outlet with safety ground.
• The power outlet used for this equipment should not be
shared with other types of equipment.
• Both the system power cable and the power connector must
meet international electrical standards

WARNING Connecting a Vivid T8/Vivid T8 Pro to the wrong voltage level

will most likely destroy it.

1-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Safety considerations

1-6-5-2 Probes

Follow these guidelines before connecting a probe to the

Ultrasound system:
• Inspect the probe prior to each use for damage or
degradation to the:
• housing
• cable strain relief
• lens
• seal
• connector pins
• locking mechanism
• Do not use a damaged or defective probe.
• Never immerse the probe connector or adapter into any
liquid.
• The system has more than one type of probe port. Use the
appropriate probe port designed for the probe you are
connecting.

1-6-5-3 Peripherals

Refer to the Patient Safety Environment section of the User’s

Manual for peripheral isolation information.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-25

5718825-100 English Rev. 15 System view
Introduction

1-7 Dangerous procedure warnings

Warnings, such as the example below, precede potentially

dangerous procedures throughout this manual. Instructions
contained in the warnings must be followed.

DANGER DANGEROUS VOLTAGES, CAPABLE OF CAUSING

DEATH, ARE PRESENT IN THIS EQUIPMENT. USE
EXTREME CAUTION WHEN HANDLING, TESTING
AND ADJUSTING.

WARNING If the covers are removed from an operating Vivid T8/Vivid T8

Pro, some metal surfaces may be warm enough to pose a
potential heat hazard if touched, even while in shutdown mode.

WARNING Explosion Warning

DO NOT operate the equipment in an explosive atmosphere.
Operation of any electrical equipment in such an environment
constitutes a definite safety hazard.

WARNING DO NOT substitute parts or modify equipment

Because of the danger of introducing additional hazards, ONLY
install GE approved parts. DO NOT perform any unauthorized
modification of the equipment.

WARNING SHUT DOWN FORCEDLY OR PLUG IN/OUT ACDC

INVALID MAY CAUSE THE DAMAGE OF SYSTEM
FILES.

1-26 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Lockout/Tagout (LOTO) requirements

1-8 Lockout/Tagout (LOTO)

requirements

Follow Lockout/Tagout requirements by ensuring you are in total

control of the AC power plug at all times during the service
process.
To apply Lockout/Tagout (LOTO):
1. Plan and prepare for shutdown.
2. Shutdown the equipment.
3. Isolate the equipment.
4. Remove/disconnect the battery, if present.
5. Apply Lockout/Tagout Devices.
6. Control all stored and residual energy.
7. Verify isolation.
All potentially hazardous stored or residual energy is relieved.

WARNING Energy Control and Power Lockout for Vivid T8/Vivid T8 Pro.
When servicing parts of the Ultrasound system where there is
exposure to voltage greater than 30 volts:
1. Follow LOCK OUT/TAG OUT procedures.
2. Turn off the breaker.
3. Unplug the Ultrasound system.
4. Maintain control of the Ultrasound system power plug.
5. Wait for at least 30 seconds for capacitors to discharge as
there are no test points to verify isolation.
6. Remove/disconnect the battery, if present.
Ultrasound System components may be energized.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-27

5718825-100 English Rev. 15 System view
Introduction

1-9 Returning probes and repair

parts

1-9-1 Overview
Equipment being returned must be clean and free of blood and
other infectious substances. GE Healthcare policy states that
body fluids must be properly removed from any part or
equipment prior to shipment. GE Healthcare employees, as well
as customers, are responsible for ensuring that parts/equipment
have been properly decontaminated prior to shipment. Under no
circumstance should a part or equipment with visible body fluids
be taken or shipped from a clinic or site (for example, body coils
or an ultrasound probe).
The purpose of the regulation is to protect employees in the
transportation industry, as well as the people who will receive or
open this package.
NOTE: The US Department of Transportation (DOT) has ruled that
“items that were saturated and/or dripping with human blood
that are now caked with dried blood; or which were used or
intended for use in patient care” are “regulated medical waste”
for transportation purposes and must be transported as a
hazardous material.

1-28 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Returning probes and repair parts

1-9-1 Overview(continued)
NOTE: The USER/SERVICE staff should dispose of all the waste
properly, per federal, state, and local waste disposal regulations.
The Ultrasound system is not meant to be used for long-term
storage of patient data or images. The user is responsible for the
data on the system and a regular backup is highly
recommended.
If the system is sent for repair, please ensure that any patient
information is backed up and erased from the system before
shipping. It is always possible during system failure and repair to
lose patient data. GE is not responsible for the loss of this data.
If PHI (Patient Healthcare Information) data needs to be sent to
GE employees for service purposes, GE will ascertain
agreement from the customer. Patient information shall only be
transferred by approved service processes, tools and devices
restricting access, protecting or encrypting data where required,
and providing traceability in the form of paper or electronic
documents at each stage of the procedure while maintaining
compliance with cross-border restrictions of patient information
transfers.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-29

5718825-100 English Rev. 15 System view
Introduction

1-10 EMC, EMI and ESD

1-10-1 What is EMC?

Electromagnetic compatibility describes a level of performance
of a device within its electromagnetic environment. This
environment consists of the device itself and its surroundings
including other equipment, power sources and persons with
which the device must interface. Inadequate compatibility results
when a susceptible device fails to perform as intended due
interference from its environment or when the device produces
unacceptable levels of emission to its environment. This
interference is often referred to as radio–frequency or
electromagnetic interference (RFI/EMI) and can be radiated
through space or conducted over interconnecting power of
signal cables. In addition to electromagnetic energy, EMC also
includes possible effects from electrical fields, magnetic fields,
electrostatic discharge and disturbances in the electrical power
supply.

1-10-2 CE Compliance
Vivid T8/Vivid T8 Pro conforms to all applicable conducted and
radiated emission limits and to immunity from electrostatic
discharge, radiated and conducted RF fields, magnetic fields
and power line transient requirements.
For applicable standards, refer to the Safety Chapter of the
Ultrasound system User’s Manual.
NOTE: For CE Compliance, it is critical that all covers, screws,
shielding, gaskets, mesh, clamps, are in good condition,
installed tightly without skew or stress. Proper installation
following all comments noted in this service manual is required
in order to achieve full EMC performance.

1-30 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 EMC, EMI and ESD

1-10-3 Electrostatic discharge (ESD) prevention

WARNING DO NOT touch any boards with integrated circuits prior to

taking the necessary ESD precautions.
Always connect yourself, via an arm-wrist strap, to the advised
ESD connection point located on the rear of the Ultrasound
system (near the power connector).
Follow general guidelines for handling of electrostatic sensitive
equipment.

WARNING Risk of electrical shock, Ultrasound system must be turned off.

Avoid all contact with electrical contacts, conductors and
components. Always use non-conductive handles designed for
the removal and replacement of ESD sensitive parts. All parts
that have the potential for storing energy must be discharged or
isolated before making contact.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-31

5718825-100 English Rev. 15 System view
Introduction

1-11 Customer assistance

1-11-1 Contact information

If this equipment does not work as indicated in this service
manual or in the user manual, or if you require additional
assistance, please contact the local distributor or appropriate
support resource, as listed below.
Before you call, identify the following information, and acquire
image (Alt+D) to send to the Customer Care team:
1. System ID serial number.
2. Software version.
3. Date and time of occurrence.
4. Sequence of events leading to issue.
5. Is the issue repeatable?
6. Imaging mode, probe, preset/application.
7. Media brand, speed, capacity, type.
8. Save secondary image capture, cine loop.
NOTE: Restart the application before resuming clinical scanning.

1-32 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Customer assistance

1-11-2 Phone numbers for Customer Assistance

Table 1-7: Phone numbers for Customer Assistance

LOCATION PHONE NUMBER

USA Service: On-site 1-800-437-1171

GE Healthcare - GE Medical Systems
Ultrasound Service Engineering Service Parts 1-800-558-2040
9900 Innovation Drive
Application Support 1-800-682-5327 or
Wauwatosa, WI 53226
1-262-524-5698

Canada Phone: 1-800-668-0732

LATAM Brazil Phone 3004-2525 (Capitais e

Regiões
metropolitanas)
08000 165 799
(Demais localidades)

Mexico Phone 8002000111

Colombia Phone 01 8000 181350

Puerto Rico Phone 1-855-964-0639

Argentina Phone 0800-222-4342

Peru Phone 0800-5-4342

Chile Phone 1888-0020-4342

800204302

Europe (OLC-EMEA) OLC - EMEA

GE Ultraschall Deutschland Gmbh & Co. KG Phone: +49 (0) 212 2802 - 652
Beethovenstraße 239 +33 1 3083 1300
Postfach 11 05 60, D-42655 Solingen
Germany Fax: +49 (0) 2122-8024-31

Online Services Ultrasound Asia Phone:

• Australia +(61) 1-800-647-855
• China +(86) 800-810-8188
• India +(91) 1800-425-8025
• Japan +(81) 42-648-2940
• Korea +(82) 2620 13585
• Singapore +(95) 6277-3444

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 1-33

5718825-100 English Rev. 15 System view
Introduction

1-11-3 System manufacturer

Table 1-8: System manufacturer

MANUFACTURER PHONE NUMBER FAX NUMBER

GE Medical Systems (China) Co., Ltd. +86 510 85225888 +86 510 85226688
No.19 Changjiang Road
Wuxi National Hi-Tech Dev. Zone
214028 Jiangsu China

1-11-4 Authorized Representative

Table 1-9: Authorized Representative

TELEPHONE / FAX
AUTHORIZED REPRESENTATIVE NUMBER

The ___location of the CE marking is shown in the Safety chapter of the User
manual.

Authorized EU Representative:
GE Medical Systems SCS
283 rue de la Minière 78530 BUC, France

1-34 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Chapter 2

Site Preparations

This chapter provides the information required to plan

and prepare for the setup of an Ultrasound system.
Included are descriptions of the facility and electrical
needs to be met by the purchaser of the units.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-1

5718825-100 English Rev. 15 System view
Site Preparations

2-1 Overview

2-1-1 Contents in this chapter

• 2-1‘Overview’ on page 2-2
• 2-2‘General Ultrasound system requirements’ on page 2-3
• 2-3‘Facility needs’ on page 2-12
• 2-4‘Environmental Dangers’ on page 2-23

2-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General Ultrasound system requirements

2-2 General Ultrasound system

requirements

2-2-1 Contents in this section

• 2-2-2‘Ultrasound system environmental requirements’ on
page 2-3
• 2-2-3‘Electrical requirements’ on page 2-6
• 2-2-4‘EMI limitations’ on page 2-9
• 2-2-5‘Probes environmental requirements’ on page 2-11
• 2-2-6‘Time and manpower requirements’ on page 2-11

2-2-2 Ultrasound system environmental requirements

2-2-2-1 If the Ultrasound system is very cold or hot

When unpacking the Ultrasound system, allow the temperature

of the Ultrasound system to stabilize before powering up. The
following table describes guidelines for reaching operational
temperatures from storage or transport temperatures.

CAUTION If the Ultrasound system is very cold or hot, do not turn on its
power until it has had a chance to acclimate to its operating
environment.

Table 2-1: System Acclimation Time Chart

Degree C -4.5 -2 0.5 3 40 42.5 45 47.5 50 55 60

Degree F 23.9 28.4 32.9 37.4 104 108.5 113 117.5 122 131 140

hours 3 2 1 0 0 1 2 3 4 6 8

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-3

5718825-100 English Rev. 15 System view
Site Preparations

2-2-2-2 Environmental specifications for Ultrasound system

The system should be operated, stored, or transported within

the parameters outlined below. Either its operational
environment must be constantly maintained or the unit must be
turned off.

Table 2-2: System Environmental Requirements

Operational Storage Transport (<16hrs.)

Temperature 3° - 40°C -5° - 50°C -5° - 50°C

38° - 104°F 23° - 122°F 23° - 122°F

Humidity 30 - 80% 10 - 90% 10 - 90%

non-condensing non-condensing non-condensing

Pressure 700 - 1060hPa 700 - 1060hPa 700 - 1060hPa

CAUTION Ensure that the probe face temperature does not exceed the
normal operation temperature range.

CAUTION The Vivid T8/Vivid T8 Pro system and probe connector is not
waterproof. Do not expose the device to water or any kind of
liquid.

2-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General Ultrasound system requirements

2-2-2-3 Cooling

The cooling requirement for a console Ultrasound system with

monitor and on board peripherals, is up to 3800 BTU/h. This
figure does not include cooling needed for lights, people, or
other equipment in the room.
NOTE: Each person in the room places an additional 300 BTU/h
demand on the cooling system.

2-2-2-4 Lighting

Bright light is needed for Ultrasound system installation, updates

and repairs. However, operator and patient comfort may be
optimized if the room light is subdued and indirect. Therefore a
combination lighting system (dim/bright) is recommended. Keep
in mind that lighting controls and dimmers can be a source of
EMI which could degrade image quality. These controls should
be selected to minimize possible interference.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-5

5718825-100 English Rev. 15 System view
Site Preparations

2-2-3 Electrical requirements

2-2-3-1 General requirements

NOTE: GE Healthcare requires a dedicated power and ground for the

proper operation of its Ultrasound equipment. This dedicated
power shall originate at the last distribution panel before the
Ultrasound system.
Sites with a mains power system with defined Neutral and Live:
The dedicated line shall consist of one phase, a neutral (not
shared with any other circuit), and a full size ground wire from
the distribution panel to the Ultrasound outlet.
Sites with a mains power system without a defined Neutral:
The dedicated line shall consist of one phase (two lines), not
shared with any other circuit, and a full size ground wire from the
distribution panel to the Ultrasound outlet.
NOTE: Please note that image artifacts can occur, if at any time within
the facility, the ground from the main facility's incoming power
source to the Ultrasound system is only a conduit.

2-2-3-2 Electrical requirements for the Ultrasound system

In the table below, the electrical specifications for the Ultrasound

system includes monitor and on board peripherals.

Table 2-3: Electrical Specifications for Vivid T8/Vivid T8 Pro system

Voltage Tolerance Power Consumption Frequency

100-240 VAC ±10% Max. 400VA 50/ 60HZ

2-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General Ultrasound system requirements

2-2-3-3 Site circuit breaker

CAUTION Power outage may occur. The Vivid T8/Vivid T8 Pro requires a
dedicated single branch circuit. To avoid circuit overload and
possible loss of critical care equipment, make sure you do not
have any other equipment operating on the same circuit.

It is recommended that the branch circuit breaker for the

Ultrasound system be readily accessible.

CAUTION POWER OUTAGE MAY OCCURE.

The Vivid T8/Vivid T8 Pro requires a dedicated single branch
circuit. To avoid circuit overload and possible loss of critical
care equipment, make sure you DO NOT have any other
equipment operating on the same circuit.

2-2-3-4 Site power outlets

A dedicated AC power outlet must be within reach of the

Ultrasound system without extension cords. Other outlets
adequate for the external peripherals, medical and test
equipment needed to support this Ultrasound system must also
be present within 1 m (3.2 ft.) of the Ultrasound system.
Electrical installation must meet all current local, state, and
national electrical codes.

2-2-3-5 Unit power plug

If the Ultrasound system arrives without a power plug, or with

the wrong plug, you must contact your GE dealer or the
installation engineer must supply what is locally required.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-7

5718825-100 English Rev. 15 System view
Site Preparations

2-2-3-6 Power stability requirement

Table 2-4: Power stability requirement

IEC 61000-4-11 < 5%T (> 95% dip) for < 5%T (> 95% dip) for Mains power
0.5 cycle; 0.5 cycle; quality should be
Voltage dips, short
interruptions and 40%T (60% dip) for 5 40%T (60% dip) for 5 that of a typical
voltage variations cycles; cycles; commercial or
on mains supply hospital
70%T (30 dip) for 25 70%T (30 dip) for 25
cycles; cycles;
environment.

< 5%T (>95% dip) for 5 < 5%T (>95% dip) for 5
sec sec

2-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General Ultrasound system requirements

2-2-4 EMI limitations

Ultrasound systems are susceptible to Electromagnetic
Interference (EMI) from radio frequencies, magnetic fields, and
transients in the air or wiring. They also generate EMI. The
Ultrasound system complies with limits as stated on the EMC
label. However there is no guarantee that interference will not
occur in a particular installation.
Possible EMI sources should be identified before the Ultrasound
system is installed.
Electrical and electronic equipment may produce EMI
unintentionally as the result of a defect. Some of these sources
include:
• medical lasers
• scanners
• cauterizing guns
• computers
• monitors
• fans
• gel warmers
• microwave ovens
• light dimmers
• mobile phones
• in-house wireless phones (DECT phones)
• wireless computer keyboard and mouse
• air conditioning system
• High Frequency (HF) surgery equipment
• general AC/DC adapters
The presence of a broadcast station or broadcast van may also
cause interference.
See: 2-2-4-1‘EMI prevention/abatement’ on page 2-10 for EMI
prevention tips.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-9

5718825-100 English Rev. 15 System view
Site Preparations

2-2-4-1 EMI prevention/abatement

Table 2-5: EMI prevention/abatement

EMI RULE DETAILS

Be aware of Radio • Keep the Ultrasound system at least 5 meters (15 feet) away from other EMI
Frequency sources sources.
• Special shielding may be required to eliminate interference problems caused by
high frequency, high powered radio or video broadcast signals.

Ground the Poor grounding is the most likely reason an Ultrasound system will have noisy
Ultrasound system images. Check grounding of the power cord and power outlet.

Replace all screws, • After you finish repairing or updating the Ultrasound system, replace all covers
Radio Frequency and tighten all screws.
gaskets, covers, • Any cable with an external connection requires a magnet wrap at each end.
cores • Install all covers. Loose or missing covers or Radio Frequency gaskets allow
radio frequencies to interfere with the ultrasound signals.

Replace broken If more than 20% or a pair of the fingers on an Radio Frequency gasket are
Radio Frequency broken, replace the gasket. Do not turn on the Ultrasound system until any loose
gaskets metallic part is removed.

Do not place labels Where applicable, never place a label where Radio Frequency gaskets meet the
where Radio Ultrasound system. Otherwise, the gap created will permit Radio Frequency
Frequency gaskets leakage. Or, if a label has been found in such a position, move the label.
touch metal

Use GE specified The interconnect cables are grounded and require ferrite beads and other
harnesses and shielding. Also, cable length, material, and routing are all important; do not change
peripherals from what is specified.

Take care with Cellular phones may transmit a 5 V/m signal; that could cause image artifacts.
cellular phones

Properly route Where applicable, do not allow cables to lie across the top of the Card Rack or
peripheral cables hang out of the peripheral bays. Loop the excess length for peripheral cables
inside the peripheral bays. Attach the monitor cables to the frame.

2-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General Ultrasound system requirements

2-2-5 Probes environmental requirements

2-2-5-1 Operation, storage and transport temperatures for probes

Probes should be operated, stored, or transported within the

parameters outlined below.

CAUTION Ensure that the probe face temperature does not exceed the
normal operation temperature range.

Table 2-6: Probe Environmental Requirements

Operational Storage Transport

Temperature 3° - 40° C -5° - 50° C -5° - 50° C

38° - 104° F 23° - 122° F 23° - 122° F

Humidity 30- 80% 10 - 90% 10 - 90%

non-condensing non-condensing non-condensing

Pressure 700 - 1060hPa 700 - 1060hPa 700 - 1060hPa

CAUTION Check the room temperature before you use the probe.

CAUTION Ensure that the probe face temperature does not exceed the
normal operation temperature range.

NOTE: Refer to Table 2-1 on page 2-3 to determine the needed

settlement time.

2-2-6 Time and manpower requirements

Site preparation takes time. Begin site preparation checks as
soon as possible, if possible, six weeks before delivery, to allow
enough time to make any changes.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-11

5718825-100 English Rev. 15 System view
Site Preparations

2-3 Facility needs

2-3-1 Contents in this section

• 2-3-2‘Purchaser responsibilities’ on page 2-13
• 2-3-3‘Required facility needs’ on page 2-14
• 2-3-4‘Desirable features’ on page 2-15
• 2-3-5‘Minimal floor plan suggestion’ on page 2-16
• 2-3-6‘Recommended floor plan suggestion’ on page 2-17
• 2-3-7‘Suggested floor plan, Ultrasound system, and
EchoPAC PC in same room’ on page 2-18
• 2-3-8‘Networking setup requirements’ on page 2-18

2-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Facility needs

2-3-2 Purchaser responsibilities

The work and materials needed to prepare the site is the
responsibility of the purchaser. Delay, confusion, and waste of
manpower can be avoided by completing pre-installation work
before delivery. Purchaser responsibility includes:
• Procuring the materials required
• Completing the preparations before delivery of the
Ultrasound system
• Paying the costs for any alterations and modifications not
specifically provided in the sales contract
NOTE: All electrical installations that are preliminary to the positioning
of the equipment at the site prepared for the equipment must be
performed by licensed electrical contractors. Other connections
between pieces of electrical equipment, calibrations, and testing
must also be performed by qualified personnel. The products
involved (and the accompanying electrical installations) are
highly sophisticated and special engineering competence is
required. All electrical work on these products must comply with
the requirements of applicable electrical codes. The purchaser
of GE equipment must only utilize qualified personnel to perform
electrical servicing on the equipment.
The desire to use a non–listed or customer provided product or
to place an approved product further from the Ultrasound
system than the interface kit allows, presents challenges to the
installation team. To avoid delays during installation, such
variances should be made known to the individuals or group
performing the installation at the earliest possible date
(preferably prior to the purchase).
The ultrasound suite must be clean prior to delivery of the
Ultrasound system. Carpet is not recommended because it
collects dust and creates static. Potential sources of EMI
(electromagnetic interference) should also be investigated
before delivery. Dirt, static, and EMI can negatively impact
Ultrasound system reliability.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-13

5718825-100 English Rev. 15 System view
Site Preparations

2-3-3 Required facility needs

NOTE: GE Healthcare requires a dedicated power and ground for the
proper operation of its Ultrasound equipment. This dedicated
power shall originate at the last distribution panel before the
Ultrasound system.
Sites with a mains power system with defined Neutral and Live:
The dedicated line shall consist of one phase, a neutral (not
shared with any other circuit), and a full size ground wire from
the distribution panel to the Ultrasound outlet.
Sites with a mains power system without a defined Neutral:
The dedicated line shall consist of one phase (two lines), not
shared with any other circuit, and a full size ground wire from the
distribution panel to the Ultrasound outlet.

2-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Facility needs

2-3-3 Required facility needs(continued)

NOTE: Please note that image artifacts can occur, if at any time within
the facility, the ground from the main facility's incoming power
source to the Ultrasound unit is only a conduit.
• Dedicated single branch power outlet of adequate
amperage meeting all local and national codes which is
located less than 2.5 m (8 ft.) from the unit’s proposed
___location
• Door opening is at least 76 cm (30 in) wide
• Proposed ___location for unit is at least 0.5m (1.5 ft.) from the
wall for cooling
• Power outlet and place for any external peripheral are within
2 m (6.5 ft.) of each other with peripheral within 1 m of the
unit to connect cables.
• Power outlets for other medical equipment.
• Power outlets for test equipment within 1 m (3.2 ft.) of
Ultrasound system.
• Clean and protected space to store probes (in their cases or
on a rack)
• Material to safely clean probes (done with a plastic
container, never metal)
For the amperage requirements, see: 2-2-3‘Electrical
requirements’ on page 2-6.

2-3-4 Desirable features

• Door is at least 92 cm (3 ft.) wide
• Circuit breaker for dedicated power outlet is easily
accessible
• Sink with hot and cold water
• Receptacle for bio–hazardous waste, like used probe
sheaths
• Emergency oxygen supply
• Storage for linens and equipment
• Nearby waiting room, lavatory, and dressing room
• Dual level lighting (bright and dim)
• Lockable cabinet ordered by GE for its software and
proprietary manuals

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-15

5718825-100 English Rev. 15 System view
Site Preparations

2-3-5 Minimal floor plan suggestion

CSI 8x10
Scale:
Each square equals one square
4 5 foot (app. 31 x 31 cm)
2 3

11
10
9

8 12
13
7

6 14
1

1. Door – at least 762 mm (30 6. Examination Table – 1930 x 12. Network Interface
inches) 610 mm (76 x 24 inches) 13. 457 mm (18 inches) distance
2. Film Viewer 7. Footswitch of Ultrasound system from
3. Counter Top, Sink with hot 8. Stool wall or objects
and cold water and Supplies 9. Ultrasound system 14. GE Cabinet for Software and
Storage 10. External Peripherals Manuals
4. Linen Supply 11. Dedicated Power Outlet -
5. Probes/Supplies Circuit Breaker protected and
easily accessible

Figure 2-1. Minimal floor plan, 2.5 m x 3 m (8 by 10 foot)

2-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Facility needs

2-3-6 Recommended floor plan suggestion

CSI 14x17

10 11 15
12

13 14 16
2 3 4 5

7
1

17

18

Scale: Each square equals one square foot (app. 31 x 31 cm)

1. Secretaries or Doctors Desk 8. Suction Line 14. Footswitch

2. File Cabinet 9. Ultrasound system 15. Storage for Linens and
3. Film Viewer 10. Dedicated Power Outlet - Equipment
4. Counter Top Circuit Breaker protected and 16. Examination Table – 1930 x
5. Counter Top and Sink with easily accessible 610 mm (76 x 24 inches)
hot and cold water 11. Network Interface 17. Lavatory and Dressing Room
6. Overhead Lights Dimmer - 12. 457 mm (18 inches) distance 18. Door – at least 762 mm (30
Dual Level Lighting (bright of Ultrasound system from inches)
and dim) wall or objects
7. Emergency Oxygen 13. Stool

Figure 2-2. A 14 by 17 foot recommended floor plan

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-17

5718825-100 English Rev. 15 System view
Site Preparations

2-3-7 Suggested floor plan, Ultrasound system, and EchoPAC PC in

same room

1. EchoPAC PC workstation 4. 3x mains power outlets 7. Ethernet network wall outlet

parts 5. Hot and Cold water
2. UPS 6. Dedicated mains power out-
3. Ethernet network wall outlet let

Figure 2-3. Suggested Room with EchoPAC PC workstation and Ultrasound Scanner

2-3-8 Networking setup requirements

2-3-8-1 Stand alone Ultrasound system (without network connection)

None.

2-3-8-2 Scanner connected to hospital’s network

Supported networks:
10/100 Mbps Ethernet/DICOM network (option)

2-3-8-3 InSite requirements

InSite requires an Ethernet connection via:

• 10/100 Mbps Interface

2-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Facility needs

2-3-8-4 Purpose of the DICOM network function

DICOM services provide the operator with clinically useful

features for moving images and patient information over a
hospital network.
Examples of DICOM services include the transfer of images to
workstations for viewing or transferring images to remote
printers.
As an added benefit, transferring images in this manner frees up
the on-board monitor and peripherals, enabling viewing to be
done while scanning continues.
With DICOM, images can be archived, stored, and retrieved
faster, easier, and at a lower cost.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-19

5718825-100 English Rev. 15 System view
Site Preparations

2-3-8-5 DICOM option setup requirements

To configure the Ultrasound system to work with other network

connections, the site’s network administrator must provide
information to complete the form “Worksheet for DICOM
Network Information”. Ensure that there are no spaces in any
field of the form.
See:
Entries must include:
• A host name, local port number, AE Title, IP address and
Net Mask for the Ultrasound system.
• The IP addresses for the default gateway and other routers
at the site for ROUTING INFORMATION.
• The host name, IP address, port and AE Title for each
device the site wants connected to the Ultrasound system
for DICOM APPLICATION INFORMATION. A field for the
make (manufacturer) and the revision of the device, is also
included. This information may be useful for error solving.

2-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Facility needs

2-3-8-5 DICOM option setup requirements(continued)

Figure 2-4. Worksheet for DICOM Network Information

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-21

5718825-100 English Rev. 15 System view
Site Preparations

2-3-8-6 Installation Pre Checklist

2-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Environmental Dangers

2-4 Environmental Dangers

Commercial devices such as laser cameras, printers, VCRs and external monitors,
usually exceed allowable leakage current limits and, when plugged into separate AC
outlets, are in violation of patient safety standards. Suitable electrical isolation of such
external AC outlets, or providing the device with extra protective earth, will be required
in order to meet UL60601-1 and IEC60601-1 / IEC60601-1-1 standards for electrical
leakage.

2-4-1 Patient Vicinity UL60601-1 (USA)

2.12.20DV (UL60601-1:2003)
In area in which patients are normally cared for, the patient vicinity is the space with
surfaces likely to be contacted by the patient or attendant who can touch the patient.
This encloses a space within the room 1.83 m (6 ft.) beyond the perimeter of the bed
(examination table, dental chair, treatment booth, and the like) in its intended ___location,
and extending vertically 2.29 m (7.5 ft.) above the floor.

1. Patient environment

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 2-23

5718825-100 English Rev. 15 System view
Site Preparations

2-4-2 Patient Environment IEC60601-1 and ANSI AAMI ES60601-1

Sub Clause 3.79 and figure A.9 (IEC60601-1:2005 and ANSI AAMI
ES60601-1:2005)
Such an area is an environment in which medical diagnosis, monitoring or treatment is
carried out. It is very difficult to attach unique dimensions to the PATIENT
ENVIROMENT.
In practice a distance of 2,5 m (8.2 ft.) above the floor on which the medical personnel
stand and a horizontal distance of 1,5 m (4.9 ft.) have justified themselves as
indicative of the dimensions of the Patient Environment.
The patient environment/vicinity will be depicted as a dashed line in this procedure.
See example below.

1. Patient environment

Figure 2-5. Patient environment

2-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Chapter 3

System Setup

This chapter contains information needed to install

Vivid T8/Vivid T8 Pro system.

Included is a procedure that describes how to receive

and unpack the equipment and how to file a damage or
loss claim.

How to prepare the facility and unit of the actual

installation, and how to check and test the unit, probes,
and external peripherals for electrical safety are also
included in this procedure.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-1

5718825-100 English Rev. 15 System view
System Setup

3-1 Overview

3-1-1 Contents in this chapter

• 3-1 ‘Overview’ on page 3-2
• 3-2 ‘Setup reminders’ on page 3-3
• 3-3 ‘Receiving and unpacking the equipment’ on page 3-6
• 3-5 ‘Preparing for setup’ on page 3-18
• 3-6 ‘Completing the setup’ on page 3-19
• 3-7 ‘System Configuration’ on page 3-24
• 3-8-3 ‘Peripherals Installation Instructions’ on page 3-28
• 3-9 ‘Connectivity setup’ on page 3-41
• 3-11 ‘Paperwork after setup’ on page 3-74

3-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Setup reminders

3-2 Setup reminders

3-2-1 Average setup time

• Unpacking the Vivid T8/Vivid T8 Pro: 20 minutes
• Set up Vivid T8/Vivid T8 Pro options: 15 minutes
• DICOM Network Configuration: 30 minutes or more,
depending on the configuration
• Install Insite: 0.5 hour
The Vivid T8/Vivid T8 Pro installation and functional checkout
will take approximately 1 hour. Vivid T8/Vivid T8 Pro consoles
with optional equipment may take slightly longer.

3-2-2 Setup warnings

DANGER WHEN USING ANY TEST INSTRUMENT THAT IS CAPABLE

OF OPENING THE AC GROUND LINE (I.E., METER’S
GROUND SWITCH IS OPEN), DON’T TOUCH THE
ULTRASOUND SYSTEM!

CAUTION To prevent electrical shock, connect the unit to a properly

grounded power outlet. DO NOT use a three to two prong
adapter. This defeats safety grounding.

CAUTION DO NOT wear the ESD wrist strap when you work on live
circuits and more than 30 V peak is present.

CAUTION DO NOT operate this unit unless all board covers and frame
panels are securely in place. System performance and cooling
require this.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-3

5718825-100 English Rev. 15 System view
System Setup

3-2-2 Setup warnings(continued)

1. There are no operator serviceable components. To prevent
shock, do not remove any covers or panels. Should
problems or malfunctions occur, unplug the power cord.
Only qualified service personnel should carry out servicing.
NOTE: For information regarding packing labels, refer to LABELS
ON PACKAGE.
2. After being transported, the unit may be very cold or hot. If
this is the case, allow the unit to acclimate before you turn it
on. It requires one hour for each 2.5°C increment it's
temperature is below 3°C or above 40°C.

DANGER Equipment damage possibility. Turning the system on without

acclimation after arriving at site may cause the system to be
damaged.

CAUTION If the Ultrasound system is very cold or hot, do not turn on its power
until it has had a chance to acclimate to its operating environment.

The following table describes guidelines for reaching operational

temperatures from storage or transport temperatures.
Table 3-1: System Acclimation Time Chart

Degree C -4.5 -2 0.5 3 40 42.5 45 47.5 50 55 60

Degree F 23.9 28.4 32.9 37.4 104 108.5 113 117.5 122 131 140

hours 3 2 1 0 0 1 2 3 4 6 8

3-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Setup reminders

3-2-2 Setup warnings(continued)

CAUTION Operator Manual(s)

The User Manual(s) should be fully read and understood
before operating the Vivid T8/Vivid T8 Pro and kept near the
Ultrasound system for quick reference.

CAUTION Acoustic Output Hazard

Although the ultrasound energy transmitted from the Vivid T8/
Vivid T8 Pro probe is within AIUM/NEMA standards, avoid
unnecessary exposure. ultrasound energy can produce heat
and mechanical damage.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-5

5718825-100 English Rev. 15 System view
System Setup

3-3 Receiving and unpacking the

equipment

3-3-1 Purpose of this section

This section describes how to receive and unpack Vivid T8/Vivid
T8 Pro.

3-3-2 Contents in this section

• 3-3-3 ‘Warnings for receiving and unpacking’ on page 3-6
• 3-3-4 ‘The Tilt indicator’ on page 3-7
• 3-3-5 ‘Receiving the Vivid T8/Vivid T8 Pro’ on page 3-7
• 3-3-6 ‘Unpacking the Vivid T8/Vivid T8 Pro’ on page 3-12

3-3-3 Warnings for receiving and unpacking

GENERIC CRT
VERSION

CAUTION Two people are needed to unpack the Ultrasound system

because of its weight. Attempts to move the Ultrasound system
considerable distances or on an incline by one person could
result in injury or damage or both.
Two people are required whenever a part weighing 16 KG (35
LBS) or more must be lifted.

CAUTION Remember to use relevant personal protecting equipment

(PPE) during packing and unpacking. Check with your local
EHS representative.

3-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Receiving and unpacking the equipment

3-3-4 The Tilt indicator

3-3-4-1 Overview

Improper handling during transportation may harm the

equipment inside the package even if the package itself is
undamaged.
To make it easier to detect if the handling during transportation
has been improper, a set of Tilt indicator has been attached to
the transportation box.

Table 3-2: Tilt Watch

Description Illustration

Tilt Watch

3-3-5 Receiving the Vivid T8/Vivid T8 Pro

3-3-5-1 Overview

Improper handling during transportation may harm the

equipment inside the package even if the package itself is
undamaged.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-7

5718825-100 English Rev. 15 System view
System Setup

3-3-5-2 Examine all packages

Examine package closely at time of delivery, as described in the

procedure below.

Table 3-3: Examine all packages

Step Task Illustrations

1. Is damage apparent?
• If YES; continue with the instructions in
3-3-5-5 ‘Damage in transportation’ on
page 3-11.
• If NO; continue with the next step.

2. Is the Tilt Indicator red colored inside the

middle of the indicator?
• If YES: The Tilt Indicator has been
activated. Continue with the instructions in
3-3-5-5 ‘Damage in transportation’ on
page 3-11 before you continue with the next
step.
• If NO: continue with the next step.

1 - Red Color

3. Continue with the instructions in

3-3-6 ‘Unpacking the Vivid T8/Vivid T8 Pro’
on page 3-12.

3-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Receiving and unpacking the equipment

3-3-5-3 Position of the Tilt indicator

The Tilt indicator has been attached to the transportation box as

illustrated in the figure below.

Figure 3-1. Tilt indicator

1. Tilt Indicator
NOTE: Before cutting the straps, check Tilt Tag to make sure it has not
been triggered. If damaged, report it to the carrier. If not, then
cut the straps around the crate.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-9

5718825-100 English Rev. 15 System view
System Setup

3-3-5-4 If Tilt Indicator has triggered or is missing

The purpose of the tilt indicator label is to alert people handling a

product that it is sensitive to tipping and it must remain upright at
all times. It is basically an active "Up Arrow" that changes color if
the package is tipped 89 degrees or more from horizontal.
These labels can be false activated if tipped less than 89
degrees, and shocked or vibrated at the same time. This event
does occur, but is considered uncommon. If a package is
received with an activated tilt indicator label, there is high
degree of certainty it tipped 89 degrees or more from horizontal
during shipment.
An activated tilt indicator label does not indicate if the package
was simply “Tipped” (laid down with no impact shock) or “Tipped
Over” (free fall, with an impact shock). Using both shock
indicator labels and tilt indicator labels will help identify if a Tip
Over impact shock occurred.

Table 3-4: Tilt Indicator has triggered or is missing

Step Task

1. If the Tilt Indicator is missing:

Note on the shipping papers at the time of receipt that the Tilt
Indicator label is missing.
If the Tilt Indicator has triggered:
Note on the shipping papers at the time of receipt that the Tilt
Indicator label was activated.

2. Inspect the product for possible concealed damage.

3-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Receiving and unpacking the equipment

3-3-5-5 Damage in transportation

Follow this procedure if damage is apparent:

1. Write “Damage In Shipment” on ALL copies of the freight or
express bill BEFORE delivery is accepted or “signed for “by
a GE representative or hospital receiving agent.
2. Report the damage to the carrier.
• Whether noted or concealed, damage MUST be
reported to the carrier immediately upon discovery, or in
any event, within 14 days after receipt, and the contents
and containers held for inspection by the carrier.
• A transportation company will not pay a claim for
damage if an inspection is not requested within this 14
day period.

3-3-5-6 Vivid T8/Vivid T8 Pro transportation box label

The Vivid T8/Vivid T8 Pro transportation box label is located at

the front of the transportation box.

Figure 3-2. Vivid T8/Vivid T8 Pro transportation box label 1

Figure 3-3. Vivid T8/Vivid T8 Pro transportation box label 2

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-11

5718825-100 English Rev. 15 System view
System Setup

3-3-6 Unpacking the Vivid T8/Vivid T8 Pro

When a new system arrives, check that any components are not
damaged and are not in short supply. If shipping damage or
shortage occurs, contact the address shown in Chapter 1.

CAUTION Please carefully unpack the system, and do not dispose the
package of Vivid T8/Vivid T8 Pro, so that it can be reused for
service.

NOTE: Please check the Vivid T8/Vivid T8 Pro console is well assembly
after unpacking the system.

Table 3-5: Unpacking the Vivid T8/Vivid T8 Pro

Step Description Corresponding Graphic

1. Tear off the “stop open” mark.

2. Cut off the two packing straps around the crate.

Note: To avoid injury, hold the strap clasp with

one hand when cutting the strap.

3-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Receiving and unpacking the equipment

Table 3-5: Unpacking the Vivid T8/Vivid T8 Pro

Step Description Corresponding Graphic

3. Remove the top cover.

4. Remove the three plastic locks.

Note: Rotate the inside plastic lock

counterclockwise to remove it and then remove
the outside lock.

5. Remove the outside shipping box.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-13

5718825-100 English Rev. 15 System view
System Setup

Table 3-5: Unpacking the Vivid T8/Vivid T8 Pro

Step Description Corresponding Graphic

6. Remove the dust bag from the unit.

Note: There is no dust bag if the system is
transported by sea. Ignore this step if there is
no dust bag.

7. Remove the clear plastic (wrapped around the

Vivid T8/Vivid T8 Pro) by scissors and remove
the barrier bag from the top.

Note: Remove the PE bag if the system is

transported by air.

8. Unlock the strap.

3-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Receiving and unpacking the equipment

Table 3-5: Unpacking the Vivid T8/Vivid T8 Pro

Step Description Corresponding Graphic

9. Remove the foams beside the LCD monitor and

the front wheels.

10. Unlock the wheels, and then hold the control

panel at the front side to move the system until
the two front wheels are on the ground.

11. With one hand holding the control panel and the
other hand holding the rear handle, move the
whole system down to the ground.

12. Remove all the covers and foams from the unit.

3-3-6-1 Moving into Position

Please refer to User Manual on how to move the system.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-15

5718825-100 English Rev. 15 System view
System Setup

3-3-7 Packing the Equipment

Please pack Vivid T8/Vivid T8 Pro in the reverse order of
unpacking.

3-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Packing materials - recycling information

3-4 Packing materials - recycling

information

The packing materials for Vivid T8/Vivid T8 Pro are recyclable:

• The Transportation Box is made of spruce or similar
material. (“PHYTOSANITARY CERTIFICATE” included in all
shipments to The People's Republic of China.)
• Lever lockings (hinges) are made of zinc plated steel.
• The inner reinforcements are made of Ethafoam
(Polyethylene foam).
• The plastic foil is made of LDPE (Low Density
Polyethylene).

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-17

5718825-100 English Rev. 15 System view
System Setup

3-5 Preparing for setup

3-5-1 Verify customer order

Compare items received by the customer to that which is listed
on the delivery order. Report any items that are missing, back
ordered, or damaged.

3-5-2 Physical inspection

Verify that the system arrived intact (visual inspection).
If the system has been damaged, please refer to ‘Damage in
transportation’ on page i-16 in the beginning of this manual.

3-5-3 EMI protection

The Vivid T8/Vivid T8 Pro has been designed to minimize the
effects of Electro-Magnetic Interference (EMI). Many of the
covers, shields, and screws are provided primarily to protect the
system from image artifacts caused by this interference. For this
reason, it is imperative that all covers and hardware are installed
and secured before the unit is put into operation.
See 2-2-4‘EMI limitations’ on page 2-9 for more information
about EMI protection.

3-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Completing the setup

3-6 Completing the setup

3-6-1 Purpose of this section

This section describes how to complete the installation of Vivid
T8/Vivid T8 Pro.

3-6-2 Contents in this section

• 3-6-3 ‘System specifications’ on page 3-19
• 3-6-4 ‘Electrical specifications’ on page 3-20
• 3-6-5 ‘Connections on the I/O Rear Panel’ on page 3-21
• 3-6-6 ‘Connecting probes’ on page 3-23
• 3-6-7 ‘Powering the system’ on page 3-23

3-6-3 System specifications

3-6-3-1 System requirements verification

• Verify that the site meets the requirements listed in

Chapter 2.
(See: 2-3‘Facility needs’ on page 2-12.)
• Verify that the specifications below don’t conflict with any
on-site conditions.

3-6-3-2 Physical dimensions

Table 3-6: Physical dimensions of Vivid T8/Vivid T8 Pro

Height Width Depth Depth

1250 700 900 mm

49.3 27.6 35.5 Inches

3-6-3-3 Console Weight

• Weight: approx. 65 kg (144 lbs)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-19

5718825-100 English Rev. 15 System view
System Setup

3-6-4 Electrical specifications

WARNING Connecting a Vivid T8/Vivid T8 Pro to the wrong voltage level

will most likely destroy it.

3-6-4-1 Verification of the system’s voltage setting

Verify that the mains voltage specified for the Vivid T8/Vivid T8
Pro is available on-site.
Refer to the latest revision of the User Manual for a full list of
product labels prior to serving the system.

3-6-4-2 Electrical specifications for Vivid T8/Vivid T8 Pro

In the table below, the electrical specifications for Vivid T8/Vivid

T8 Pro includes monitor and on board peripherals.

Table 3-7: Electrical specifications for Vivid T8/Vivid T8 Pro

Part Power
Number Description Voltage Tolerances consumntion Frequency

5421435 English version Vivid T8

5498519 English version Vivid T8 with

Articulation Arm

5717593 Vivid T8 R2 basic console

H48702AK Vivid T8 R2 console with

+ flexible arm
H48702AL
100-240V ±10% Max.400VA 50/60 Hz
5498522 Chinese version Vivid T8

5498521 Chinese version Vivid T8 with

Articulation Arm

5498524 Korean version Vivid T8 with

Articulation Arm

5498523 English version Vivid T8 Pro

3-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Completing the setup

3-6-5 Connections on the I/O Rear Panel

NOTE: Accessory equipment connected to the analog and digital
interfaces must be certified according to the respective IEC
standards (e.g. IEC60950 for data processing equipment and
IEC60601-1 for medical equipment). Furthermore, all complete
configurations shall comply with the valid version of the system
standard IEC60601-1. Everybody who connects additional
equipment to the signal input part or signal output part of Vivid
T8/Vivid T8 Pro, configures a medical system, and is therefore
responsible that the Ultrasound system complies with the
requirements of the valid version of IEC60601-1. If in doubt,
consult the technical service department or your local
representative for GE.

3-6-5-1 Connect Ethernet

Connect the network cable to the Ethernet connector on the I/O

Rear Panel.
The connector is located on the rear side of Vivid T8/Vivid T8
Pro.

3-6-5-2 Connect USB Flash Drive

NOTE: USB Flash Drive approved for Vivid T8/Vivid T8 Pro are verified
for EMC performance according to EN55011 class B. The use of
any other USB Flash Drive will compromise this verification, and
may cause interference on Vivid T8/Vivid T8 Pro itself, or on
other electronic devices.
For approved models, please refer to Chapter 9.
Insert the USB Flash Drive in one of the USB ports on the Vivid
T8/Vivid T8 Pro.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-21

5718825-100 English Rev. 15 System view
System Setup

3-6-5-3 Connect S-Video (For R1.x.x only)

Connect the cable to the S-Video Out port and the external
monitor. Select S-Video in the list of signal source menu on the
external monitor.

Figure 3-4. Connect S-Video

NOTE: S-Video and composit out port are not supported on Vivid T8
system which is originally installed with software R2.x.x.

3-6-5-4 Connect External Monitor through VGA port

Connect VGA cable to the system and the external monitor

through VGA port. The screen displays on the external monitor.
The external monitor resolution should be 1280 x 1024.

Figure 3-5. Connect with VGA cable

3-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Completing the setup

3-6-6 Connecting probes

Please refer to User Manual on how to connect/disconnect a
probe.

3-6-7 Powering the system

Please refer to User Manual on how to power the system.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-23

5718825-100 English Rev. 15 System view
System Setup

3-7 System Configuration

3-7-1 Purpose of this section

This section describes how to configure the Vivid T8/Vivid T8
Pro.

3-7-2 Contents in this section

3-7-3 Vivid T8/Vivid T8 Pro configuration

For complete instructions, refer to the latest revision of the Vivid
T8/Vivid T8 Pro Basic User Manual, Chapter 16.
Information includes Entering Location, Adjusting Date and
Time, Selecting User interface Language, Selecting Online
Manual Language, Selecting Unites of Measure.

3-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Peripherals Installation

3-8 Peripherals Installation

3-8-1 Overview
This section describes how to install and configure the
peripherals validated for the Vivid T8/Vivid T8 Pro.
About the operation check-out of peripherals, 4-3-33 ‘Peripheral
checks’ on page 4-41

Table 3-8: Vivid T8/Vivid T8 Pro Peripherals

Weight
Description (kg) Power Control Model

B/W USB Printer USB port Sony UP-D898MD Printer

B/W USB Printer USB port Sony UP-D897 Printer

B/W USB Printer USB port Sony UP-D711MD Printer

Color USB Printer USB port Sony UP-D25MD Printer

Officejet 100 Printer USB port HP Officejet 100 Printer

3-Pedal Footswitch USB port MKF 2-MED GP26

3-Pedal Footswitch USB port Suns USB footswitch

(for R2.x.x only)

USB Stick USB port SanDisk USB Stick

USB2.0 HDD USB port USB HDD 1T

ECG ECG Port ECG Cable

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-25

5718825-100 English Rev. 15 System view
System Setup

3-8-2 Furnished materials

This section describes the materials furnished with the
Peripherals and with the system.
Retain the original carton and packing materials in case
transport is needed in the future.
• B/W USB Printer

Table 3-9: Materials furnished with B/W Printer

Item Description Quantity Note

1 Sony UP-D897 Printer 1

2 Sony UP-D898 MD Printer 1

2 Paper Roll 1

3 USB cable 1

• Color USB Printer

Table 3-10: Materials furnished with Color USB Printer

Item Description Quantity Note

1 Sony UP-D25MD Printer 1

2 Paper Roll 1

3 AC Power Cord (local purchase) 1

4 USB cable 1

• Digital Printer

Table 3-11: Materials furnished with B/W Printer

Item Description Quantity Note

1 HP Officejet 100 Printer 1

2 Paper Roll 1

3 USB cable 1

3-26 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Peripherals Installation

3-8-2 Furnished materials(continued)

• USB Stick

Table 3-12: Materials furnished with USB Stick

Item Description Quantity Note

1 SanDisk USB Stick 1

2 Paper Roll 1

3 USB cable 1

• USB 2.0 HDD

Table 3-13: Materials furnished with the USB 2.0 HDD

Item Description Quantity Note

1 USB 2.0 HDD 1

2 USB Cable 1

• 3 Pedal Footswitch

Table 3-14: Materials furnished with the Footswitch

Item Description Quantity Note

1 MKF 2-MED GP26 1

Footswitch

2 Suns USB Footswitch 1 For R2.x.x only

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-27

5718825-100 English Rev. 15 System view
System Setup

3-8-3 Peripherals Installation Instructions

3-8-3-1 Sony UP-D711MD Printer Installation

3-8-3-1-1 Tools
No special tools needed.

3-8-3-1-2 Manpower
One person 5 min.

3-8-3-1-3 Preparations
1. Unpack B/W Printer.

3-8-3-1-4 Installation Procedure

NOTE: The printer driver is customized for the Vivid T8/Vivid T8 Pro at
the factory; you do not need to change the settings.
1. Place the device in a suitable place.
2. Connect the USB Cable on the Printer.
3. Connect the power cord with the AC output in the wall outlet.
4. Connect the printer to the USB port, then turn on the printer.

Figure 3-6. Connect UP-D711MD to Vivid T8/Vivid T8 Pro

3-28 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Peripherals Installation

3-8-3-1-4 Installation Procedure(continued)

5. Press F2 (Config) on the Control Panel.

6. Select Connectivity-> Additional Outputs, select the
appropriate print key (Print1 or Print2) from the Button
section.

Figure 3-7. Connectivity->Additional Outputs

7. Select Printer from the Selected Devices menu, and then

select Advanced.
NOTE: After selecting the printer, the field turns Black.
NOTE: If Printer is not in the selected Devices menu, select it from
the Available Devices in the left column and press “>>” to
move to the selected Devices column.

Figure 3-8. Selected Devices

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-29

5718825-100 English Rev. 15 System view
System Setup

3-8-3-1-4 Installation Procedure(continued)

8. Select Configure.

Figure 3-9. Printer Properties

9. Select Sony UP-D711MD from the Name pull-down menu,

then select OK.

Figure 3-10. Print Setup

10. Select OK.

Figure 3-11. Printer Properties

3-30 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Peripherals Installation

3-8-3-2 Sony UP-D25MD Printer Installation

3-8-3-2-1 Tools
No special tools needed.

3-8-3-2-2 Manpower
One person 5 min.

3-8-3-2-3 Preparations
1. Unpack the Sony UP-D25MD Printer.

3-8-3-2-4 Installation Procedure

1. Place the device in a suitable place.
2. Connect the USB Cable on the Printer.
3. Connect the power cord with the AC output in the wall outlet,
then turn on the printer.
4. Connect USB cable to Vivid T8/Vivid T8 Pro USB port.

Figure 3-12. Color Printer connection

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-31

5718825-100 English Rev. 15 System view
System Setup

3-8-3-2-4 Installation Procedure(continued)

5. Press F2 (Config) on the Control Panel.

6. Select Connectivity-> Additional Outputs, select the
appropriate print key (Print1 or Print2) from the Button
section.

Figure 3-13. Connectivity->Additional Outputs

7. Select Printer from the Selected Devices menu, and then

select Advanced.
NOTE: After selecting the printer, the field turns Black.
NOTE: If Printer is not in the selected Devices menu, select it from
the Available Devices in the left column and press “>>” to
move to the selected Devices column.

Figure 3-14. Selected Devices

3-32 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Peripherals Installation

3-8-3-2-4 Installation Procedure(continued)

8. Select Configure.

Figure 3-15. Printer Properties

9. Select Sony UP-D25MD from the Name pull-down menu,

then select OK.

Figure 3-16. Print Setup

10. Select OK.

Figure 3-17. Printer Properties

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-33

5718825-100 English Rev. 15 System view
System Setup

3-8-3-3 HP Officejet 100 Printer Installation

3-8-3-3-1 Tools
No special tools needed.

3-8-3-3-2 Manpower
One person 5 min.

3-8-3-3-3 Preparations
1. Unpack the HP Officejet 100 Printer.

3-8-3-3-4 Installation Procedure

1. Place the device in a suitable place.
2. Connect the USB Cable on the Printer.
3. Connect the power cord with the AC output in the wall outlet,
then turn on the printer.
4. Connect USB cable to Vivid T8/Vivid T8 Pro USB port.

Figure 3-18. HP Officejet 100 connection

5. Refer to the Connectivity configure steps of 3-8-3-1 ‘Sony

UP-D711MD Printer Installation’ on page 3-28.

3-34 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Peripherals Installation

3-8-3-4 UP-D897/UP-D898 MD Printer Installation

3-8-3-4-1 Tools
No special tools needed.

3-8-3-4-2 Manpower
One person 5 min.

3-8-3-4-3 Preparations
1. Unpack the UP-D897/UP-D898 MD Printer.

3-8-3-4-4 Installation Procedure

1. Place the device in a suitable place.
2. Connect the USB Cable on the Printer.
3. Connect the power cord with the AC output in the wall outlet,
then turn on the printer.
4. Connect USB cable to Vivid T8/Vivid T8 Pro USB port.

Figure 3-19. UP-D897 connection

5. Refer to the Connectivity configure steps of 3-8-3-1 ‘Sony

UP-D711MD Printer Installation’ on page 3-28.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-35

5718825-100 English Rev. 15 System view
System Setup

3-8-3-5 Footswitch Installation

3-8-3-5-1 Tools
No special tools needed.

3-8-3-5-2 Manpower
One person 5 min.

3-8-3-5-3 Preparations
1. Unpack the Footswitch.
2. Ensure no physical damage.

3-36 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Peripherals Installation

3-8-3-5 Footswitch Installation(continued)

3-8-3-5-4 Installation Procedure

1. Connect the Footswitch to the USB port on the Vivid T8/
Vivid T8 Pro system.

Figure 3-20. Connect Footswitch to the system

Figure 3-21. Connect Footswitch to the system (for R2.x.x

only)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-37

5718825-100 English Rev. 15 System view
System Setup

3-8-3-5 Footswitch Installation(continued)

3-8-3-5-5 Configuring Footswitch

Footswitch supports these configurations: No Function, Select,
Image Store, Cursor, Pointer, Previous Cycle, next Cycle,
Freeze, 2D, Color, Print, Print Alt., Rec/Pause.
Enter Config (F2) -> Imaging -> Application to configure the
Footswitch functions.

Figure 3-22. Configuring Footswitch Functions

3-38 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Peripherals Installation

3-8-3-6 USB2.0 HDD Installation

3-8-3-6-1 Tools
No special tools needed.

3-8-3-6-2 Manpower
One person 5 min.

3-8-3-6-3 Preparations
1. Unpack the USB2.0 HDD.
2. Ensure no physical damage.

3-8-3-6-4 Installation Procedure

1. Connect the USB2.0 HDD to the USB port on the Vivid T8/
Vivid T8 Pro system.

Figure 3-23. Connect HDD to the system

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-39

5718825-100 English Rev. 15 System view
System Setup

3-8-3-7 ECG Installation

3-8-3-7-1 Tools
No special tools needed.

3-8-3-7-2 Manpower
One person 5 min.

3-8-3-7-3 Preparations
1. Unpack the ECG.
2. Ensure no physical damage.

3-8-3-7-4 Installation Procedure

1. Connect the ECG to the ECG cable on the Vivid T8/Vivid T8
Pro system.

Figure 3-24. Connect ECG to the system

3-40 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9 Connectivity setup

3-9-1 TCP/IP Screen

1. Press F2 on the control panel and login as admin, refer to
4-2-6 ‘Logging on to Vivid T8/Vivid T8 Pro as “ADM”’ on
page 4-12.
2. Select Connectivity on the screen.
3. Select TCP/IP tab, the screen gives an overview of the
network settings for Vivid T8/Vivid T8 Pro.

Figure 3-25. TCP/IP Screen

• Computer Name/AE Title: For Vivid T8/Vivid T8 Pro, it is

of this form: VIVIDX-00NNNN, NNNN is the system’s
serial number.
• Port No: default number is 104.
• Detailed DICOM Log: selected to turn on Detailed
DICOM Log. It will be turned off after the system restart.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-41

5718825-100 English Rev. 15 System view
System Setup

3-9-1 TCP/IP Screen(continued)

• Saving Settings: Select to archive any changes that
have been done to the TCP/IP Settings.
• Network Settings: Select to change the system’s IP
settings.
• Remote Archive Setup:
Default Setup: Remote Archive IP-Addr: 10.0.0.4
Remote Archive Name(The name of the PC or Server
with the remote archive): ECHOPAC7-000001

3-9-1-1 Changing the AE title and/or Port Number

1. To change AE Title and/or Port No, edit the respective

fields.

Figure 3-26. AE Title/Port No

2. Select Save settings to store your changes. This will bring

up a new warning screen.

Figure 3-27. Warning Message

3. Select OK to save your changes or Cancel to return without

saving any changes.
4. Reboot the system to activate the settings or continue with
other TCPIP setup tasks.

3-42 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-2 Network setup

For network connection setup, see 7-6-1 ‘Network
Configuration’ on page 7-33 for more information.

3-9-3 Setup connection to a DICOM server

Vivid T8/Vivid T8 Pro is configured to work with DICOM servers
in a network environment. Images are first saved on the local
image butter on the system. At the end of the examination the
images are sent to the DICOM server via a DICOM spooler and
to the local database, depending on dataflows.
To connect to the DICOM server, the following information has to
be entered in the system.
• The DICOM server IP address
• The DICOM server port number
• The DICOM server AE title (the server application's name)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-43

5718825-100 English Rev. 15 System view
System Setup

3-9-3 Setup connection to a DICOM server(continued)

1. Press Config (F2) on the control panel and log on as
administrator.
2. Select Connectivity and then select Dataflow tab.
3. Select the arrow to the right for the Name field to list all
dataflows in a pull-down menu and select the dataflow
DICOM Server.

Figure 3-28. Select Dataflow

• If Direct Store is enabled, the image will go to the

DICOM server immediately after it is acquired.
NOTE: Make sure the DICOM server is capable of keeping the
connection during an examination.
• If Hidden is enabled, the dataflow will be invisible in the
Search/Create Patient screen. Uncheck Hidden to
display the dataflow in the Search/Create Patient
screen.

3-44 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-3 Setup connection to a DICOM server(continued)

4. Select Dicom storage in the Selected devices, and then
select Properties to display the Properties dialog.

Figure 3-29. DICOM Server

5. Select the IP-address down-arrow to choose the DICOM

Server from the pull-down menu.

Figure 3-30. DICOM Server's Proprerties dialog

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-45

5718825-100 English Rev. 15 System view
System Setup

3-9-3 Setup connection to a DICOM server(continued)

6. Follow the steps below to change the IP-address settings:
a. From the IP-Address pull-down menu, select <Modify>
to display the IPs dialog.

Figure 3-31. Select <Modify>

b. Select the server that need to modify from the IPs dialog
and then select Modify.

Figure 3-32. Select the server to modify

c. Edit the Name and/or the IP address of the server.

Figure 3-33. Edit Name and/or Ip address

d. Select OK to save the new settings and close the

dialog.
Select Cancel to close the dialog and return to the
DICOM Properties dialog.

3-46 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-3 Setup connection to a DICOM server(continued)

7. In DICOM Server's Properties dialog,
• Enter the DICOM server AE Title. This entry is case
sensitive and must match exactly.
• Enter the DICOM server Port No (Port Number).

Figure 3-34. DICOM Server's Properties dialog

Select OK to close the DICOM properties dialog and save

the changes.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-47

5718825-100 English Rev. 15 System view
System Setup

3-9-3 Setup connection to a DICOM server(continued)

CAUTION In Image Settings, setting compression to None may lead to

very long transfer time and loops larger than 500s frames will
be trucated. In case it happens, a warning is displayed on the
screen.

The pull-down menu gives these choices:

• Jpeg - JPEG/JPG compression (Default). JPEG is not
lossless.
• None - (un-compressed data with huge files)
NOTE: If you are using compression None, it is strongly
advised to reduce Frame Rate to 25 or 30 to avoid
truncating loops.
• Rle - Run Length Encoding. This is lossless
compression.
• Quality % - Set the wanted quality %. Default value is
95%.
If files are stored with a quality lower than 95% they will
occupy less space, but loose some quality.
NOTE: Setting the quality % too low may add too much artifacts
to the images that they cannot be used for diagnosis.
If files are stored with a quality above 95%, the files will
grow much larger without almost no quality change.

Figure 3-35. DICOM SR Settings

• Allow SR
If SR is enabled, all M&A that is supported by DICOM is
sent to the DICOM server (in a separate job).
• Allow SR Private Data
By default, this function is disabled. It is intended for
receivers that can handle “Private Data”, such as
CA-1000.
• Signed Doppler Velocities
It is disabled by default. It means that signs for Doppler
Velocities are removed in the DICOM SR.

3-48 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-3 Setup connection to a DICOM server(continued)

• Retry
Max# - The number of times the software will try to
connect if the connection doesn’t succeed the first
time(s).
Interval - The interval in seconds between each attempt
to connect.
• Timeout
adjust the time-out setting.
The retry settings can be used to make jobs retry on
bad networks. There is no need to set retries for mobile
(off-line) use.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-49

5718825-100 English Rev. 15 System view
System Setup

3-9-3 Setup connection to a DICOM server(continued)

• Storage Commitment
If enable Storage Commitment, check the check-box
and select Storage commitment. In the dialog, enter IP
address, Name, AE Title and port Number.

Figure 3-36. Storage Commitment Properties

• MPPS
If enable MPPS, check the check-box and select MPPS.
In the dialog, enter IP address, Name, AE Title and port
Number.

Figure 3-37. MPPS Properties

3-50 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-3-1 Verify the Network Connection to a Device

Follow the steps below to do a First Test (TCP-IP Ping) of the

connection:
1. Highlight the device to be verified and select Properties.

Figure 3-38. DICOM Server Properties dialog

2. Select the "Smily" button to Ping the server.

NOTE: By selecting the "Smily" button, a ping is sent to the remote
server to see if it is accessible via the network. It is not a
DICOM Echo (DICOM ping), so it does not check AE title or
port number.

Figure 3-39. Ping Check

3. If the network connection to the server is OK, it will be

illustrated by a smiling face .
A sad smily indicates that the network connection is failing.
Typical causes:
• Network cable not connected
• Configuration error(s)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-51

5718825-100 English Rev. 15 System view
System Setup

3-9-4 Verify the Connection to a Device

1. Select (highlight) the device you want to verify. Select
Check to start the verification process of the connection to
the device.
NOTE: Only one device can be checked at one time.

Figure 3-40. Verify the connection

2. The verification process may use some amount of time.

When done, a check status is displayed.

Figure 3-41. Check Status

3-52 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-4 Verify the Connection to a Device(continued)

Close the warning window, a sign is displayed on the left of
the device icon, indicating if the test is passed ( ) or failed
( ).

Figure 3-42. Verification Result

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-53

5718825-100 English Rev. 15 System view
System Setup

3-9-5 DICOM SR
DICOM Structured Reporting (SR) is a standardized for medical
results. Vivid T8/Vivid T8 Pro supports the specialized form for
Adult Echo Ultrasound (TID 5200 Echocardiography Procedure
Report) and Vascular Ultrasound (TID 5100 Vascular Ultrasound
Procedure Report) for M&A results.
With the DICOM SR support, M&A for an exam can be sent at
the end of the exam or when exported from local archive. The
destination can be either a server on the network or a removable
media (DICOM Media), depending on the DICOM dataflow
selected.
TID5200 Echocardiography Procedure Report is sent if the
exam contains M&A from category Cardiac/Pediatric (heart) and
Vascular/Abdominal categories, two SR documents are sent.
TID5200 Echocardiography Procedure Report and TID 5100
Vascular Ultrasound Procedure Report do not support all M&A
results from Vivid T8/Vivid T8 Pro. They are limited to the
following:
• No unassigned measurement.
• Not modifies Simpson or Bullet methods.
• Basic derivations (Average, last, Min and Max), no
references between the derived measurements and the
ones they were made from.
• Wall Motion Scoring: individual segment scores only
according to 16-segment model, no graded hypokinesis
(only Hypokinesis is used).
DICOM SR must be activated for each DICOM device.
1. Press F2 on the control panel and log on as admin.
2. Select Connectivity-> Dataflow, the dataflow sheet is
displayed.
3. Select the DICOM dataflow to configure in the Name
pull-down menu.

3-54 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-5 DICOM SR(continued)

4. Select a DICOM storage device in the Selected devices
and then select Properties. The Properties window for the
selected DICOM storage device is displayed.

Figure 3-43. DICOM Storage Properties

5. Check the option Allow SR to enable DICOM SR.

• Allow SR Private Data: send the current exam data in
private format. This option is by default unchecked and
should only be used with DICOM storage devices that
can handle private data format.
• Signed Doppler Velocities: send signed Doppler
veloities.
6. Select OK.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-55

5718825-100 English Rev. 15 System view
System Setup

3-9-6 Export configuration

The destination for Export of patient records to Excel and
MPEGmust be configured prior to use.

3-9-6-1 Setup on the Remote Share

Required setup on the remote share:

1. Add user/password
2. Set Share permissions
3. Set Security permissions
NOTE: The User on the remote share must have all rights/controls for
the shared folder.
It is possible to set a secondary user if required by the remote
share. For more information, see3-9-6-2 ‘Configurable Remote
Path User’ on page 3-57.

3-56 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-6-2 Configurable Remote Path User

NOTE: The default User/Password is always used as primary log in

credential. No attempt is made to use the secondary user if log
in succeeds using the primary.
NOTE: The configurable User/Password is used for all remote paths
configurable throughout the system as secondary log in
credential.
NOTE: The User on the remote share must have all rights/controls for
the shared folder.
Follow these steps to set up a Secondary Remote Path User:
1. Press F2 on the control panel and log on as administrator if
required.
2. Select Connectivity -> Tools.
The Tool sheet is displayed.

Figure 3-44. The Tools sheet

3. Enter the User and Password in the respective fields.

NOTE: The filed User can either be on the form of username or
___domain\username.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-57

5718825-100 English Rev. 15 System view
System Setup

3-9-6-3 Display Dataflow screen

To configure the Export function:

1. Press F2 on the control panel and log on as administrator.
2. Select Connectivity -> Dataflow.
The Dataflow sheet is displayed.
3. Select the dataflow Misc. Export in the Name pull-down
menu.

Figure 3-45. The Dataflow sheet

3-58 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-6-4 Export to Excel

1. Select the Excel storage device in the Selected devices

column and press Properties.
The Excel properties window is displayed.

Figure 3-46. The Excel properties window

2. Select a removal media or a network volume as the

destination in the pull-down menu.
NOTE: Remote paths of network volumes must be entered once in
the Remote path field before they can be selected from the
Destination pull-down menu. See 3-9-6 ‘Export
configuration’ on page 3-56 for more information.
3. Select OK and press Config.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-59

5718825-100 English Rev. 15 System view
System Setup

3-9-6-5 Export to MPEGVue configuration

1. Select the MPEGVue device in the Selected devices column

and press Properties.
The MPEGVue properties window is displayed.

Figure 3-47. The MPEGVue properties window

2. Select a removable media or a network volume remote path

as the destination in the Destination pull-down menu.
NOTE: Remote paths of network volumes must be entered once in
the Remote path field before they can be selected from the
Destination Pull-down menu.
3. Check the options as required.
4. Select OK and press Config.

3-60 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-6-6 eVue setup

1. Press F2 on the control panel and log on as administrator.

2. Select Connectivity -> Dataflow.
The Dataflow sheet is displayed.
3. Select the dataflow Local Archive - Int. HD/eVue in the
Name pull-down menu.

Figure 3-48. eVue dataflow

4. Select eVue device in the Selected devices column and

select Properties. The eVue properties window is
displayed.

Figure 3-49. eVue Properties

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-61

5718825-100 English Rev. 15 System view
System Setup

3-9-6-6 eVue setup(continued)

5. Select a removable media or a network volume remote path

as the destination in the Destination pull-down menu.
NOTE: Remote paths of network volumes must be entered once in
the Remote path field before they can be selected from the
Destination Pull-down menu.
6. Check the options as required.
7. Select OK and press Config.

3-62 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-7 Create a new dataflow

3-9-7-1 Overview

It is possible to make new dataflows by combining the

predefined settings. The table below describes the legal
combination of inputs and outputs in a dataflow.

Table 3-15: Allowed combination of inputs and outputs in a dataflow

Remote
Database+ Database+
Remote DICOM DICOM DICOM
No Output Database Database Storage Storage Storage

Database X X

Remote X X
Database

DICOM X
Worklist

DICOM CD X
Read

DICOM USB X
device Read

Query/ X
Retrieve

Worklist/ X X
database

Worklist/ X X
remote
database

No input X
device

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-63

5718825-100 English Rev. 15 System view
System Setup

3-9-7-2 Create new dataflow with Worklist and DICOM Storage

1. Press F2 on the control panel.

2. Select Connectivity->Dataflow to display the dataflow
screen. Select Add to start the creation of a new dataflow.

Figure 3-50. Connectivity-> Dataflow

3. It brings up the Enter new name dialog. Enter a name, e.g.

Worklist-DICOM Storage, and then select OK.

Figure 3-51. Enter New Name

3-64 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-7-2 Create new dataflow with Worklist and DICOM Storage(continued)

4. Select Worklist in the Available inputs column, and then

select ->>.

Figure 3-52. Add Input

5. In the pop-up Worklist properties window, configure the

worklist’s IP address, AE title and Port number and other
necessary information.

Figure 3-53. Worklist Properties

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-65

5718825-100 English Rev. 15 System view
System Setup

3-9-7-2 Create new dataflow with Worklist and DICOM Storage(continued)

6. Select DICOM storage in the Available outputs column,

and then select ->>.

Figure 3-54. Connectivity

7. In the pop-up DICOM storage properties window, configure

the worklist’s IP address, AE title and Port number and other
necessary information.

Figure 3-55.

3-66 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-7-2 Create new dataflow with Worklist and DICOM Storage(continued)

NOTE: If the site has intergrated EchoPAC PC and CA-1000,

enable Allow SR and Allow SR Private Data. Signed
Doppler Velocities is disabled by default. This means that
signs for Doppler Velocities are removed in the DICOM SR.
8. If this dataflow should be the default at start-up, enable
Default for the dataflow.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-67

5718825-100 English Rev. 15 System view
System Setup

3-9-8 Query/Retrieve Setup

The Query/Retrieve function makes it possible to search and
retrieve DICOM data from a DICOM server for further analysis
on the Vivid T8/Vivid T8 Pro.
NOTE: You may have to set up Vivid T8/Vivid T8 Pro as a destination
on the server.

3-9-8-1 Query/Retrieve Setup on Vivid T8/Vivid T8 Pro

1. Press F2 on the control panel and log on as administrator.

2. Select Connectivity -> Dataflow.
The Dataflow sheet is displayed.
3. Select Query retrieve from the Name pull-down menu.

Figure 3-56. Select Query Retrieve

3-68 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-8-1 Query/Retrieve Setup on Vivid T8/Vivid T8 Pro(continued)

4. Select QueryRetrieve in the Selected column and then

select Properties to display the Properties dialog.

Figure 3-57. Select Properties

5. Select the DICOM Query/Retrieve server from the

IP-address pull down menu. In some cases, the server is
the same as used for DICOM Storage.
If the server is missing from the list, select Modify from the
pull down menu and edit the setup for one of the predefined
servers.
Enter the correct AE Title and Port Number for the DICOM
Query/Retrieve server in the respective fields in the Query/
Retrieve screen.

Figure 3-58. Query/Retrieve Properties

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-69

5718825-100 English Rev. 15 System view
System Setup

3-9-8-1 Query/Retrieve Setup on Vivid T8/Vivid T8 Pro(continued)

Follow the steps below to change the Search Criterias

parameters:
a. Select Search Criterias

Figure 3-59. Search Criterias

b. Select the correct tag from the pull down menu. If

needed, type in the value. Then select Add to List.

Figure 3-60. Change Search Criterias

c. Select OK to close the window.

3-70 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Connectivity setup

3-9-8-2 Query/Retrieve Verification

1. Follow the steps in 3-9-3-1 ‘Verify the Network Connection

to a Device’ on page 3-51 to verify the TCP/IP connection of
the Query/Retrieve Server.
2. Follow the steps in 3-9-3-1 ‘Verify the Network Connection
to a Device’ on page 3-51 to verify the connection to the
Query/Retrieve Server.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-71

5718825-100 English Rev. 15 System view
System Setup

3-10 Option Setup

3-10-1 Software Option Installation Procedure

NOTE: Not all features described in this section may be available or
cleared for sale in all markets. Please contact with your local GE
Ultrasound representative to get the latest information.
1. Power on the system.
NOTE: Keep the power cord connection during the installation.
2. After the power-up sequence is complete, press Config (F2)
on the control panel, and then select Admin.

WARNING For software Option Installation, the operator must login as

Administrator.

3. In System Admin tab, select New.

Figure 3-61. New Option Key

3-72 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Option Setup

3-10-1 Software Option Installation Procedure(continued)

4. In the pop-up screen, input the new key and select Save.

Figure 3-62. Dialog Window

NOTE: There is no need to restart the system after each

installation, if several option keys are installed at one time.
Select Cancel for the first several times, and select OK after
the last installation to activate all the changes.
5. After the system is powered on, check the option status.
The option status explanation:
• Permanent: This option is enabled in the system.
6. Exit and check the function of the option installed.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-73

5718825-100 English Rev. 15 System view
System Setup

3-11 Paperwork after setup

NOTE: During and after setup, the documentation (i.e. CDs with
documentation, User Manuals, Installation Manuals, etc.) for the
Vivid T8/Vivid T8 Pro and the peripherals must be kept as part of
the original Ultrasound system documentation. This ensures that
all relevant safety and user information is available during the
operation and service of the complete Ultrasound system.

3-11-1 Contents in this Section

• 3-11-2 ‘User’s Manual(s)’ on page 3-74
• 3-11-3 ‘Product Locator Installation Card’ on page 3-75

3-11-2 User’s Manual(s)

User Check that the correct User Manual(s) for the system and
software revision, is included with the installation. Specific
language versions of the User Manual may also be available.
Check with your GE Sales Representative for availability.

3-74 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Paperwork after setup

3-11-3 Product Locator Installation Card

NOTE: The Product Locator Installation Card shown may not be the
same as the provided Product Locator card.

Figure 3-63. Product Locator Installation Card (Example)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 3-75

5718825-100 English Rev. 15 System view
System Setup

3-76 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Chapter 4

General Procedures and

Functional Checks

This chapter provides procedures for quickly checking

major functions of the Vivid T8/Vivid T8 Pro and
diagnostics instructions using the built-in service
software.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-1

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-1 Overview

4-1-1 Purpose of this chapter

This chapter provides procedures for quickly checking major
functions of the scanner and diagnostics instructions using the
built-in service software.

4-1-2 Contents in this chapter

• 4-1 ‘Overview’ on page 4-2
• 4-2 ‘General procedures’ on page 4-3
• 4-3 ‘Functional checks’ on page 4-23
• 4-4 ‘Power supply test & adjustments’ on page 4-43

4-1-3 Special Equipment required

To perform these tests, you'll need any of the sector, linear, or
convex probes. (Normally you should check all the probes used
on the system).

4-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2 General procedures

4-2-1 Overview
Some procedures are used more often than other. The intention
with this section is to keep the most used procedures in one
place.

4-2-1-1 Contents in this section

• 4-2-2 ‘Power ON/Boot Up’ on page 4-5

• 4-2-3 ‘Power off’ on page 4-8
• 4-2-4 ‘LCD Monitor position adjustment’ on page 4-10
• 4-2-5 ‘LCD Monitor configuration’ on page 4-11
• 4-2-6 ‘Logging on to Vivid T8/Vivid T8 Pro as “ADM”’ on
page 4-12
• 4-2-7 ‘Service Key (Dongle, HASP)’ on page 4-13
• 4-2-8 ‘Exit to Windows Desktop from the Vivid T8/Vivid T8
Pro application software’ on page 4-14
• 4-2-9 ‘Removable media’ on page 4-16
• 4-2-10 ‘Archiving and loading presets’ on page 4-17
• 4-2-11 ‘Data Management’ on page 4-19
• 4-2-13 ‘Backup’ on page 4-19
• 4-2-18 ‘Cleaning the Trackball’ on page 4-21

CAUTION Ultrasound system requires all covers.

Operate this Ultrasound system only when all board covers and
frame panels are securely in place. The covers are required for
safe operation, good Ultrasound system performance and
cooling purposes.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-3

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

WARNING Energy Control and Power Lockout for Vivid T8/Vivid T8 Pro.
When servicing parts of the Ultrasound system where there is
exposure to voltage greater than 30 volts:
1. Follow LOCK OUT/TAG OUT procedures.
2. Turn off the breaker.
3. Unplug the Ultrasound system.
4. Maintain control of the Ultrasound system power plug.
5. Wait for at least 30 seconds for capacitors to discharge as
there are no test points to verify isolation.
6. Remove/disconnect the battery, if present.
Ultrasound System components may be energized.

4-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2-2 Power ON/Boot Up

4-2-2-1 Warnings

DANGER ALWAYS CONNECT THE ULTRASOUND SYSTEM TO A

FIXED POWER SOCKET WHICH HAS THE PROTECTIVE
GROUNDING CONNECTOR.

DANGER NEVER USE A THREE-TO-TWO PRONG ADAPTER; THIS

DEFEATS THE SAFETY GROUND.

DANGER ENSURE THAT THE POWER CORD AND PLUG ARE

INTACT AND THAT THE POWER PLUG IS THE PROPER
HOSPITAL-GRADE TYPE (WHERE REQUIRED).

CAUTION Ultrasound system requires all covers.

Operate this Ultrasound system only when all board covers and
frame panels are securely in place. The covers are required for
safe operation, good Ultrasound system performance and
cooling purposes.

CAUTION Use only power supply cords, cables and plugs provided by or
designated by GE.

NOTE: Do not cycle the Circuit Breaker ON-OFF-ON in less than five
(5) seconds. When turning OFF the Circuit Breaker, the
Ultrasound system should de-energize completely before
turning the circuit breaker ON.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-5

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-2-2-2 Connect AC (mains) Power to Vivid T8/Vivid T8 Pro

Connecting AC Power to the Vivid T8/Vivid T8 Pro ultrasound

unit, involves preliminary checks of the power cord, voltage level
and compliance with electrical safety requirements.
1. Ensure that the wall outlet is of appropriate type, and that
the Circuit Breaker is turned off.
2. Uncoil the power cable, allowing sufficient slack so that the
unit can be moved slightly.
3. Verify that the power cable is without any visible scratches
or any sign of damage.
4. Verify that the on-site mains voltage is within the limits
indicated on the rating label near the Circuit Breaker on the
rear of the unit.
5. Connect the Power Cable’s female plug to the Power Inlet at
the rear of the unit.
6. Lock the plug in position with the Retaining Clamp (ACC
Clamp).
7. Verify that the Mains Power Circuit Breaker is in OFF
position, if not, switch it OFF.
8. Connect the Power Cable’s other end (male plug) to a
hospital grade mains power outlet with the proper rated
voltage, and the unit is ready for Power ON/Boot Up.

4-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2-2-3 Switch ON the AC Power to Vivid T8/Vivid T8 Pro

1. Switch ON the Mains Power Circuit Breaker at the rear of

the unit.
You should hear a “click” from the relays in the AC Power
and the unit is ready to boot.
2. Press once on the On/Off key on the Operator Panel to boot
the unit.
During a normal boot, you may observe that:
a. The unit’s ventilation fan starts on full speed, but slows
down after a few seconds (listen to the fan sound).
b. Power is distributed to the peripherals, Operator Panel
(Console), Monitor, Front End Processor and Back End
Processor.
c. Back End Processor and rest of scanner starts with the
sequence listed in the next steps:
d. Back End Processor is turned ON and starts to load the
software.
e. The Start Screen is displayed on the monitor.
f. A start-up bar indicating the time used for software
loading, is displayed on the monitor.
g. The software initiates and sets up the Front End
electronics and the rest of the instrument.
h. The backlight in the keyboard is lit.
i. As soon as the software has been loaded, either a 2D
screen is displayed on the screen, indicating that a
probe has been connected, or a No Mode screen is
displayed, indicating that no probe has been connected.
NOTE: Total time used for start-up is typical one and a half
minutes or less. If starting after a power loss or a
lock-up, the start-up time may be up to four minutes.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-7

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-2-3 Power off

When you switch off the unit, the system performs an automatic
shutdown sequence.
The SYSTEM - EXIT menu, used when switching off the unit,
gives you these choices:

Figure 4-1. System Exit Window

• Logoff
Use this button to log off the current user.
The system remains ON and ready for a new user to log on.
If the Logoff button is dimmed, it indicates that no user is
logged on to the unit at the moment.
• Shutdown
Use this button to shut down the system. The entire system
will shut down. It is recommended to perform a full shutdown
at least once a week.
If the Shutdown button is dimmed, use the key-combination
<Ctrl+Alt+Delete> to shut down the unit.
NOTE: To enable the key-combination <Ctrl+Alt+Delete>, the
dongle should be connected to the system.
• Cancel
Use this button to exit from the System-Exit menu and
return to the previous operation.

4-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2-3 Power off(continued)

4-2-3-1 System shutdown

Disconnect the Mains Power Cable is necessary. For example:

Relocating the scanner.

CAUTION DO NOT unplug and/or transport the unit until after the power
off sequence has been completed. Failure to do so may result
in corrupted patient files.

4-2-3-2 Battery Status

When the system is running, a status icon is displayed in the

system status bar to indicate the current battery status.

Figure 4-2. Battery icon

Total battery power remaining is shown on the battery icon.

Different color stands for different battery status.

Table 4-1: Status Description

Icon Status Description

AC Power is ON; battery is fully/partially charged

(20%-100%)

AC Power is ON: battery is almost empty (10%-20%)

NOTE: The % values mentioned above may fluctuate by up to +/-3%

points.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-9

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-2-3-2 Battery Status(continued)

4-2-3-2-1 Viewing Detailed Battery Status

In order to view further details about the battery status, click on
the battery icon. A more detailed status description appears:

Figure 4-3. Battery Status Message

• Current power source.

This field displays the current power source.
• Remaining battery power.
This field displays the estimated current remaining battery
capacity.

4-2-4 LCD Monitor position adjustment

Refer to User Manual for LCD Monitor position adjustment.

4-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2-5 LCD Monitor configuration

Users operating with the 21.5 inch LCD monitor can adjust the
monitor according to the following procedures to ensure an
optimal display.
1. Press “System” in the section of “Utility”.
2. Select “21Inch LCD” from the menu of “Monitor Settings” at
the bottom left.
3. Reboot the unit.

Figure 4-4. Monitor Configuration

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-11

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-2-6 Logging on to Vivid T8/Vivid T8 Pro as “ADM”

Select Utility tab on the touch screen, then select Config.
It will bring up the Operator Login dialog where you must log
on.

Figure 4-5. Operator Login Window

1. Operator: Select the operator.

2. Password: Enter Operator’s password (optional).
3. Select the type of Login or Cancel.
• Emergency: Stores data only from current patient
examination.
• Log on: Standard login.
• Cancel: Cancel login.
As default, two users are defined, USR and ADM.
• USR
If you log on as USR, you will have access to do set-up tasks
that a user may need to do during daily use.
As default, no password has been set for USR. Just type the
name USR, and select Login.
• ADM
If you log on as ADM, you will have access to do general set-up,
service adjustments, adjust network and connectivity settings.
As default, the password for ADM is ulsadm.
Select the name ADM, the password (ulsadm) and select
Login.
It is possible for the administrator (ADM) to establish new users
and set unique passwords for each user, including a new
password for ADM. If the login as ADM fails, contact the
responsible person in the hospital to get access.

4-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2-7 Service Key (Dongle, HASP)

A Service Dongle and a proprietary GE Service password are
necessary for use by GE Service when performing proprietary
level diagnostics like accessing the desktop on the BEP. The
password used with the GE service dongle changes at specific
intervals.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-13

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-2-8 Exit to Windows Desktop from the Vivid T8/Vivid T8 Pro

application software
Follow these steps if you want to exit to the Windows Desktop
when the application software is running. The Service Dongle
must be plugged in.
1. On the alphanumeric keyboard, press Ctrl+Alt+R.
2. Select Yes to continue.

Figure 4-6. Maintenance Access

3. If the service dongle is plugged in, type the current GE

Service Password in the password field.

Figure 4-7. Maintenance Access

NOTE: READ THIS NOTE BEFORE YOU CONTINUE: After you

have selected OK, the Start Application dialog will be
displayed on screen. Be ready to select MAINTENANCE...
before the Time Bar is “full”, or the application software will
be started. A description on how to recover, if you fail to
select MAINTENANCE... is included, but you will spend
some extra time doing it.

4-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2-8 Exit to Windows Desktop from the Vivid T8/Vivid T8 Pro

application software(continued)
4. Select MAINTENANCE... to enter maintenance mode. This
will bring up the Maintenance dialog.

Figure 4-8. System halted

5. In the Maintenance window, select Exit to Windows. This

will display the Windows Desktop on the screen.

Figure 4-9. Maintenance dialog

NOTE: If you need to restart, ensure that you do a complete power

down (Shut Down). This is required to power up the Front End
Processor.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-15

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-2-9 Removable media

Refer to the latest revision of the User Manual to perform the
following tasks:
• Using Removable Media
• Labeling Removable Media
• Formatting Removable Media
• Verifying Removable Media

4-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2-10 Archiving and loading presets

NOTE: Always save presets before any software reload. This ensures
the presets loaded after the software reload are as up–to–date
as possible.
All user presets except changes to Summary, Anatomy, and
Biometry pages, can be saved on an DVD-R disk (or USB
memory device) for reloading on the system.
NOTE: Presets should NOT be saved on the same USB memory device
(or DVD-R disk) as images. The Archive Menu lists the images
but does NOT list the presets stored on a USB memory device
(or DVD-R disk).

4-2-10-1 Archiving Presets to a USB memory device (or DVD-R Disk)

1. Connect the USB memory device to the system’s USB port,

or insert an empty (blank) DVD-R disk into the DVD-RW.
2. Access to the Config/Admin Menu, and select Backup. The
Backup sheet will be shown on the LCD display.

Figure 4-10. Backup Sheet

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-17

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-2-10-1 Archiving Presets to a USB memory device (or DVD-R

Disk)(continued)

3. Select the item to Backup.

4. Enter backup destination or browse through the disk to
locate the destination.
5. Select Backup. The backup status for each item is displayed
on the Result column.

4-2-10-2 Loading Presets from a USB memory device (or DVD-R)

1. Connect the USB memory device or DVD-R with the

archived Presets to the system.
2. Access to the Config/Admin Menu, and select Restore. The
Restore sheet will be shown on the LCD display. See
Figure 4-10 on page 4-17.
3. Select the items needed to be restored.
4. Select Restore. The system performs the restore and
restarts.

4-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2-11 Data Management

Refer to the latest revision of the Vivid T8/Vivid T8 Pro User
Manual to perform the following tasks:
• Configuring the Disk Management Function
• Setting the Disk Management Schedule
• Configuring Data Management Settings
• Configuringestination Device Setting
• Running the Disk Management Function
• Starting Disk Management Manually

4-2-12 Deleting patient information

Ensure that All Patient Information has been deleted before:
• shipping/returning the Ultrasound system
• returning the Back End Processor to the local parts
organization/parts warehouse
• you dispose of the hard drive
Wipe the HDD partitions as described here:
1. Reload the system software from the software media.
2. Select: Overwrite all content on HDD.

4-2-13 Backup
For more information, refer to the latest revision of the Vivid T8/
Vivid T8 Pro User Manual.

4-2-14 Restore the factory defaults

For instructions, please see “Data Backup and Restore” in the
User Manual/User Guide.
NOTE: It is not suggested to manually delete the files in
D:\Idunn\target\resources\idunn\userdefs.

WARNING To avoid lacking of connecting to Local Archive, connecivity.res

and IPSave in D:\Idunn\target\resources\idunn\userdefs could
not be deleted. If they are deleted, refer to 7-7-4 ‘Rewrite the
Serial Number’ on page 7-50 to rewrite the system ID.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-19

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-2-15 Installation and Setup Procedure for Peripherals

Please refer to 3-8-3 ‘Peripherals Installation Instructions’ on
page 3-28.

4-2-16 Where are the User Manuals and the Service Manual?
Online versions of the User Manuals are available via the help
function.
Both the User Manuals and the Service Manual are delivered as
PDF files on a CD-ROM. Paper copies may be ordered from
GE.

4-2-17 How to display or print the PDF files from the Manual CD?
1. Insert the CD-R disk (CD-ROM) into the CD-drive on a PC
or Laptop with Adobe Acrobat Reader.

CAUTION Do not try to use the Vivid T8/Vivid T8 Pro to read these files, it
will not work!

2. Follow the instructions on the screen to display the manual

of choice.
3. Before printing the complete manual, or pages from the
manual, select File > Page Setup.
4. Select the paper size and choose Portrait.
5. Select File > Print to start printing. In the pop up window,
you may choose which pages to print and the number of
copies you want to print (usually 1 copy).

4-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 General procedures

4-2-18 Cleaning the Trackball

WARNING DO NOT touch any boards with integrated circuits prior to

taking the necessary ESD precautions.
Always connect yourself, via an arm-wrist strap, to the advised
ESD connection point located on the rear of the Ultrasound
system (near the power connector).
Follow general guidelines for handling of electrostatic sensitive
equipment.

4-2-18-1 Manpower

One person, 10 minutes,

4-2-18-2 Tools

• Antistatic brush and/or antistatic vacuum cleaner

4-2-18-3 Preparations

To get access to the trackball for cleaning, you must perform the
following steps:
1. Power down the system.
2. Disconnect the mains power cable from the wall outlet.
Follow these links if you need more information: 4-2-3 ‘Power
off’ on page 4-8

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-21

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-2-18-4 Clean the Trackball

Dust is often building up behind the ball, so it interferes with the

ball rotation and for optical trackballs the light used for sensing.
To get access for cleaning, you need to remove the ball.
The ball is held in position by the Dust Gasket.
1. Power off the system.
2. Rotate the dust gasket counterclockwise until it can be
removed from the keyboard.

Figure 4-11. Remove the retainer

3. Separate the trackball and the gasket. Wipe off any oil or
dust from the trackball, gasket and the trackball housing
using a cleaner or cotton swab.
4. Assemble the trackball and gasket, then put it into the
housing and rotate it clockwise until its notches are set in
the position.

CAUTION When cleaning, make sure not to spill or spray any liquid into
the trackball housing (keyboard or system).

4-2-18-5 Test the Trackball

Power up the system and test that the trackball now works as
intended.

4-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3 Functional checks

4-3-1 Overview
In this section, the functional checks for Vivid T8/Vivid T8 Pro
are described. Functional checks are used to verify that the
product works as intended. Functional checks may also be used
during troubleshooting.

4-3-2 Contents in this Section

4-3-3 Preparation
Turn on power to Vivid T8/Vivid T8 Pro. For detailed description,
4-2-2 ‘Power ON/Boot Up’ on page 4-5

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-23

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-3-4 Basic Controls

4-3-5 Operator Panel

Figure 4-12. Control Panel Map

1. Power On/Off Switch 11. Auto 21. Caliper key

2. Patient Key 12. Trackball 22. Store key
3. Probe Key 13. Set key 23. Zoom
4. Image Review 14. Update/Menu key 24. Depth
5. Worksheet 15. User Defined key 25. Freeze and Pause key
6. TGC Sliders 16. User Defined key 26. P1 and P2 print keys
7. Active mode 17. Flex key 27. Left/Right key
8. 2D mode 18. Text key 28. Layout key
9. Scan mode Controls 19. Measurement 29. Volume
10. Cursor Key 20. Clear key 30. AN keyboard
31. Rotary buttons

4-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3-6 Touch panel

The Touch panel enables the access of context specific controls.
The mode/function specific controls are organized in tabbed
folders. Within each folder several pages may be accessed.
Only the folders available in the current state are displayed and
can be accessed by pressing the corresponding folder tab on
the Touch panel.
At the bottom of the Touch panel, there are five combination
rotary/push buttons. The functionality of these rotaries changes,
depending upon the currently-displayed folder/page.

4-3-7 Performance Tests

4-3-7-1 Test Phantoms

The use of test phantoms is only recommended if required by

your facility's (customer’s) QA program.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-25

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-3-8 2D Mode (B mode) Checks

4-3-8-1 Introduction

The 2D Mode is the system’s default mode.

4-3-9 2D Mode Screen Example

4-3-10 Preparations
• Connect one of the probes.
• Turn ON the scanner.
The 2D Mode is displayed (default mode).

4-3-11 Adjust the 2D mode controls

Press 2D on the Operator Panel to access 2D mode.
These Image Controls are used to optimize the 2D picture.
Verify that all the listed controls are working as intended:
• Use Gain and TGC controls to optimize the overall image
together with the Power control.
• Use Depth to adjust the range to be imaged.
• Use Focus to center the focal point(s) around the region of
interest.
• Use Frequency (move to higher frequencies) or Frame rate
(move to lower frame rate) to increase resolution in image.
• Use Frequency (move to lower frequency) to increase
penetration.
• Use the Reject control to reduce noise in the image.
• Use the DDP control to optimize imaging in the blood flow
regions and make a cleaner, less noisy image.
• Use UD Clarity (Cardiac) or UD Sp. Red. (non-cardiac) to
reduce image speckle. Extra care must be taken to select
the optimal Speckle reduction level, as too much filtering of
speckle can mask or obscure desired image detail.
• Use Adaptive reject (Cardiac) to reduce near field haze
and blood pol artifact without diluting tissue appearance of
moving structures.

4-26 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3-12 Image Quality Check (IQC) preset for service

Image Quality Check (IQC) is intended to facilitate Image
Quality checks during Quality Assurance Evaluation. Quality
Assurance tests are used to determine whether a scanner is
providing the same level of performance year after year.
By using the same setting year after year, this ensures that the
data collection consistent, independently of who performs the
test.
This preset only includes fundamental settings for 2D mode.
Processing modes like SRI, Harmonics, etc., are turned off.
To do IQC, follow the steps below:
NOTE: The IQCforService is only visible when service dongle is
connected to the system.
1. Press Probe button on the control panel.
2. Select the proper probe, and then select IQCforService in
the Applications column.

Figure 4-13. Image Quality Check

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-27

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-3-13 M Mode Checks

4-3-14 M-Mode Screen Example

4-3-15 Preparations
• Connect one of the probes to the scanner’s left-most probe
connector.
• Turn ON the scanner.
The 2D Mode window is displayed (default mode).
• Press MM on the Operator panel to bring up an M-Mode
picture on the screen.
Use the trackball to position the cursor over the required
area of the image.

4-3-16 Adjust the M Mode controls

These Image Controls are used to optimize the M mode picture.
Verify that all the listed controls are working as intended:
• Adjust Horizontal sweep to optimize the display resolution.
Adjust Gain and TGC controls to adjust the range to be
imaged.
Use the Frequency (move to higher frequencies) or the
Frame rate control (move to lower frame rate) to increase
resolution in image.
Use the Frequency (move to lower frequency) to increase
penetration.
Adjust Focus to move the focal point(s) around the region of
interest in the M-Mode display.
Adjust Dynamic range to optimize the useful range of
incoming echoes to the available grey scale.
Adjust Compress and Edge Enhance to further optimize
the display.
Adjust Reject to reduce noise while taking care not to
eliminate significant low-level diagnostic information.

4-28 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3-17 Color Mode Checks

4-3-17-1 Introduction

Color Flow screens are 2D or M Mode screens with colors

representing blood or tissue movement.
Color Flow may be selected both from 2D mode or from M mode
or a combination of these.

4-3-17-2 Preparations

• Connect one of the probes to the scanner’s left-most probe

connector.
• Turn ON the scanner.
The 2D Mode window is displayed (default mode).

4-3-18 Select Color 2D Mode

1. From an optimized 2D image, press Color.
2. Use the trackball to position the ROI frame over the area to
be examined.
3. Press Select. The instruction Size should be highlighted in
the trackball status bar. Use the trackball to adjust the
dimension of the ROI.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-29

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-3-19 Adjust the Color 2D Mode controls

• Adjust the Active mode gain to set the gain in the color flow
area.
Adjust Scale to the highest setting that provides adequate
flow detection.
NOTE: The scale value may affect FPS, Low Velocity Reject, and
Sample Volume.
Adjust Low Velocity Reject to remove low velocity blood
flow and tissue movement that reduces image quality.
Adjust Variance to detect flow disturbances.
Adjust Sample volume (SV) to a low setting for better flow
resolution, or a higher setting to more easily locate disturbed
flows.
Adjust Frequency to optimize the color flow display. Higher
settings improve resolution. Lower settings improve depth
penetration and sensitivity. This does not affect the
frequency used for 2D and M-Mode.
NOTE: Frequency setting may affect FPS, SV and Low Velocity
Reject.
Adjust Power to obtain an acceptable image using the
lowest setting possible.
NOTE: The Power setting affects all other operating modes.
Adjust the following settings to further optimize display of the
image:
• Use Invert to reverse the color assignments in the color flow
area of the display.
Use Tissue priority to emphasize either the color flow
overlay, or the underlying grey scale tissue detail.
Use Baseline to emphasize flow either toward or away from
the probe.
Use Radial and Lateral Averaging to reduce noise in the
color flow area. Radial and Lateral Averaging smooths the
image by averaging collected data along the same
horizontal line. An increase of the lateral averaging will
reduce noise, but this will also reduce the lateral resolution.

4-30 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3-20 Select Color M Mode

1. Select M Mode.
2. Use the trackball to position the ROI frame over the area to
be examined.
3. Press Select. The instruction Size should be highlighted in
the trackball status bar. Use the trackball to adjust the
dimension of the ROI.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-31

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-3-20-1 Adjust the Color M Mode controls

• Adjust the Active mode gain to set the gain in the color flow
area.
Adjust Scale to the highest setting that provides adequate
flow detection.
NOTE: The scale value may affect FPS, Low Velocity Reject, and
Sample Volume.
Adjust Low Velocity Reject to remove low velocity blood
flow and tissue movement that reduces image quality.
Adjust Variance to detect flow disturbances.
Adjust Sample volume (SV) to a low setting for better flow
resolution, or a higher setting to more easily locate disturbed
flows
Adjust Frequency to optimize the color flow display. Higher
settings improve resolution. Lower settings improve depth
penetration and sensitivity. This does not affect the
frequency used for 2D and M-Mode.
NOTE: NOTE: Frequency setting may affect FPS, SV and Low
Velocity Reject.
Adjust Power to obtain an acceptable image using the
lowest setting possible.
NOTE: The Power setting affects all other operating modes.
Adjust the following settings to further optimize display of the
image:
• Use Invert to reverse the color assignments in the color flow
area of the display.
Use Tissue priority to emphasize either the color flow
overlay, or the underlying grey scale tissue detail.
Use Baseline to emphasize flow either toward or away from
the probe.
Use Radial and Lateral Averaging to reduce noise in the
color flow area. Radial and Lateral Averaging smooths the
image by averaging collected data along the same
horizontal line. An increase of the lateral averaging will
reduce noise, but this will also reduce the lateral resolution.

4-32 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3-21 PW/CW Doppler Mode Checks

4-3-21-1 Introduction

PW and CW Doppler are used to measure velocity (most often

in blood).
Doppler mode can be done with a special pencil probe or with
an ordinary probe. By using an ordinary probe, you can first
bring up a 2D picture for navigation purpose and then add PW/
CW Doppler.

4-3-21-2 Preparations

• Connect one of the probes to the scanner.

• See 4-3-26 ? Probe/Connectors Check ? on page 4- 37
for info about connecting the probes.
For available probes, see 9-3-12 ‘Probe’ on page 9-36:
• Turn ON the scanner
The 2D Mode window is displayed (default mode).
• If needed, adjust the Display’s Brightness and Contrast
setting.
Press PW or CW to start Pulsed Wave Doppler (PW) or
Continuous Wave Doppler (CW).
Use the trackball to select the Area of Interest (Sample
Volume) in PW or direction of interest in CW.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-33

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-3-22 Adjust the PW/CW Doppler Mode controls

Adjust the Active mode gain to set the gain in the spectral
Doppler area.
• Adjust Low velocity reject to reduce unwanted low velocity
blood flow and tissue movement.
In PW mode, adjust Sample volume to low setting for better
resolution, or higher setting to more easily locate the
disturbed flows.
Adjust the Compress setting to balance the effect of
stronger and weaker echoes and obtain the desired intensity
display.
Adjust Frequency to optimize flow display. Higher setting
will improve resolution and the lower setting will increase the
depth penetration.
Adjust Frame rate to a higher setting to improve motion
detection, or to a lower setting to improve resolution.
NOTE: Frequency and Frame rate settings may affect the Low
Velocity Reject.
Adjust Power to obtain an acceptable image using the
lowest setting possible. This is particularly important in CW
mode, as the energy duty cycle is 100% (constant).
NOTE: The Doppler Power setting affects only Doppler operating
modes.
Adjust the following settings to further optimize the display
of the image.
Use the Horizontal sweep to optimize the sweep speed.
To view signal detail, adjust Scale to enlarge the vertical
spectral Doppler trace.
Use Invert to reverse the vertical component of the spectral
Doppler area of the display.
Use Angle correction to steer the ultrasound beam to the
blood flow to be measured.

4-34 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3-23 Tissue Velocity Imaging (TVI) Checks

4-3-23-1 Introduction

TVI calculates and color codes the velocities in tissue. The

tissue velocity information is acquired by sampling of tissue
Doppler velocity values at discrete points. The information is
stored in a combined format with grey scale imaging during one
or several cardiac cycles with high temporal resolution.

4-3-23-2 Preparations

• Connect one of the probes, to the scanner’s left-most probe

connector.
• See 4-3-26 ‘Probe/Connectors Check’ on page 4-37 for info
about connecting the probes.
For available probes, see 9-3-12 ‘Probe’ on page 9-36:
• Turn ON the scanner.
The 2D Mode window is displayed (default mode).
• If needed, adjust the Display’s Brightness and Contrast
setting.
Press TVI.
Use the trackball (assigned function: Pos) to position the
ROI frame over the area to be examined.
Press Select. The instruction Size should be highlighted in
the trackball status bar.
NOTE: If the trackball control pointer is selected, press trackball to
be able to select between Position and Size controls.
Use the trackball to adjust the dimension of the ROI.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-35

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-3-24 Adjust the TVI Controls

• To reduce quantification noise (variance), the Nyquist limit
should be as low as possible, without creating aliasing. To
reduce the Nyquist limit: Reduce the Scale value.
NOTE: The Scale value also affects the frame rate. There is a trade
off between the frame rate and quantification noise.
TVI provides velocity information only in the beam direction.
The apical view typically provides the best window since the
beams are then approximately aligned to the longitudinal
direction of the myocardium (except near the apex). To
obtain radial or circumferential tissue velocities, a
parasternal view must be used. However, from this window
the beam cannot be aligned to the muscle for all the parts of
the ventricle.
NOTE: PW will be optimized for Tissue Velocities when activated
from inside TVI.

4-3-25 Basic Measurements

NOTE: The following instructions assume that you first scan the patient
and then press Freeze.

4-3-25-1 Check Distance and Tissue Depth Measurement

1. Press Measure once to display an active caliper.

2. Move the trackball to position the active caliper at the start
point (distance) or the most anterior point (tissue depth).
3. Press Set to fix the start point.
4. The system fixed the first caliper and displays a second
active caliper.
5. Move the trackball to position the second active caliper at
the end point (distance) or the most posterior point (tissue
depth).
6. Press Set to complete the measurement. The system
displays the distance or tissue depth value in the
measurement results window.
NOTE: To toggle between active calipers, rotate Cursor Select button.

4-36 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3-26 Probe/Connectors Check

NOTE: Probes can be connected at any time, whether the unit is ON or
OFF.

4-3-26-1 To connect a Probe

1. Place the probe’s carrying case on a stable surface and

open the case.
2. Carefully remove the probe and unwrap the probe cable.
3. Put the porbe in the probe holder.

CAUTION DO NOT allow the probe head to hang free. Impact to the
probe head could result in irreparable damage.

4. Hold the probe connector vertically with the cable pointing

upward.
5. Slide the connector lock to the left (unlocked position).
6. Align the connector with the probe port and carefully push
into place.
7. Slide the connector lock to the right position to secure the
probe connector.
8. Carefully position the probe cable in the probe cord holder
spot so it is free to move, but not resting on the floor.

CAUTION TAKE THE FOLLOWING PRECAUTIONS WITH THE PROBE

CABELS:
-KEEP AWAY FROM THE WHEELS
-DO NOT BEND
-DO NOT CROSS CABLES BETWEEN PROBES

Table 4-2: Probe and Connectors Checks

Step Task Expected Results

1 Select the appropriate connected probe from the The probe activates in the currently-selected
probe indicators on the Touch Panel. operating mode. The probe’s default settings
for the mode and selected exam are used
automatically.

2 Launch the application. To change application, The selected application starts.

press Probe key on the Control Panel.

3 Verify there’s no EMI/RFI or artifacts specific to the No EMI/RFI or artifacts.

probe.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-37

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

Table 4-2: Probe and Connectors Checks

Step Task Expected Results

4 Test the probe in each active connector slot. It will display pictorial data each time.

5 Do a leakage test on the probe, 10-7 ‘Electrical It passes the test.

safety tests’ on page 10-28

6 Repeat this procedure for all available probes.

Not all the types of RS probe connector can match the Vivid T8/
Vivid T8 Pro system.

Figure 4-14. RS type probe connector

1. Not match
2. Match
3. Match
4. Match

4-3-27 ECG Check

4-3-27-1 Introduction

The ECG capability on this unit, is intended as use as a trigger

for measurements, but can also be viewed on the screen.

4-3-27-2 Parts needed

• ECG Pads (3 pc)

• ECG Cable Europe Kit (H48432AG) or US Kit (H48432AH)

4-3-27-3 Preparations

None

4-38 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3-27-4 ECG Check

Table 4-3: ECG Checks

Step Task Expected Result(s)

1 Connect the ECG harness to the connector The unit displays a straight curve along the
under the control panel. bottom edge of the image sector on the screen.

2 Connect the three leads to an ECG simulator, When connecting, the signal on the screen will
or be noisy.
Fasten the three ECG Pads to your body and When the connection is completed, a typical
connect the three leads to respective ECG clean ECG signal is displayed.
Pad.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-39

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-3-28 Cineloop Check

4-3-28-1 Introduction

A cineloop is a sequence of images recorded over a certain time

frame. When using ECG the time frame can be adjusted to
cover one or more heart cycles. When frozen, the System
automatically displays the cineloop boundary markers on either
side of the last detected heart cycle.

4-3-29 Preparation
• Connect one of the probes to the scanner.
• See 4-3-26 ‘Probe/Connectors Check’ on page 4-37 for info
about connecting the probes
For available probes, see 9-3-12 ‘Probe’ on page 9-36:
• Turn ON the scanner. The 2D Mode is displayed (default
mode).

4-3-30 Adjust the Cineloop controls

• Press Freeze.
The left and right markers are displayed on either side of the
last detected heart cycle on the ECG trace.
• Press Freeze.
The selected heart beat is played back.
• Press Freeze to freeze the cineloop.
Use the trackball to scroll through the acquisition and find
the sequence of interest.
• Adjust Cycle select to move from heart beat to heart beat
and select the heart cycle of interest.
Adjust Num cycles to increase or decrease the number of
heart beats to be played back.
Adjust Left marker and Right marker to trim or expand the
cineloop boundaries.

4-40 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Functional checks

4-3-31 Back End Processor checks

• If all the previous tests have been passed successfully, the
Back End Processor is most likely OK.
If the system seems to be operating erratically, please refer
to ‘Diagnostics/Troubleshooting’ on page 7-1.

4-3-32 Operator Panel Test

• The Operator Panel is tested when the Vivid T8/Vivid T8 Pro
is powered up as part of the start-up scripts, run at every
start-up.
For more info, please refer to ‘Diagnostics/Troubleshooting’
on page 7-1.

4-3-33 Peripheral checks

4-3-33-1 Printer checks

The internal printer is controlled from the P1 and P2 keys on the

Vivid T8/Vivid T8 Pro’s Operator Panel.
The factory default is:
• P1 for the UP-D711MD printer
P2 for the whole screen secondary capture to clipboard

4-3-34 Turn OFF Power to Vivid T8/Vivid T8 Pro

4-2-3 ‘Power off’ on page 4-8

4-3-35 Mechanical Functions Checks

4-3-35-1 Operator Panel Movement

Please refer to:

• 4-2-4 ‘LCD Monitor position adjustment’ on page 4-10

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-41

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-3-35-2 Casters (Wheels) and Brakes Checks

Examine the wheels frequently for defects to avoid breaking or

jamming.

Table 4-4: Wheel Characteristics

Wheel Characteristics

Front and Rear Swivel and Brake

4-42 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Power supply test & adjustments

4-4 Power supply test & adjustments

4-4-1 Power Supply Test Procedure

There is no need to do any special tests on the Power Supplies
if there don’t seems to be a problem that may be related to the
Power Supply.
Refer to 7-7-1-1 ‘System Doesn’t Boot’ on page 7-43, if you
appear to have a problem that may be related to the Power
Supplies.

4-4-2 Power Supply Adjustment

There are no adjustments on the power supply. The DC Power
is self-regulated. If a voltage is outside the specified range, it
means that something is wrong, either with the power supply
itself or with a unit connected to that specific power outlet. When
an error occur, the power will be turned off immediately.
Refer to 7-7-1-1 ‘System Doesn’t Boot’ on page 7-43, if you
appear to have a problem that may be related to the Power
Supplies.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-43

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-5 Application Turnover Check List

Complete these checks before returning the scanner to

customer for use:

4-5-1 Software Configuration Checks

Table 4-5: Software Configuration Checks

Step Task to do Notes

1 Verify Date and Time is correct.

2 Verify that Location (Hospital Name) is correct.

3 Verify Language settings are correct.

4 Verify assignment of Print Keys.

5 Verify all of the customer’s options are set up Demo Option strings turn on
correctly.

4-44 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Site Log

4-6 Site Log

Table 4-6: Site Log

DATE SRVICE PERSON PROBLEM COMMENTS

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 4-45

5718825-100 English Rev. 15 System view
General Procedures and Functional Checks

4-46 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Chapter 5

Components and Functions

(Theory)

This chapter explains Vivid T8/Vivid T8 Pro’s system

concepts, component arrangement, and subsystem
functions.

It also describes the power distribution and the

Common Service Desktop interface.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-1

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-1 Overview

5-1-1 Contents in this chapter

• 5-1 ‘Overview’ on page 5-2
• 5-2 ‘Block Diagram and Theory’ on page 5-3
• 5-3 ‘Power Diagram’ on page 5-19
• 5-4 ‘Common Service Platform’ on page 5-20

5-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Block Diagram and Theory

5-2 Block Diagram and Theory

5-2-1 General Information

Vivid T8/Vivid T8 Pro is an ultrasound imaging scanner.
The system can be used for:
• 2D Gray Scale
• 2D Color Flow imaging
• M-Mode Gray Scale imaging
• Color M-Mode
• Doppler
• Different combinations of the above
Signal flow from the Probe Connector Panel to the Front End, to
the Mid Processors and Back End Processor and finally to the
LCD and peripherals.
System configuration is stored on a hard disk drive and all
necessary software is loaded from the hard disk drive on power
up.

5-2-2 Top Console

The Top Console includes a Standby/On switch, a keyboard,
different controls for manipulating the picture quality, controls for
use in Measure & Analyze (M&A), and loudspeakers for stereo
sound output (used during Doppler scanning).

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-3

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-2-3 Block Diagram

5-2-3-1 System Diagram

Figure 5-1. Vivid T8/Vivid T8 Pro System Block Diagram

5-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Block Diagram and Theory

5-2-3-2 Introduction

WMST provides the main control function, 64 channels

transmitting/receiving and related signal processing, and
connects to CWD board.
SMIO board receives MISC signals from PWMST board and
make necessary processing. And then, PMIO sends to Rear
Panel and KBDTRSF board.
KBDTRSF board receives MISC signals from PMIO board. It
males necessary processing and then sends to LCD monitor,
touch panel, main KBDboard, SoftKBD board and system
speakers.
APSTRSF is a power supply board in Vivid T8/Vivid T8 Pro, it
accepts power from APS module and ACDC adapter. Under the
PWMST’s control, it generates all kinds of voltages to meet the
power requirements of PWMST.
Power Control PWA is assembled in the power box. It provides
an interface for AC power input and provides isolated AC power
output for the system.
Relay board provides an interface for PWMST and four probes.
It transmits/receives signals from PWMST and provides an
interface for drive the LED board.
Rear Panel and BNC Board will receive MISC signals from
PMIO board and make necessary processing. It provides MISC
user interface.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-5

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-2-4 WMST PWA

Figure 5-2. WMST module overview

5-2-4-1 Description

WMST PWA is the key part of ultrasound system. It generates

transmit signals and receives the echo signals from probe. It
consists of CPU, mid-processing FPGA, beamforming FPGA,
scan-controller (DSP).

Major Components • 64-channel Pulser

• 64-channel AFE
• 64-channel BF FPGA
• Mid-processing FPGA
• PCIE bridge
• DSP
• Internal DC/DC

Physical Interface • Connected to WDC

• Connected to SMIO
• Connected to SRLY
• Connected to CWD baord

5-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Block Diagram and Theory

Electrical Interface • High voltage input: +/-SHV (about +/-85V), +/-THV (about +/-70V)
• Low voltage input: +5v, -5v, +12V, +3.5V, +1.8V
• Probe and relay control signals
• Power on/off control signals
• I2C bus signals to control high voltage
• CWD signals
• DDI signals for display from CPU
• Audio signals from CPU
• USB signals from CPU
• Ethernet signals from CPU

Major function • DC/DC generation

• Transmit signals generation
• Echo signals receiving
• Echo signals Beam forming
• Scan control
• Generate display, USB, Audio signals

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-7

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-2-5 SMIO PWA

Figure 5-3. SMIO Overview (For R1.x.x)

5-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Block Diagram and Theory

5-2-5 SMIO PWA(continued)

Figure 5-4. SMIO Overview (For R2.x.x)

5-2-5-1 Dscription

SMIO PWA provides miscellaneousinterface for user and

internal use The board generates several +5V and +12V power
supplies from its DC/DC circuit and provide to the board itself,
LCD, USB, HDD, fan and keyboard from a unique +18V input.
The DC printer has a +18V power supply route in the board,
which can be powered once the system powers on..

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-9

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

Major Components • 1x audio stereo connector

• 1x keyboard connector
• 1x HDMI connector
• 1x dual USB connector
• 1x HDD power supply connector
• 2x Fan power supply connectors
• 1x DC input connector
• 1x signal input connector from system

Physical Interface • Connected to SFPC (WMST)

• Connected to ACDC
• Connected to LCD
• Connected to SKBD
• Connected to HDD
• Connected to Fan
• Connected to BNC connector

Electrical Interface • Power input: +18V

• Power button signals
• Reset signals
• PS_ON signal
• I2C bus to board control
• VGA RGB signals
• Audio signals
• DP signals
• Ethernet signals
• USB signals

Major function • DC/DC generation

• HDMI level-shifter
• VGA to TVOUT convert
• High-speed USB convert
• Full speed USB isolation
• VPRT power supply control

5-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Block Diagram and Theory

5-2-6 SKBD PWA

Figure 5-5. SKBD PWA Overview

5-2-6-1 Description

SKBD PWA supports an alphanumeri keybaord, US key for

ultrasound system, backlighting and touch panel option.

Major Components • 1x connector to SMIO

• 1x USB connector to SMIO
• 1x USB connector to touch panel
• 1x power connector to touch panel
• 2x speaker connector
• 2x connectors for trackball
• 1x connector for AN key

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-11

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

Physical Interface • Connected to SMIO

• Connected to trackball
• Connected to Touch Panel
• Connected to AN key
• Connected to Speaker

Electrical Interface • Power input: +12V/+5V

• Power button signals
• Audio signals
• USB signals

Major function • AN key input

• US key input
• Trackball

5-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Block Diagram and Theory

5-2-7 WPWR PWA

Figure 5-6. WPWR PWA Overview (For R1.x.x)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-13

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-2-7 WPWR PWA(continued)

Figure 5-7. WPWR PWA Overview (For R2.x.x)

5-2-7-1 Description

WPWR PWA supports an MST board and IO board power.

Major Components • 1x connector of charge

• 1x connector of fan
• 1x connector for WMST
• 1x power connector for ACDC module

Physical Interface • Connected to battery pack

• Connected to fan
• Connected to WMST board
• Connected to ACDC module

5-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Block Diagram and Theory

Electrical Interface • Connected to battery pack

• Connected to fan
• Connected to WMST board
• Connected to ACDC module

Major function • Connected to battery pack

• Connected to fan
• Connected to WMST board
• Connected to ACDC module

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-15

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-2-8 Relay Board

Figure 5-8. Relay Board Overview

5-2-8-1 Description

Relay board PWA implements 64-channel into 128-channel

multiplexing using relay matrix. And it switches those 128
channel element signals, probe control signals and high-voltage
power to the selected probe port. It also reports probe status
and types to WMST PWA through the connector.
LED board connected to relay board is to indicate which probe is
activated.

Major Components • 4 x RS Connectors (For Relay PWA)

• 1x 300PIN BGA Connectors
• Relays to select signal path
• EEPROM stores board ID information which can be ready by PWMST
• 4 pcs high voltage analog switches which implement 64-channel
signals to 128-element signal mulplexing
• 4 pcs CMOS bus switch ICs implement probe control signal for APM
tesing

5-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Block Diagram and Theory

Physical Interface • Connected to WMST

• Connected to probes

Electrical Interface Interface to RS Probe connector:

• 128 element signals
• High voltage power: +/-SHV (about +/-85V)
• Low voltage power: 5V
• I2C interface for board ID reading (stored in on-board EEPROM)
• I2C interface for probe ID reading
• PPTY probe ID reading
• Probe plug well indication signals
• Probe ID indication signals
Interface to WMST (300Pin BGA Connector)
• 64-channel signals
• Probe control signals
• 64-channel-to-128-element multiplexing control signals
• High voltage power: +/-SHV (about +/-85V)
• Low voltage power: 5V, 12V
• I2C signals
• APM trigger signal

Major function • Support 4 ports for RS type probe

• Receives analog/digital/power signals from WMST through a
connector
• Transition 64-channel into 128-element transmit/receive
• Under the control of WMST, select one probe and transmit all probe
related signals (analog/digital/power) to that probe

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-17

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-2-9 SUSB PWA

Figure 5-9. SUSB PWA

5-2-9-1 Description

SUSB PWA provides 3 USB interface and DC printer power

supply VPRT. One of the USB interfaces is for the DC printer.
DC/DC generate internal power supply from VPRT input for USB
hub circuit.

Major Components • 3 x USB down-stream connector

• 1 x USB up-stream connector
• 4 x DC connector for printer
• 1 x power supply connector

Physical Interface • Connected to DC printer

• Connected to SMIO

Electrical Interface • Power input: +18V

• USB signals

Major function • DC/DC generation

• High-speed USB Hub

5-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Power Diagram

5-3 Power Diagram

5-3-1 Overview
The AC Power assy’s main tasks are to isolate and output to the
DC/DC unit which is inside the system console. The input of AC
power pack will be the AC outlet and it’s universal, the range is
AC 90V-264V, 47-63Hz. And no main power switch located on
this power pack.

5-3-2 AC Power
The mains cord has plugs in one side end. A male plug connects
to the mains outlet on site.
The mains voltage is routed to the AC power pack through a
Circuit Breaker located on the site.
The Circuit Breaker is of the auto fuse type, if for some reason
the current grows to high, the switch will automatically break the
power.
From the Main Circuit Breaker, the AC power is routed via an
Inrush Current Limiter to a internal outlet connector for the
Mains Transformer.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-19

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4 Common Service Platform

5-4-1 Introduction
The Service Platform contains a set of software modules that
are common to all PC backend ultrasound and cardiology
systems. The Common Service Platform will increase service
productivity and reduce training and service costs.

5-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-2 Global Service User Interface (GSUI)

5-4-2-1 Internationalization

The user interface provided by the service platform is designed

for GE personnel and as such is in English only. There is no
multi-lingual capability built into the Service Interface.

5-4-2-2 Service Login

Click the InSite ExC icon at the bottom of the display screen.
Select Service Desktop in the pop-up screen. It links the user
or the Field Engineer (FE) to the service login screen.

Figure 5-10. Service Desktop

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-21

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-2-3 Access/Security

The service interface has different access and security user

levels. Each user is only granted access to the tools that are
authorized for their use.

Figure 5-11. Service Login Page

NOTE: Online Center access to the scanner requires the password and
they must have “Disruptive” permission and custormer input to
run diagnostics.

Table 5-1: Service Login User Levels

User Level Access Authorization Password

Operator Normally used in-house and protected with a uls

special scanner configuration that is not allowed to
leave the facility.

Administrator Use the OLC access method. uls

External Service Access is protected with a physical media key gogems

(typically a CD-ROM) and a password. The
contents of the media key determine the level of
access and the period of time for which access is
granted.

GE Service Requires a network connection and knowledge of rotating security

the password. password

NOTE: For GE Field Engineer, the password changes at specific

intervals. Access with the password is tied to the service key.
Every access request, whether successful or not, will be logged
into a service access log that is viewable to authorized users.

5-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-2-3 Access/Security(continued)

NOTE: If the following window displays unauthorized access prohibited

after input of correct password to try to login, do the follwings:

Figure 5-12. Unthentication Failure

1. Close the Login window.

2. Press F2 (Config) on the control panel.
3. Enter System-> Setting, Change the Date and Time to the
current.

Figure 5-13. Date and Time

4. Click the InSite ExC icon and try to login again.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-23

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-3 Service Dongle

• This is used when performing “Stop for Maintenance” at
start-up phase to enter the OS (Window XP) for
maintenance or adjustment.
• Insert into the un-used USB port to use it.

Figure 5-14. Service Dongle

• Each key has an unique serial number.

• There is a rotating security password to access. See
5-4-2-3 ‘Access/Security’ on page 5-22 for more
information.

5-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-3-1 Entering Technical Support Mode During Boot-up

1. Plug the service dongle in one of the USB ports.

During boot-up, the system detects the dongle and then
displays the maintenance Access dialog box.

Figure 5-15. Maintenance Access Dialog Box

2. Type the current GE service password in the Password field.

3. Click OK.
NOTE: After you have pressed OK, the Start Application dialog will
be displayed on screen. Be ready to press Maintenance
before the Time Bar is “full“, or the Vivid T8/Vivid T8 Pro
application software will be started. (A description on how to
recover, if you fail to click, Maintenance is included, but you
will spend extra time doing this).

Figure 5-16. Maintenance Dialog Box

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-25

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-3-1 Entering Technical Support Mode During Boot-up(continued)

4. Click the Maintenance button to enter Maintenance Mode.

The Maintenance dialog box is displayed.

Figure 5-17. System halted box

5. Select Exit to Windows to enter Windows desktop.

5-26 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-3-2 Entering Technical Support Mode when the system is Powered on

NOTE: Follow these steps if you want to exit to the Windows Desktop
when the system is active. The Service Dongle must be plugged
in to one of the USB ports.
1. Insert the Service Dongle into a USB port.
2. Go back to the scanning screen and press Ctrl+Alt+R.
3. Select Yes to continue.

Figure 5-18. Maintenance Access

4. If the service dongle is plugged in, type the current GE

Service Password in the password field.

Figure 5-19.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-27

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-3-2 Entering Technical Support Mode when the system is Powered

on(continued)

5. Select MAINTENANCE... to enter maintenance mode. This

will bring up the Maintenance dialog.

Figure 5-20. System halted

6. Select Exit to Windows. This will display the Windows

Desktop on the screen.

Figure 5-21. Maintenance window

5-28 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-3-2 Entering Technical Support Mode when the system is Powered

on(continued)

7. If a Service Key is plugged in, a Maintenance Access dialog

will be displayed on the screen.
If the following error window as below displays after pressing
Ctrl+Alt+Delete, please do the following

Figure 5-22. Error Message 1

a. Select OK and the system will be back to ECHOLADER.

b. Press F2 on the control panel.
c. Select System, change the Date and Time to the
current date.
d. Reboot the system, If a Service Key is plugged in, a
Maintenance Access dialog will be displayed on the
screen.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-29

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-3-2 Entering Technical Support Mode when the system is Powered

on(continued)

If the following error window as below displays after pressing

Ctrl+Alt+Delete, please do the following:

Figure 5-23. Error Message 2

a. Select OK and the system will be back to ECHOLADER.

b. Enter Utility -> System -> General.
c. Select Date/Time.
d. Change the Date/Time to the current date. Select OK
and select Save to save the current date.
e. On the keyboard, press Ctrl+Alt+Delete, select Task
Management.
f. Select File -> New Task (Run...).

Figure 5-24. New Task

5-30 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-3-2 Entering Technical Support Mode when the system is Powered

on(continued)

g. Input regedit in the Create New Task Window and

select Ok.

Figure 5-25. Create New Task

h. Enter Registry Editor and follow the route

HKEY_CURRENT_USER\Software\GEVU\StartLoader\
Params to delete two files LastExitCode and
LastRunTime.

Figure 5-26. Edit Registry

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-31

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-3-2 Entering Technical Support Mode when the system is Powered

on(continued)

i. Reboot the system, If a Service Key is plugged in, a

Maintenance Access dialog will be displayed on the
screen.

5-32 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-4 Service Home Page

When the Service Interface is started, the Service Home Page
appears. The Home Page contains the software revision along
with the hardware inventory and the results of the latest System
Health Information. The navigation bar at the top of the screen
allows the user to select from several tools and utilities.

Figure 5-27. GE Service Home Page

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-33

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-5 Error Logs Tab

From the Error Logs Tab the Log Viewer displays four
categories with pull-down sub-menus and an Exit selection. The
Service Interface allows scanner logs to be viewed by all service
users.
The log entries are color-coded to identify the error level severity
at a glance

Table 5-2: Error Level and Color Code

Severity Error Level Color Code

1 Warning Green

2 Warning Blue

3 Error Red

Figure 5-28. Log Viewer / Logs / Log Entries

5-34 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-5-1 Logs

The nine sub-menus of the Logs category are System,

StartLoader, Informatics, DCVoltage, TxPower, Temperature,
Dicom, Power, Download.
Log table headings for the different logs are as follows:
• System
Log entry headings include Time Stamp: Error Level;
Package; and Message
• StartLoader
Log entry headings include Time Stamp; Error Level;
Package; and Message.
• Informatic
Log entry headings include TimeStamp; Revision; PtID;
PtDOB; PtSex; PtWeight; PtHeight; ExamID;
ExamCategory; ExamCurDate; ExamStartTime;
ExamEndTime; ActiveScanTime; FrezzeTime;
TimeOfImageArchived; AccessionNumber; RefPhyName;
ReadingPhyName; ReadingPhyName; Operator; RoomNo;
BodyPatternSelected; InstitutionName; ActiveModeTime;
CalculationMade; CalculationTime; CalculationMade;
CalculationTime; HelpUdage; ProductName;
SystemSWRev; NoOfSWModules; SystemPowerOnTime;
SystemIdleTime; NoOfBoards; ProbeChangedDate;
ProbeChangedTime; ProbeChangedStatus;
NoOfProbeSlots; NoOfProbes; ProbeID;
ProbeSerialNumber; ActiveExamProbes
• DCVoltage
Log entry headings include Time Stamp; MST D3V3_0;
MST AFE_3V3_0; MST 2V5V_CLK; MST D2V5_0; IOB
AIN1; IOB AIN2; IOB AIN3.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-35

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-5-1 Logs(continued)

• TxPower
Log entry headings include Time Stamp; CPS NSU; CPS
SHVN; CPS HUM0.
• Temperature
Log entry headings include Time Stamp; MST FanSpeed_1;
MST FanSpeed_2; BEP CPU_TEMPERATURE; BEP
CHIPSET_TEMPERATURE; BEP SYS_TEMPERATURE;
MST MVP_TEMPERATURE; MST AFE_TEMPERATURE;
CPS DSV_TEMPERATURE.
• Dicom
Log entry headings include Time Stamp; Error Level;
Package; Message.
• Download
Log entry headings include Time Stamp; Error Level;
Package; Message.
• Network
Log entry headings include Error Level; Package; Message.

5-4-5-2 Utilities

The two sub-menus of the Utilities category are Plot Log and
Plot Page.

Figure 5-29. Utilities Category

• Plot Log
Allows for the color coded plot of all Log contents with the
package on the “x” axis and incident count on the “y” axis.
NOTE: The screen can not display all the log contents. Move up the
screen to display the all the log contents.
• Plot Page
Allows for the color coded plot of all Log contents with the
package on the “x” axis and incident count on the “y” axis.

5-36 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-5-3 Search

On the Text Search sub-menu of the Search category, users

enter case-sensitive text they wish to find. This filter field works
well for filtering the Sys log file for the word “fail”.

Figure 5-30. Search Sub-menu

5-4-5-4 Exit

The sub-menu, Exit Log Viewer, returns the user to the Service
Home Page.

Figure 5-31. Search Sub-menu

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-37

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-6 Diagnostics
Detailed Diagnostic information, 7-5 ‘Global Service User
Interface (GSUI)’ on page 7-16

Figure 5-32. GE Service Diagnostic Page

5-4-6-1 Diagnostics Excecution

Diagnostic tests are executable by both local and remote users.

The Service Platform provides top-level diagnostic selection
based on the user’s level and login access permissions. Remote
access will require disruptive diagnostic permissions to run
Acquisition diagnostics.

5-4-6-2 Diagnostic Reports

Diagnostic tests return a report to the Service Platform. The

platform retains the report and allows for future viewing of the
diagnostic logs.

5-38 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-7 Image Quality

The Image Quality page is intended to contain tools for
troubleshooting image quality issues.

Figure 5-33. Image Quality Page

5-4-8 Calibration
The Calibration page is intended to contain the tools used to
calibrate the system.

Figure 5-34. Calibration Page

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-39

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-9 Configuration
The Configuration page is intended to be used to setup various
configuration files on the system.
The Service Platform is the access and authorization control for
remote access to the configuration subsystem.
The enable/disable of software options can be done from this
Configuration page.

Figure 5-35. Configuration Page

5-40 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Common Service Platform

5-4-10 Utilities
The Utilities page contains several miscellaneous tools.

Figure 5-36. GE Service Utilities Page

NOTE: Select End Exam to permanently save the current patient

information before you select Clean Userdefs in the service
platform.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 5-41

5718825-100 English Rev. 15 System view
Components and Functions (Theory)

5-4-11 Replacement
The Replacement page is intended to contain the tools used to
track replacement parts used in the system.

Figure 5-37. Part Replacement Page

5-4-12 PM
The PM page is intended to contain the tools used in periodic
maintenance of the system.

Figure 5-38. Planned Maintenance Page

5-42 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Chapter 6‘

Service Adjustments

This chapter describes how to test and make

adjustments to the Vivid T8/Vivid T8 Pro. You can use
these to test the system for errors.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 6-1

5718825-100 English Rev. 15 System view
Service Adjustments

6-1 Overview

6-1-1 Contents in this chapter

• 6-1 ‘Overview’ on page 6-2
• 6-2 ‘LCD Monitor adjustments’ on page 6-3

6-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 LCD Monitor adjustments

6-2 LCD Monitor adjustments

6-2-1 Purpose of this section

This section describes how to test and adjust the monitor. These
tests are optional. You may use them to check the system for
errors.

6-2-2 Monitor Adjustments

Please refer to User Manual for how to adjust the LCD Monitor
Position, Brightness and Contrast

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 6-3

5718825-100 English Rev. 15 System view
Service Adjustments

6-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Chapter 7

Diagnostics/Troubleshooting

This chapter describes Vivid T8/Vivid T8 Pro how to

setup and run the tools and software that help maintain
image quality and system operation. Very basic host,
system and board levels are run whenever power is
applied. Some Service Tools may be run at the
application level.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-1

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-1 Overview

7-1-1 Contents in this chapter

• 7-1 ‘Overview’ on page 7-2
• 7-2 ‘Gathering Trouble Data’ on page 7-3
• 7-3 ‘Screen Capture’ on page 7-5
• 7-5 ‘Global Service User Interface (GSUI)’ on page 7-16
• 7-6 ‘Network and Insite II Configuration’ on page 7-33
• 7-7 ‘Troubleshooting’ on page 7-43

7-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Gathering Trouble Data

7-2 Gathering Trouble Data

7-2-1 Overview
There may be a time when it would be advantageous to capture
trouble images and system data (logs) for acquisition to be sent
back to the manufacturer for analysis. There are different
options to acquire this data that would give different results

7-2-2 Collect Vital System Information

The following information is necessary in order to properly
analyze data or images being reported as a malfunction or being
returned to the manufacturer:
Product Name = Vivid T8/Vivid T8 Pro
From the Config (F2) > About screen:
Applications Software
• Software Version
• Software Part Number
System Image Software
• Image Date
• Image Part Number

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-3

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-2-3 Collect a Trouble Image with Logs

If the system should malfunction, press the Alt+D keys
simultaneously. This will collect a screen capture of the image
monitor, system presets and several log files in a date and time
stamped “.zip” file.
NOTE: This function may also be used to make a Print Screen.
This Alt+D function is available at all times.
When Alt+D is pressed, a menu box appears that allows for:
• a place to enter a description od the issue
• a checkbox to indicate a System lockup
• a chioce to Export a pre-formateed CD-R/DVD-R or save to
the Export directory D: drive (for remote viewing through
InSite)

Figure 7-1. Alt+D Dialog Box

7-2-3-1 Advanced log options

• Extensive Log enables the creation of a log file containing

addtional information for the selected functionality.
• Options enables creation of a log file based on a selected
bookmark or for a user configurable time frame. Different
type of information can be selected to be part of the log file.

7-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Screen Capture

7-3 Screen Capture

7-3-1 Capturing a screen with P2 Key

There may be times when the customer or field engineer will
want to capture a presentation on the screen. This is
accomplished by first saving the image(s) to the clipboard using
a Print Key.
Check the function of the P2 Key in the event that the customer
may have made some custom settings.
1. Press F2 on the Control Panel.
2. Select Connectivity from the Utilities Menu.
3. Select the Addtional Outputs tab on the Connectivity
screen.
4. In the Button field, select P2.
If P2 is not set to Whole Screen, proceed to step 5 to record
the customer’s customized settings.

Figure 7-2. Connectivity/Button screen

5. In the Destinations section, record the service that is

displayed.
6. In the Button section, record the parameters related to the
service.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-5

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-3-1-1 Setting the P2 Key to Screen Capture

If the P2 Key is not set to screen capture:

1. While on the Connectivity screen, with the Buttons tab
displayed, go to the Destinations list.
2. From the list select Store to clipboard. Press [>>] to add
the selection to the Selected devices section.
3. Ensure that the Button section for Image frames is set to
Whole Screen, secondary Capture and No Image
Compression.
4. The P2 Key should now be set up for whole screen capture,
sending the screens to the image buffer (clipboard).

7-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Screen Capture

7-3-1-2 Capturing a Screen

The following is a generic process to capture any screen from

the scanner:
1. Navigate to and display the image/screen to be captured.
2. Press P2. This will place a snapshot of the screen on the
“clipboard” displayed at the bottom of the scan image
display.

Figure 7-3. Select Image to Capture

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-7

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-3-1-2 Capturing a Screen(continued)

3. Select and highlight the snapshot to be stored.

4. Press Update/Menu key on the control panel and the
system menu is displayed. Select Save as.

Figure 7-4. Menu > Save As

5. A Save dialog box will be opened. Choose the archive

___location to save image on the USB Drive or CD/DVD.

Figure 7-5. Save Dialog Box

NOTE: It is better to save the image in Jpeg format. Image of this

format can be easily reviewed in the computer.

7-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Screen Capture

7-3-1-3 Reset the P2 Key to Customer’s Functionality

If the customer had programmed the P2 Key to a function other

than screen capture, restore that functionality recorded in
section 7-3-1-1 ‘Setting the P2 Key to Screen Capture’ on
page 7-6. Refer to Figure 7-2 on page 7-5.
1. Seclect Config (F2) on the control panel.
2. Select Connectivity -> Additional Outputs.
3. In the Button field, select Print2.
4. In the Destinations list, select the service(s) recorded in step
5, See 7-3-1-1 ‘Setting the P2 Key to Screen Capture’ on
page 7-6.
5. In the Physical Print Buttons section, select the parameters
related to the service recorded in step 6, see
7-3-1-1 ‘Setting the P2 Key to Screen Capture’ on page 7-6.

7-3-1-4 Capturing a Screen with Service Dongle

The following is a generic process to capture the whole screen

(including the Touch Panel screen) from the scanner:
1. Insert the Service Ddongle in the system’s USB port.
2. Press Prt key on the control panel, the whole screen is
captured.
3. Press Ctrl+Alt+Delete, the Windows Security dialog is
displayed. Then select Task Manager.

Figure 7-6. Windows Security

NOTE: It is also avaialble to Exit to Windows and save the image on

the system or removal media. Fro how to Exit to Windows,
please refer to 5-4-3-2 ‘Entering Technical Support Mode
when the system is Powered on’ on page 5-27.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-9

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-3-1-4 Capturing a Screen with Service Dongle(continued)

4. In Windows Task Manager, select File-> New Task

(Run...).

Figure 7-7. Windows Task Manager

5. Type in the program name: mspaint.

Figure 7-8. Create New Task

7-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Screen Capture

7-3-1-4 Capturing a Screen with Service Dongle(continued)

6. The paint screen is displayed, press Ctrl+V to paste the

captured screen. And then save the image in the
appropriate destination.

Figure 7-9. Save Image

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-11

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-3-2 Capturing a Screen with Prt Key (for R2.x.x only)

There is another much easier way to capture a screen for
R2.x.x.
1. Just press Prt key on the keyboard to capture the
presentation on the screen.

Figure 7-10. Prt Key on the keyboard

2. Select the desired destination you want to save the image.

USB memory stick is also applicable for this function.

Figure 7-11. Select destination

7-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System Warning/Error and Logs

7-4 System Warning/Error and Logs

7-4-1 Temperature warning

Figure 7-12. Temperature Warning

• Cause: CPU temperature exceeds threshold (95 degrees)

• What to do: shut down the system and clean the filter.

7-4-2 Temperature exceeds threshold

Figure 7-13. Temperature exceeds threshold

• Cause: CPU temperature exceeds threshold (100 degrees)

and therefore, system must be shutdown immediately.
• What to do: shut down the system and clean the filter.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-13

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-4-3 System voltage failure

Figure 7-14. System voltage failure

• Cause: Hardware and/ir voltage error detected.

• What to do
1. Press OK and reboot the system.
2. if the problem persists, shut down the system, turn OFF the
cuicuit breaker and then reboot the system.

7-4-4 Hardware configuration error

Figure 7-15. Hardware configuration error

• Cause: Hardware(s) is not detected as valid system.

System is able to boot up but not able for scanning.
• What to do
1. Press OK and reboot the system.
2. If the problem persists, shut down the system, turn OFF the
cuicuit breaker and then reboot the system.

7-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System Warning/Error and Logs

7-4-5 System error

Figure 7-16. System error

• Cause: Hardware(s) is not detected as valid system.

System is able to boot up but not able for scanning.
• What to do
1. Press OK, turn off the system and then reboot it.
2. If the problem persists, shut down the system.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-15

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-5 Global Service User Interface

(GSUI)

7-5-1 Enter global service user interface

1. Click the icon in the status bar at the bottom of the
display screen. This icon links the user or the Field Engineer
(FE) to the service login screen.
2. Select GE Service in option of User Level of GEMS Service
Home page and input correct password, press OK button.

Figure 7-17. Service Login Page

7-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Global Service User Interface (GSUI)

7-5-1 Enter global service user interface(continued)

3. Choose Diagnostic in Global Service Interface to active
diagnostic functions, choose options to activate various
functions correspondingly.

Figure 7-18. Active Diagnostic Function

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-17

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-5-2 Control Frame

Contains the user interface elements used for:
• Diagnostic control, and
• Operator feedback

7-5-2-1 Button

This button has two modes each with appropriate text:

• Execute - to start the diagnostic, and
• Abort - to stop a diagnostic
The button can also be disabled.

7-5-2-2 Loop Count

This is an editable text field that will only accept numeric values
with 4 digits or less. When the button is configured as an
“execute” button and pressed, the loop count field will be
queried to determine the number of times to execute the
diagnostic.

7-5-2-3 Progress Indicator

Displays a graphical progress indication to the user.

7-5-2-4 Short Text Message

Displays either a starting message or aborting message, as well

as the diagnostic completion status.

7-5-2-5 Background Color

Initially gray, the Control Frame background color changes upon

completion of a diagnostic to indicate completion status.
• Fail = Red
• Pass = Green
• Neither pass nor fail = Set back to Gray (for example, final
code status is Aborted).

7-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Global Service User Interface (GSUI)

7-5-3 Common Diagnostics

7-5-3-1 Utilities

Provides two selections:

• Disruptive Mode
Allows you to enable or disable disruptive mode
troubleshooting.
• System Shutdown
Allows for system shutdown from the diagnostic menu.
Select to Restart System or Shutdown System. Also, select
to retain Disruptive Mode or Not.
After submitting to restart or shutdown a confirmation
screen gives one last chance to confirm or cancel the
request.

7-5-3-2 Virtual Dongle

Virtual Dongle is a feature designed to enable OLE’s access to

customer’s desktop remotely, service engineers don’t have to be
on site to connect the physical dongle to exit to desktop, it’s
doable remotely by using this feature.
NOTE: Virtual dongle is only available if the user login as GE Service.
1. In the server side, select the system which the OLE would
remotely connect to, and select Connect to device.

Figure 7-19. Connect to device

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-19

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-5-3-2 Virtual Dongle(continued)

2. Select Connect. Then the OLE is remotely connected to the

system.

Figure 7-20. Remotely Connect

3. Enter Utility-> Common Utilities-> Disruptive Mode,

select Enable Virtual Dongle, and then select Yes.

Figure 7-21. Enable Virtual Dongle

7-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Global Service User Interface (GSUI)

7-5-3-2 Virtual Dongle(continued)

4. Go back to the scanning screen and press Ctrl+Alt+R.

5. Select Yes to continue.

Figure 7-22. Maintenance Access

6. Select MAINTENANCE... to enter maintenance mode. This

will bring up the Maintenance dialog.

Figure 7-23. System halted

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-21

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-5-3-2 Virtual Dongle(continued)

7. Select Exit to Windows. This will display the Windows

Desktop on the screen.

Figure 7-24. Maintenance window

NOTE: For R2.x.x, you need to repeat all the steps above after you
restart the system if you want to activate virtual dongle.

7-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Global Service User Interface (GSUI)

7-5-3-3 Service Diagnostics

BF, COMEXP and GFS modules are on the Vivid T8/Vivid T8

Pro WMST PWA.
CPS is WPWR/DCDC PWA.
IOS is SMIO PWA.
PID is SLRY 4-Probe PWA.

7-5-3-3-1 GFS
• GFS Swept Demodulator Test performs a signal path test of
the swept demodulator FPGA on the GFS.
• GFS Front-End Interface Test tests that the GFS can access
Front-End boards.
• GFS Analog Test.
• GFS Memory Access Test tests that GFS can access to the
internal, external, external cache memory spaces.
• Front End Interface FPGA Test reads the version of the GFE
FPGA.
• GFS Fixed Demo Test: GFS Fixed Demodulator signal path
test.
• DSP Master Clock Test tests DSP Master Clock.
• GFS Swept Demodulator Long Test.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-23

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-5-3-3 Service Diagnostics(continued)

7-5-3-3-2 System
• CPU Temperature Test.
• CPS Temperature Test.
• WMST Temperature Test.
• WMST Voltage Test.
• CPS Voltage Test.
• FPGA Version Test.
• HV_STOP Test tests HV-STOP mechanism and checks
each board is able to assert HV_STOP using its HV_STOP
source.

7-5-3-3-3 Memory
• Callisto Memory Test.
NOTE: The Callisto Memory test may fail if it is performed with other
tests at the same time.

7-5-3-3-4 AnalogReceive
• Noise Floor Test.

7-5-3-3-5 AnalogCW
• aCW IQ Symmetry Test

7-5-3-3-6 Digital Receive

• AFE IF Test
• Complex Mixer Test
• CE Decoder Test

7-5-3-3-7 ECG Tests

• ECG Tests

7-5-3-3-8 Doppler Tests

• Doppler Audio Test runs the tests for Doppler.

7-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Global Service User Interface (GSUI)

7-5-3-3 Service Diagnostics(continued)

7-5-3-3-9 PC
• Essential Test tests: PCI, PCI Express, CPU, Memory, HD
Disk and Video.
• Hard Drive Long tests functionality of the hard drive.
• Hard Drive Short tests functionality of the hard drive.
• Memory tests the memory on the mother board.
• Network Adapter: Network calbe must be connected.
• System board tests the real time clock.
• Video tests functionality of video adapters.

7-5-3-3-10 PC Interactive
• AVI playback tests playing back an AVI file.
• Click “Play” to run the test. If the test is successful, you
will see a brief video clipo with audio. For more
information about the test, click “More Information”.
• Click “Pass” if the test successfully reproduces the
video clip.
• Click “Fail” if the test is unable to successfully reproduce
the video clip.
• Click “Cancel” button to quit the test without recording a
test result.
• Keyboard
• Press each key on the keyboard and it will be added to
the History. Hold down a key to test the repeat of that
key. To cancel, click Cancel or press Alt-X.
• Special purpose keys like volume control or Internet
access keys may not be detected. To test the Fn key of
a notebook computer, hold down the Fn key while
pressing another key.
• Note: This diagnostic is intended to verify keyboard
keys are in good working order. It is not intended to
veriy that keyboards produce desired characters.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-25

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-5-3-3 Service Diagnostics(continued)

• Monitor Test Patterns

• This test is composed of various elements that verify a
monitor functions correctly. To test a monitor feature,
click the appropriate button. You can return to this dalog
by clicking the mouse button or pressing any key.
• The Combination Test helps you verify your monitor is
properly aligned, and set at the correct color depth and
resolution. Use the crosshair pattern in each corner of
the screen to visually determine if the monitor aligns
correctly. If the crosshairs appear distored or out of
focus, a problem may exist with the monitor alignment.
Use the color spectrum array for visually verifying the
monitor color depth capacity. If the colors in the color
spectrum do no blend smoothly together, a problem
may exist with the monitor color depth. Use the
graduated horizontal and vertical alignment bars to
determine the monitor resolution capabilities. The better
you can discern individual lines as they move closer
together, the higher the resolution capabilities of the
monitor.
• The Solid Color Test helps point out malfunctioning or
dysfunctional pixels using five basic colors: red, green,
blue, black, and white. Fill the screen with an
appropriate color by clicking the associated button. If a
pixedl is malfunctioning, the pixel color will contrast with
the color of all other pixels.
• The VESA Test Patterns allow you to test the monitor for
proper luminance, geometry and focus. Click the
appropriate button to fill the screen with the associated
test pattern. You can return to this dalog by clicking the
mouse button or pressing any key.

7-26 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Global Service User Interface (GSUI)

7-5-3-3 Service Diagnostics(continued)

• Trackball
• The Mouse Status Test verifies the cursor position and
mouse button state. When a mouse button is pressed,
the corresponding button on the picture will change
color. If the mouse is a wheel or scroll mouse, an arrow
will indcate the direction the wheel is being rotated.
Clicking the wheel will flash the picture of the mouse in
the Mouse Status Test area.
• The Drag and Drop Test verifies a mouse can
successfully perform drag and drop operations. Left
click the picture of the CD and drag is onto the picture of
the drive. If successful, the picture will change.
• The Double Click Test verifies a mouse can successfully
perform double-click operations. Double-click on the
picture of the monitor. If successful, the picture will
change.
• Sound Test generates sounds for testing the speakers.
• USB Ports Test lists USB Devices.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-27

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-5-3-3 Service Diagnostics(continued)

7-5-3-3-11 Assessment Utility

Probe Assessment
NOTE: The probe assessment is only available for the probe connected
in the first probe port.

Figure 7-25. The first probe port

NOTE: P2D probe is not supported in Probe Assessment.

1. Place the probe’s carrying case on a stable surface and
open the case.
2. Carefully remove the probe and unwrap the probe cord.
3. Put the probe in the probe holder.

CAUTION DO NOT allow the probe head to hang free. Impact to the
probe head could result in irreparable damage.

4. Prior to inserting the probe, ensure that the connector

locking handle is positioned to the left.
5. Align the connector with the probe port and carefully push
into the left-most probe port.
6. Turn the connector locking handle to the right to secure the
probe connector.
7. Carefully position the probe cord so it is free to move and is
not resting on the floor.
8. Press Probe button on the control panel and select the first
probe from the probe indicators.
9. Enter global service user interface as GE service.

7-28 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Global Service User Interface (GSUI)

7-5-3-3 Service Diagnostics(continued)

10. In the Diagnostic-> Service Diagnostics-> Assessment

Utility-> Probe Assessment to check the probe.
If there is no broken element and the probe is acceptable for
diagnostic, the following result window displays.

Figure 7-26. Probe Assessment Pass

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-29

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-5-3-3 Service Diagnostics(continued)

If there are broken elements and the probe is not acceptable

for diagnostic. The assessment is fail and the failed
elements are shown in the graphic.

Figure 7-27. Probe Assessment Fail

CAUTION Reboot the system after the probe assessment.

7-30 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Global Service User Interface (GSUI)

7-5-3-3-12 Probe Pass/Fail Criteria

Pass
• No dead element
• Dead elements on the edge (#0, #1 or #end-1, #end)
Fail
• Max 2 weak elemets on the scan line: -3dB<elements<-2dB
• Any one of the elements in one scan line: element<-3dB

7-5-3-4 Pedof CW Transmit and Receive

• TX RX CW Chain Test CW Hi: Tests CW Doppler signal path

using HVB transmit power supply.
CWD Loopback connector must be connected.
• TX RX CW Chain Test CW Lo: Tests CW Doppler signal
path using HVB transmit power supply.
CWD Loopback connector must be connected.

7-5-3-5 Transmit

• GeckoScope

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-31

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-5-3-6 OP Panel Interface

Figure 7-28. OP Panel Test

7-5-3-7 Restart the system after diagnostics

Always shutdown the system and reboot after a

diagnostics session.

7-32 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Network and Insite II Configuration

7-6 Network and Insite II

Configuration

7-6-1 Network Configuration

7-6-1-1 Wire-LAN Network

1. Connect system with network.

2. Enter F2-> Connectivity-> TCP/IP, select Network
Settings.

Figure 7-29. Network Settings

3. Select Local Area Connection.

Figure 7-30. Network Conection

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-33

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-6-1 Network Configuration(continued)

4. Select Properties in the Local Area Connection Status

window.

Figure 7-31. Connection Status

5. Select Internet Protocol (TCP/IP) from the terms, and then

select Properties.

Figure 7-32. TCP/IP Protocol

7-34 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Network and Insite II Configuration

7-6-1 Network Configuration(continued)

6. Select Obtain an IP address automatically and Obtain

DNS server address automatically, and then select OK.
NOTE: If user wants to setup static IP address, input static address
in IP-Address box, Subnet Mask and Default Gateway
box.

Figure 7-33. IP Address

7. The network icon at the bottom of the the screen displays as

connected.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-35

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-6-1-2 Wireless-LAN Network

NOTE: To configure the Wireless-LAN network, the operator must login

as administrator.
1. Connect the wireless adapter in the USB port.
2. Enter Config (F2)-> Connectivity-> TCP/IP, select
Network Settings.

Figure 7-34. Network Settings

3. Double click Wireless network Connection.

Figure 7-35. Wireless Network Conection

7-36 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Network and Insite II Configuration

7-6-1 Network Configuration(continued)

4. Select Properties in the Wireless Network Connection

Status window.

Figure 7-36. Connection Status

5. Choose an available wireless network and select Connect.

Figure 7-37. Available Network

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-37

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-6-1 Network Configuration(continued)

6. Input the network key if required.

Figure 7-38. Input key

7. The network status is displayed as connected and the

system is connected to the network via Wireless-LAN.

Figure 7-39. Wireless-LAN Connection

7-38 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Network and Insite II Configuration

7-6-2 Insite II Configuration

1. Enter global service user interface, and log in as GE
Service. See 7-5-1 ‘Enter global service user interface’ on
page 7-16 for more information.
2. On Configuration page, choose Product as server type in
Advanced Configuration as server type and select SAVE.

Figure 7-40. Server Type Configuration (out of GE network)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-39

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-6-2 Insite II Configuration(continued)

3. Enter Proxy Server Address as 3.20.128.6 and Proxy
Server Port as 88 in Proxy_Configuration, then press
Submit Changes.

Figure 7-41. Proxy Configuration

7-40 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Network and Insite II Configuration

7-6-2 Insite II Configuration(continued)

4. Go to Diagnostics-> Common Diagnostics ->Untility
page. Enable Disruptive Mode at Service side by selecting
Yes.

Figure 7-42. Enable Disruptive Mode

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-41

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-6-2 Insite II Configuration(continued)

5. Customer will receive a request of Service side, select Yes
to accept.
6. Service can do Remote Diagnostics successfully.

Figure 7-43. Remote Diagnostic Successful

7. Press Power On/Off Switch, and choose Shutdown to

shutdown the system and then restart the system.

7-42 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Troubleshooting

7-7 Troubleshooting
7-7-1 Console Troubleshooting Trees
7-7-1-1 System Doesn’t Boot

This is an overall diagram showing a recommended sequence

for troubleshooting a no-boot situation.
NOTE: This troubleshooting tip is for online engineer.

Figure 7-44. System Doesn’t Boot

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-43

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-7-1-2 The trackball is low sensitive

Figure 7-45. Trackball Low Sensitive

7-44 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Troubleshooting

7-7-1-3 Noise Issue

Figure 7-46. Noise Issue

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-45

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-7-1-4 Trackball - Impaired Sensitivity

Figure 7-47. Trackball - Impaired Sensitivity

7-46 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Troubleshooting

7-7-1-5 Printer Malfunction

Figure 7-48. Printer Malfunction

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-47

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-7-2 Monitor Troubleshooting

Table 7-1:

Fault Symptom Check Item

No image Check the power cord is properly connected.

Check the video cable is properly connected.

Check no pins of the video cable are bent.

Check if video present on backplane.

Check if the signal resolution is out of range.

Color is not uniform Replace the monitor.

Colored streaks appear in Check for presence of magnetic sources near the monitor.
image Eliminate the sources and then degauss the monitor.

Picture is fuzzy Adjust the picture contrast and picture brightness.

Some SVGA cards having an excessive video output level will cause a
fuzzy picture at the maximum contrast leve.

Check if the signal resolution is correct.

Video test patterns are not Replace the monitor.

clear, bright, parallel or
suqare

7-48 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Troubleshooting

7-7-3 Network Troubleshooting Tress

7-7-3-1 No Connection to the Network at All

1. Check if the LCD indicates the network connection is

working in normal status.
2. Check that the network cable between the scanner and the
wall network is connected and well seated in both ends.
3. Try a Ethernet crossover cable that is known to be OK.
NOTE: A Ethernet crossover Cable must be used instead of a
normal network cable here.
4. Connect a Ethernet crossover cable between the Scanner
and your PC. Try to ping from the scanner to the ip address
on the PC. If ok, the hardware connection inside the
scanner is OK.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-49

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-7-4 Rewrite the Serial Number

WARNING Make sure the service dongle is disconnected before powering

on the system, or it may cause the problem connecting Local
Archive.

Table 7-2: The scenarios of rewriting the serial number

Impact to system serial Impact to software option

Scenario numbers keys

Only replace with a new MST System still can recognize the System still can recognize the
board. Keep using the existing serial numbers stored in the HDD. software option keys stored in
HDD without any software reload User no need take any action. the HDD. User no need take
or re-install. any action.

Replace with a new MST board. No serial number in MST or HDD. All existing software option keys
Replace with a new HDD, or use System will ask for serial number are lost. User need re-enter the
existing HDD but have software when first power on. User need software option keys.
reload or re-install to full disk. enter the correct serial numbers.

Replace with a new MST board. System still can recognize the System still can recognize the
Use existing HDD but have serial numbers stored in the HDD. software option keys stored in
software reload or re-install to C User no need take any action. the HDD. User no need take
disk only. any action.

Replace with a new CPU System still can recognize the System still can recognize the
module. serial numbers stored in the HDD. software option keys stored in
User no need take any action. the HDD. Please remember to
set the correct system time.
Some DEMO keys will expire if
date is incorrect.

Replace with another MST board The system serial number stored The software options keys
(with SN inside). Keep using the in MST board is different with the stored in HDD will be invalid
existing HDD. No software reload one in HDD. User need enter the since system serial number
or re-install. correct serial numbers. change. User need enter the
new software option keys which
match with the serial number in
the MST board.

7-50 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Troubleshooting

7-7-4 Rewrite the Serial Number(continued)

NOTE: The system may reboot once or twice before the following
window shows up, wait until the system is up and then input the
correct serial number.
NOTE: If no serial number in MST or HDD, system will ask for serial
number when first power on. Please follow the procedures
below to rewrite the serial numbers.
1. Input the correct Serial number, select OK.
NOTE: The serial number is case sensitivity.

Figure 7-49. Input Serial Number

NOTE: The serial number can be found on the rating plate on the
rear side of the system.

Figure 7-50. Rating Plate

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-51

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-7-4 Rewrite the Serial Number(continued)

2. The serial number is reset, reboot the system.

Figure 7-51. Reboot the System

NOTE: Make sure the system is shut down after the serial number
is reset.
3. Power on the system, input the option keys if the dialog
displays.

Figure 7-52. Input Option Key

7-52 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Troubleshooting

7-7-4 Rewrite the Serial Number(continued)

4. After the system is powered on, press Patient on the control
panel and confirm the Dataflow can be selected as Local
Archive.

Figure 7-53. Patient Screen

WARNING If you rewrite the serial number after the system exits to
Windows with service dongle or the data is failed to save on
Local Archive, please follow the steps below:
1. Delete serialno.txt in D Disk.
2. Disconnect the service dongle and then reboot the system.
3. Follow the steps on page 7-50 to rewrite the Serial number
again.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-53

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-7-4 Rewrite the Serial Number(continued)

If the system serial number stored in MST board is different with
the one in HDD, please follow the procedures below to rewrite
the serial numbers.
1. If the serial number on VPD and HDD does not match, the
following dialog will display when the system is booting up.
On the system with software version R1.0.4 and above, the
password can be either engineering dongle password or
service dongle password.
On the system with software version R1.0.2 and R1.0.3, the
password is same as the engineering dongle password,
please contact with online center for support.

Figure 7-54. Input Password (For R1.x.x only)

2. For software R2.x.x, it is NOT required to input the

password. Enter windows with dongle, go to d:\ disk, delete
[serialno.txt] file.
3. Go to C:\GEHC\Factory\target\bin64\Release, find the
VpdEdit.exe and run it by double click it.

7-54 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Troubleshooting

7-7-4 Rewrite the Serial Number(continued)

4. Run the VpdEdit.exe, and then select the COMEXP device,
and find the line29 SSN.

5. Change the value to “-1”, and then click [Write All] button.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 7-55

5718825-100 English Rev. 15 System view
Diagnostics/Troubleshooting

7-7-4 Rewrite the Serial Number(continued)

6. Close the VpdEdit.exe, reboot the system, will hint the user
to write SN like below.

7. Input the correct SN. The system will restart, and then input
the option key.

7-56 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Chapter 8

Replacement Procedures

This chapter describes how to remove and install, or

replace, modules and subsystems in the Vivid T8/Vivid
T8 Pro. It also includes instructions for installing and
re-installing the software.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-1

5718825-100 English Rev. 15 System view
Replacement Procedures

8-1 Overview

8-1-1 Contents in this chapter

• 8-1 ‘Overview’ on page 8-2
• 8-2 ‘Warnings and important information’ on page 8-3
• 8-3 ‘Disassembly/Re-assembly’ on page 8-5
• 8-11 ‘Loading the software’ on page 8-178
• 8-13 ‘Check after FRU Replacement’ on page 8-233
• 8-14 ‘Used Media and Used Parts Disposal’ on page 8-239

8-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Warnings and important information

8-2 Warnings and important

information

8-2-1 Warnings

WARNING Energy Control and Power Lockout for Vivid T8/Vivid T8 Pro.
When servicing parts of the Ultrasound system where there is
exposure to voltage greater than 30 volts:
1. Follow LOCK OUT/TAG OUT procedures.
2. Turn off the breaker.
3. Unplug the Ultrasound system.
4. Maintain control of the Ultrasound system power plug.
5. Wait for at least 30 seconds for capacitors to discharge as
there are no test points to verify isolation.
6. Remove/disconnect the battery, if present.
Ultrasound System components may be energized.

WARNING Because of the limited access to cabinets and equipment in the

field, placing people in awkward positions, GE has limited the
lifting weight for one person in the field to 16 KG (35 LBS).
Anything over 16 KG (35 LBS) requires 2 people.

WARNING DO NOT touch any boards with integrated circuits prior to

taking the necessary ESD precautions.
Always connect yourself, via an arm-wrist strap, to the advised
ESD connection point located on the rear of the Ultrasound
system (near the power connector).
Follow general guidelines for handling of electrostatic sensitive
equipment.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-3

5718825-100 English Rev. 15 System view
Replacement Procedures

8-2-1 Warnings(continued)
NOTE: Use an ESD compatible work space or the ESD-kit during parts
replacement.

WARNING The waste of electrical and electronic equipment must not be

disposed as unsorted municipal waste and must be collected
separately.
Please contact the manufacturer or other authorized disposal
company to decommission your equipment.

8-2-2 Returning/shipping probes and repair parts

Equipment being returned must be clean and free of blood and
other infectious substances.
GE policy states that body fluids must be properly removed from
any part or equipment prior to shipment. GE employees, as well
as customers, are responsible for ensuring that parts/equipment
have been properly decontaminated prior to shipment. Under no
circumstance should a part or equipment with visible body fluids
be taken or shipped from a clinic or site (for example, body coils
or an ultrasound probe). The purpose of the regulation is to
protect employees in the transportation industry, as well as the
people who will receive or open this package.
NOTE: The US Department of Transportation (DOT) has ruled that
“items that were saturated and/or dripping with human blood
that are now caked with dried blood; or which were used or
intended for use in patient care” are “regulated medical waste”
for transportation purposes and must be transported as a
hazardous material.

8-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Disassembly/Re-assembly

8-3 Disassembly/Re-assembly

8-3-1 Warning and Caution

WARNING ONLY QUALIFIED SERVICE PERSONNEL SHOULD

REMOVE ANY COVERS OR PANELS. ELECTRICAL
HAZARDS EXISTS AT SEVERAL POINTS INSIDE.
BECOME THOROUGHLY FAMILIAR WITH ALL
HAZARDOUS VOLTAGES AND HIGH CURRENT
LEVELS TO AVOID ACCIDENTAL CONTACT

CAUTION Do not wear the ESD wrist strap when you work on live circuits
and more than 30V peak is present.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-5

5718825-100 English Rev. 15 System view
Replacement Procedures

8-3-2 Tools needed for servicing Vivid T8/Vivid T8 Pro

Table 8-1: Standard tools list for Vivid T8/Vivid T8 Pro

Part
No Name Part No. QTY Screw Description Screwdriver Description

1 screw 2159632 2 Screw BH M4x6 Common Phillips Screwdriver

2 screw 2159634 4 Screw BH M4x10 WHT Common Phillips Screwdriver

3 screw 2327793 135 D2 Screw SJ2836-87 Common Phillips Screwdriver

M3x8

4 screw 2373562 3 Screw M4x10 Common Phillips Screwdriver

5 screw 5138465 10 Screw FH M2.5x5(NL) Common Phillips Screwdriver

6 screw 5176890 6 Screw DIN965A M4x8 Small Phillips Screwdriver

7 screw 5244775 2 Screw GB T820-2000 Common Phillips Screwdriver

M3x8

8 screw 5342274 4 Inch SScrew #6-32UNC Common Phillips Screwdriver

9 screw 5439265 246 Screw-M4x10 Common Phillips Screwdriver

10 screw 5445720 12 GB 818-2000 M4x30 Common Phillips Screwdriver

11 screw 2337572 2 Screw FH M3x6 Common Phillips Screwdriver

12 screw 5476381 20 Bolt M8x18 with Washer 6# Inner Hexangular Set

13 screw 5476387 34 Bolt M6x15 with Washer 5# Inner Hexangular Set

14 screw 5476394 5 Bolt M8x30 6# Inner Hexangular Set

15 screw 5476438 14 Bolt M8x36 With Washer 6# Inner Hexangular Set

16 screw 5476440 17 Bolt M6x24 With Washer 5# Inner Hexangular Set

17 screw 5477579 2 Screw_DIN912 M6_20 5# Inner Hexangular Set

18 screw 5490719 4 Screw PM SW4x8 Common Phillips Screwdriver

19 screw 5491747 1 Screw Pan Head M4x4 Common Phillips Screwdriver

20 screw 5491847 2 Hand Screw M2p5x5 by hand

NOTE: Please use the correct Screwdrivers listed in Table 8-1

8-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Disassembly/Re-assembly

8-3-3 Overview of Vivid T8/Vivid T8 Pro

Vivid T8/Vivid T8 Pro 19”

LCD Assy 1280 x 1024

R1 Touch Panel

Vivid T8/Vivid T8 Pro R1/

R2 Speaker

R1 KBD Top Assy

R1/R2 SUSB PWA-USB

Board

Vivid T8/Vivid T8 Pro R1/

R2 Printer shelf option kit

Vivid T8/Vivid T8 Pro R1/

R2 Base

Figure 8-1. System Overview (1)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-7

5718825-100 English Rev. 15 System view
Replacement Procedures

8-3-3 Overview of Vivid T8/Vivid T8 Pro(continued)

R1/R2 Flexible ARM

R1/R2 Rear Handle

R1/R2 Gel Holder

R1/R2 Probe holder kit

Probe connector ports

Figure 8-2. System Overview (2)

8-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Disassembly/Re-assembly

8-3-3 Overview of Vivid T8/Vivid T8 Pro(continued)

Probe cable hook

Paper Tray

Rear Panel

Cable Tray

Figure 8-3. System Overview (3)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-9

5718825-100 English Rev. 15 System view
Replacement Procedures

8-3-3 Overview of Vivid T8/Vivid T8 Pro(continued)

Figure 8-4. R1.x.x peripheral panel

1. USB Printer port: For AC Printer ONLY. 6. S-Video out port

2. VGA Video out port 7. Composite out port
3. USB 2.0 ports 8. Equipotentiality
4. Ethernet 9. Circuit breaker
5. Audio Out port 10. AC Inlet

8-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Disassembly/Re-assembly

8-3-3 Overview of Vivid T8/Vivid T8 Pro(continued)

Figure 8-5. R2.x.x peripheral panel

1. USB Printer port: For AC Printer ONLY. 6. Equipotentiality

2. VGA Video out port 7. Circuit breaker
3. USB 2.0 ports 8. AC Inlet
4. Ethernet
5. Audio Out port

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-11

5718825-100 English Rev. 15 System view
Replacement Procedures

8-3-4 Part Disassembly List

Table 8-2: LCD Assy Disassembly List

Part Description Page Number

LCD Panel Assy 8-14

Table 8-3: Keyboard Assy Disassembly List

Part Description Page Number

Touch Panel 8-22

Speaker 8-26

KBD Top Assy 8-29

SUSB PWA-USB Board 8-32

Internal ECG Cable 8-35

ECG Board 8-38

Trackball 8-41

Power and Freeze button with cable kit 8-43

AN Keyboard 8-46

Main Keyboard PWA 8-48

KBD Top Cover 8-51

Rear Handle 8-53

Arm Support Kit 8-58

KBD Bottom 8-73

Table 8-4: Body Assy Disassembly List

Part Description Page Number

Body Front Cover 8-77

Body Back Cover 8-78

Body Left Cover 8-80

Body Right Cover 8-82

Body Top Cover 8-84

Body Neck 8-86

Internal Box Assy 8-88

Hardisk Assy 8-93

8-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Disassembly/Re-assembly

Table 8-4: Body Assy Disassembly List

Part Description Page Number

ACDC Module 8-100

I/O Board PWA 8-103

WPWR PWA 8-112

CPU Assy 8-119

WMST PWA 8-130

Relay Assy 8-135

CWD PWA 8-137

Fan Assy with cable 8-139

Table 8-5: Base Assy Disassembly List

Part Description Page Number

Footrest Cover 8-148

Castor 8-150

Base 8-153

Table 8-6: Cable Kit Disassembly List

Part Description Page Number

LCD cable kit 8-157

One box cable kit 8-161

One Box to KBD cable kit 8-165

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-13

5718825-100 English Rev. 15 System view
Replacement Procedures

8-4 LCD Assy

Table 8-7: LCD Assy Disassembly List

Part Description Page Number

LCD Panel Assy 8-14

8-4-1 LCD Panel Assy

Purpose: This is a description on how to remove and replace the
LCD Panel Assy.

8-4-1-1 Pinch Point

When you adjust LCD position, pay attention to the pinch point
between the LCD and touch panel in case of any hurt of your
hand.

Figure 8-6. Pinch point

8-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 LCD Assy

8-4-1-2 Tools

• Common Phillips screwdrivers

• 4mm inner Hexangular Set

8-4-1-3 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-4-1-4 Needed Manpower

• 1 person, 10 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-15

5718825-100 English Rev. 15 System view
Replacement Procedures

8-4-1 LCD Panel Assy(continued)

8-4-1-5 Removal Procedure

Table 8-8: Removal Procedure for LCD Panel Assy

Step Description Corresponding Graphic

1. Use 2 hands to remove LCD back

cover. (for R1.x.x)

Use 2 hands to remove LCD back

cover. (for R2.x.x)

2. Unscrew 2 screws and disconnect

the power cable and HDMI cable.
(for R1.x.x)

8-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 LCD Assy

Table 8-8: Removal Procedure for LCD Panel Assy

Step Description Corresponding Graphic

Unscrew 2 screws and disconnect

the power cable and HDMI cable.
(for R2.x.x)

3. Unscrew 2 screws that fix the LCD

monitor. (for R1.x.x)

Unscrew 2 screws that fix the LCD

monitor. (for R2.x.x)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-17

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-8: Removal Procedure for LCD Panel Assy

Step Description Corresponding Graphic

4. Keep the LCD monitor at the

vertical position, and loose the two
screws. (for R1.x.x)

Keep the LCD monitor at the

vertical position, and loose the two
screws. (for R2.x.x)

8-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 LCD Assy

Table 8-8: Removal Procedure for LCD Panel Assy

Step Description Corresponding Graphic

5. With two hands hold the LCD

monitor, remove it towards the
vertically up direction. (for R1.x.x)

With two hands hold the LCD

monitor, remove it towards the
vertically up direction. (for R2.x.x)

6. Unscrew the two screws from the

LCD monitor.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-19

5718825-100 English Rev. 15 System view
Replacement Procedures

8-4-1-6 Mounting Procedure

1. Install the new parts in the reverse order of removal.

NOTE: When mounting the LCD panel assy, please make sure the
Hinge is fixed with the four screws located as below.

Figure 8-7. LCD Mounting (for R1.x.x)

Figure 8-8. LCD Mounting (for R2.x.x)

8-4-1-7 Functionality checks

Perform the checks listed in ‘Check LCD Test Pattern’ on

page 8-234.

8-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5 Keyboard Assy

Table 8-9: Keyboard Assy Disassembly List

Part Description Page Number

Touch Panel 8-22

Speaker 8-26

KBD Top Assy 8-29

SUSB PWA-USB Board 8-32

Internal ECG Cable 8-35

ECG Board 8-38

Trackball 8-41

Power and Freeze button with cable kit 8-43

AN Keyboard 8-46

Main Keyboard PWA 8-48

KBD Top Cover 8-51

Rear Handle 8-53

Arm Support Kit 8-58

KBD Bottom 8-73

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-21

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-1 Touch Panel

Purpose: This is a description on how to remove and replace the
Touch Panel.(5495622-S for R1.x.x, 5495623-2-S for R2.x.x)

8-5-1-1 Tools

• Common Phillips screwdrivers

8-5-1-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-1-3 Needed Manpower

• 1 person, 4 minutes + travel

8-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-1 Touch Panel(continued)

8-5-1-4 Removal Procedure

Table 8-10: Removal Procedure for Touch Panel

No. Steps Corresponding Graphic

1. Remove the speaker cover with two

hands.

2. Unscrew two screws.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-23

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-10: Removal Procedure for Touch Panel

No. Steps Corresponding Graphic

3. Unscrew screw1 and screw2 on the

rear side of the touch panel, then
remove cable clips. (for R1.x.x)

Unscrew screw1 and screw2 on the

rear side of the touch panel, then
remove cable clips. (Connector a is for
R2.x.x)

8-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

Table 8-10: Removal Procedure for Touch Panel

No. Steps Corresponding Graphic

4. Disconnect 2 cables, then remove the

touch panel. (for R1.x.x)

Disconnect 3 cables, then remove the

touch panel. (for R2.x.x)

8-5-1-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-1-6 Functionality checks

Perform the checks listed in ‘Check Touch Panel’ on

page 8-235.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-25

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-2 Speaker
Purpose: This is a description on how to remove and replace the
Speaker.(5487238-S)

8-5-2-1 Tools

• Common Phillips screwdrivers

8-5-2-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-2-3 Needed Manpower

• 1 person, 8 minutes + travel

8-26 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-2 Speaker(continued)

8-5-2-4 Removal Procedure

Table 8-11: Removal Procedure for Speaker

No. Steps Corresponding Graphic

1. Remove the Touch Panel, refer to

8-5-1 ‘Touch Panel’ on page 8-22.

2. Unscrew 8 screws on the KBD bottom

assy and then take out the KBD Top
Assy.

3. Disconnect 2 speaker cables.

4. Unscrew 8 screws and then remove the

speakers.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-27

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-2-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-2-6 Functionality checks

Perform the checks listed in ‘Check Speaker’ on page 8-235.

8-28 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-3 KBD Top Assy

Purpose: This is a description on how to remove and replace the
KBD Top Assy.(5487238-S for R1.x.x, 5694059-2-S for R2.x.x)

8-5-3-1 Tools

• Common Phillips screwdrivers

8-5-3-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-3-3 Needed Manpower

• 1 person, 3 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-29

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-3 KBD Top Assy(continued)

8-5-3-4 Removal Procedure

Table 8-12: Removal Procedure for KBD Top Assy

No. Steps Corresponding Graphic

1. Remove the speaker cover with two

hands.

2. Unscrew 8 screws on the KBD bottom

assy.

8-30 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

Table 8-12: Removal Procedure for KBD Top Assy

No. Steps Corresponding Graphic

3. Take out the KBD Top assy and

disconnect 7 connectors to remove the
KBD Top assy. (for R1.x.x)

Take out the KBD Top assy and

disconnect 7 connectors. (for R2.x.x)

4. Remove the Internal ECG cable, refer

to 8-5-5 ‘Internal ECG Cable’ on
page 8-35, and then remove the KBD
Top assy. (for R2.x.x)

8-5-3-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-3-6 Functionality checks

Perform the checks listed in ‘Check KBD Top Assy’ on

page 8-235.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-31

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-4 SUSB PWA-USB Board

Purpose: This is a description on how to remove and replace the
SUSB PWA-USB Board.(5450942-S)

8-5-4-1 Tools

• Common Phillips screwdrivers

8-5-4-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-4-3 Needed Manpower

• 1 person, 4 minutes + travel

8-32 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-4 SUSB PWA-USB Board(continued)

8-5-4-4 Removal Procedure

Table 8-13: Removal Procedure for SUSB PWA-USB Board

No. Steps Corresponding Graphic

1. Remove the KBD Top Assy, refer to

8-5-3 ‘KBD Top Assy’ on page 8-29.

2. Disconnect the cables on the SUSB

PWA-USB Board.

3. Unscrew 3 screws.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-33

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-13: Removal Procedure for SUSB PWA-USB Board

No. Steps Corresponding Graphic

4. With one hand hold the plastic cover,

unscrew 1 screw and then remove the
SUSB PWA-USB Board.

8-5-4-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-4-6 Functionality checks

Perform the checks listed in ‘Check SUSB PWA-USB Board’ on

page 8-235.

8-34 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-5 Internal ECG Cable

Purpose: This is a description on how to remove and replace the
Internal ECG Cable.(S2419034-S for R1.x.x, 5718361-S for
R2.x.x)

8-5-5-1 Tools

• Common Phillips screwdrivers

8-5-5-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-5-3 Needed Manpower

• 1 person, 13 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-35

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-5 Internal ECG Cable(continued)

8-5-5-4 Removal Procedure

Table 8-14: Removal Procedure for Internal ECG Cable

No. Steps Corresponding Graphic

1. Remove the SUSB PWA-USB Board,

refer to 8-5-4 ‘SUSB PWA-USB Board’
on page 8-32.

2. Disconnect the connector (for R1.x.x).

3. Disconnect the connector (for R2.x.x).

4. Unscrew 2 screws and then remove the

internal ECG cable.

8-36 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-5-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-5-6 Functionality checks

Perform the checks listed in ‘Check Internal ECG Cable’ on

page 8-235.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-37

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-6 ECG Board

Purpose: This is a description on how to remove and replace the
ECG Board.(S2419018-S for R1.x.x, 5661225-S for R2.x.x)

8-5-6-1 Tools

• Common Phillips screwdrivers

8-5-6-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-6-3 Needed Manpower

• 1 person, 4 minutes + travel

8-38 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-6 ECG Board(continued)

8-5-6-4 Removal Procedure

Table 8-15: Removal Procedure for ECG Board

No. Steps Corresponding Graphic

1. Remove the KBD Top Assy, refer to

8-5-3 ‘KBD Top Assy’ on page 8-29.

2. Disconnect 1 cable, unscrew 4 screws

and then remove the ECG board. (for
R1.x.x)

Disconnect 1 cable, unscrew 5 screws

and then remove the ECG board. (for
R2.x.x)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-39

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-6-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

NOTE: The magnet ring needs to be fixed under the right corner of
the ECG Board and the ECG to KBS USB cable needs to be
fixed by the AN support blanket.

Figure 8-9. ECG Board Mounting

8-5-6-6 Functionality checks

Perform the checks listed in ‘Check ECG Board’ on page 8-235.

8-40 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-7 Trackball
Purpose: This is a description on how to remove and replace the
Trackball.(5447726-S)

8-5-7-1 Tools

• Common Phillips screwdrivers

8-5-7-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-7-3 Needed Manpower

• 1 person, 8 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-41

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-7 Trackball(continued)

8-5-7-4 Removal Procedure

Table 8-16: Removal Procedure for Trackball

No. Steps Corresponding Graphic

1. Remove the KBD Top Assy, refer to

8-5-3 ‘KBD Top Assy’ on page 8-29.

2. Disconnect 2 cables, unscrew 2 screws

and then remove the trackball.

8-5-7-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-7-6 Functionality checks

Perform the checks listed in ‘Check Trackball’ on page 8-235.

8-42 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-8 Power and Freeze button with cable kit

Purpose: This is a description on how to remove and replace the
Trackball.(5494374-S)

8-5-8-1 Tools

• Common Phillips screwdrivers

8-5-8-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-8-3 Needed Manpower

• 1 person, 13 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-43

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-8 Power and Freeze button with cable kit(continued)

8-5-8-4 Removal Procedure

Table 8-17: Removal Procedure for Power and Freeze button Kit

No. Steps Corresponding Graphic

1. Remove the KBD Top Assy, refer to

8-5-3 ‘KBD Top Assy’ on page 8-29.

2. Unscrew 3 screws, disconnect 2

connectors and then remove the Freeze
KBD PWA with cable.

3. Seperate the buttons with butter from

the Freeze KBD PWA.

4. Unscrew 5 screws and disconnect the

cable connector.

5. Remove the soft key buttons and then

remove the Soft KBD PWA with cable.

8-44 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

Table 8-17: Removal Procedure for Power and Freeze button Kit

No. Steps Corresponding Graphic

6. Seperate the power button with butter

from the Freeze KBD PWA.

8-5-8-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-8-6 Functionality checks

Perform the checks listed in ‘Check Power and Freeze button

with cable kit’ on page 8-235.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-45

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-9 AN Keyboard
Purpose: This is a description on how to remove and replace the
AN Keyboard.(5498252-2-S)

8-5-9-1 Tools

• Common Phillips screwdrivers

8-5-9-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-9-3 Needed Manpower

• 1 person, 6 minutes + travel

8-46 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-9-4 Removal Procedure

Table 8-18: Removal Procedure for AN Keyboard

No. Steps Corresponding Graphic

1. Remove the KBD Top Assy, refer to

8-5-3 ‘KBD Top Assy’ on page 8-29.

2. Remove the ECG Board, refer to

8-5-6 ‘ECG Board’ on page 8-38.

3. Unscrew 8 screws and then remove the

AN Keyboard cover.

4. Disconnect the connector and then

remove AN keyboard.

8-5-9-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-9-6 Functionality checks

Perform the checks listed in ‘Check AN Keyboard’ on

page 8-235.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-47

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-10 Main Keyboard PWA

Purpose: This is a description on how to remove and replace the
Main Keyboard PWA.(5483422-S for R1.x.x, 5720091-2-S for
R2.x.x)

8-5-10-1 Tools

• Common Phillips screwdrivers

8-5-10-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-10-3 Needed Manpower

• 1 person, 20 minutes + travel

8-48 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-10 Main Keyboard PWA(continued)

8-5-10-4 Removal Procedure

Table 8-19: Removal Procedure for Main Keyboard PWA

No. Steps Corresponding Graphic

1. Remove AN Keyboard, refer to

8-5-9 ‘AN Keyboard’ on page 8-46.

2. Disconnect 3 connectors.

3. Remove the Trackball, refer to

8-5-7 ‘Trackball’ on page 8-41.

4. Remove the button caps.

5. Unscrew 18 screws and then remove

the main keyboard PWA from the KBD
Top cover.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-49

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-19: Removal Procedure for Main Keyboard PWA

No. Steps Corresponding Graphic

6. Seperate the buttons with butter from

the Freeze KBD PWA.

8-5-10-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-10-6 Functionality checks

Perform the checks listed in ‘Check Main Keyboard PWA’ on

page 8-235.

8-50 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-11 KBD Top Cover

Purpose: This is a description on how to remove and replace the
KBD Top Cover.(5487113-S)

8-5-11-1 Tools

• Common Phillips screwdrivers

8-5-11-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-11-3 Needed Manpower

• 1 person, 13 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-51

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-11 KBD Top Cover(continued)

8-5-11-4 Removal Procedure

Table 8-20: Removal Procedure for KBD Top Cover

No. Steps Corresponding Graphic

1. Remove the KBD Top Assy, refer to

8-5-3 ‘KBD Top Assy’ on page 8-29.

2. Remove the Power and Freeze button

with cable kit, refer to 8-5-8 ‘Power and
Freeze button with cable kit’ on
page 8-43.

3. Remove the Main Keyboard PWA, refer

to 8-5-10 ‘Main Keyboard PWA’ on
page 8-48.

8-5-11-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-11-6 Functionality checks

Perform the checks listed in ‘Check KBD Top Cover’ on

page 8-235.

8-52 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-12 Rear Handle

Purpose: This is a description on how to remove and replace the
Rear Handle.(5473834-S)

8-5-12-1 Tools

• Common Phillips screwdrivers

• 5mm Inner Hexangular Set

8-5-12-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-12-3 Needed Manpower

• 1 person, 22 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-53

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-12 Rear Handle(continued)

8-5-12-4 Removal Procedure

Table 8-21: Removal Procedure for Rear Handle

No. Steps Corresponding Graphic

1. Remove the LCD Panel Assy, refer to

8-4-1 ‘LCD Panel Assy’ on page 8-14.

2. Remove the Touch Panel, refer to

8-5-1 ‘Touch Panel’ on page 8-22.

3. Remove two hole covers and unscrew 2

screws, then remove the arm fix cover.

4. Unscrew 10 screws on the KBD bottom

assy.

8-54 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

Table 8-21: Removal Procedure for Rear Handle

No. Steps Corresponding Graphic

5. Unscrew 10 screws on the KBD bottom

assy.

6. Unscrew 4 screws and then remove the

speaker back cover.

7. Remove the arm top cover.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-55

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-21: Removal Procedure for Rear Handle

No. Steps Corresponding Graphic

8. Unscrew 2 screws, loose the cables

and then remove the arm back cover.

9. Unscrew 3 screws.

10. Unscrew 1 screw and remove the arm

front cover.

8-56 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

Table 8-21: Removal Procedure for Rear Handle

No. Steps Corresponding Graphic

11. Unscrew 4 screws and then remove the

Rear Handle.

8-5-12-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-12-6 Functionality checks

Perform the checks listed in ‘Check Rear Handle’ on

page 8-237.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-57

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-13 Arm Support Kit

Purpose: This is a description on how to remove and replace the
Arm Support Kit.(5495634-S, 5495634-1-S)

8-5-13-1 Tools

• Common Phillips screwdrivers

8-5-13-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-13-3 Needed Manpower

• 1 person, 18 minutes + travel

8-58 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-13 Arm Support Kit(continued)

8-5-13-4 Removal Procedure

Table 8-22: Removal Procedure for Arm Support Kit

No. Steps Corresponding Graphic

1. Remove the LCD Panel Assy, refer to

8-4-1 ‘LCD Panel Assy’ on page 8-14.

2. Unscrew 2 screws to remove the hinge.

3. Remove two hole covers and unscrew 2

screws, then remove the arm fix cover.

4. Remove the arm top cover and arm

back cover, refer to step 7 and 8 in
8-5-12 ? Rear Handle ? on page 8-53.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-59

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-22: Removal Procedure for Arm Support Kit

No. Steps Corresponding Graphic

5. Unscrew 3 screws and then remove the

Arm Support kit.

8-5-13-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-13-6 Functionality checks

Perform the checks listed in ‘Check Arm Support Kit’ on

page 8-234.

8-60 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-14 Flexible Arm

Purpose: This is a description on how to remove and replace the
Flexible Arm (5498520).

8-5-14-1 Tools

• Common Phillips screwdrivers

8-5-14-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-14-3 Needed Manpower

• 1 person, 20 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-61

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-14-4 Removal Procedure

Table 8-23: Removal Procedure for Flexible Arm

No. Steps Corresponding Graphic

1. Remove the LCD Panel Assy, refer to

8-4-1 ‘LCD Panel Assy’ on page 8-14.

2. Unscrew 4 screws on the flexible arm

bottom cover.

3. Remove the arm bottom cover.

4. Remove the flexible arm support cover.

8-62 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

Table 8-23: Removal Procedure for Flexible Arm

No. Steps Corresponding Graphic

5. Unscrew 1 screw to loose the cables.

6. Unscrew 2 screws and remove the

braket.

7. Disconnect the HDMI and power cable.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-63

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-23: Removal Procedure for Flexible Arm

No. Steps Corresponding Graphic

8. Rotate the arm lock and remove it.

9. Unscrew 3 screws besides the arm

lock.
Note: To make sure the three screws
are located in the hole position, please
make sure the flexible arm in the
vertical direction of the rear handle.
Note: With one hand hold the flexible
arm when unscrewing the screws.

10. Remove the flexible arm with two

hands.

8-5-14-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-14-6 Functionality checks

Perform the checks listed in ‘Check Flexible Arm’ on

page 8-234.

8-64 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-15 Flexible Arm

Purpose: This is a description on how to remove and replace the
Flexible Arm (5722513).

8-5-15-1 Tools

• Common Phillips screwdrivers

8-5-15-2 Preparation

• Shut down the system and disconnect the power cord.

8-5-15-3 Needed Manpower

• 1 person, 20 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-65

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-15-4 Removal Procedure

Table 8-24: Removal Procedure for Flexible Arm

No. Steps Corresponding Graphic

1. Remove the LCD Panel Assy, refer to

8-4-1 ‘LCD Panel Assy’ on page 8-14.

2. Unscrew 1 screw and then remove the

flexible arm back cover.

8-66 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

Table 8-24: Removal Procedure for Flexible Arm

No. Steps Corresponding Graphic

3. Loosen the cable hook (c) and

disconnect the HDMI cable (a) and
power cable (b).

4. Unscrew 1 screw.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-67

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-24: Removal Procedure for Flexible Arm

No. Steps Corresponding Graphic

5. Remove the flexible arm assy with two

hands.

6. Remove two sheets.

8-68 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

Table 8-24: Removal Procedure for Flexible Arm

No. Steps Corresponding Graphic

7. Unscrew 4 screws [M5*16].

8. Remove the UI adapter.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-69

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-24: Removal Procedure for Flexible Arm

No. Steps Corresponding Graphic

9. Unscrew 3 screws on the rear side of

the rear handle.
Note: With one hand hold the flexible
arm when unscrewing the screws.

10. Remove the flexible arm support and

take two screws [Pin 4*10].

8-5-15-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

NOTE: To ensure the arm does not swing, lock the flexible arm before
installing.

8-70 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

Figure 8-10. Lock the ARM

NOTE: Fix the black sheet on the flexible arm assy and then install the
flexible arm assy on the UI adapter with lock plate.

Figure 8-11. Fix the sheet

NOTE: To adjust the arm flexible or stable, loosen or fasten the screw
shown as below.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-71

5718825-100 English Rev. 15 System view
Replacement Procedures

Figure 8-12. Screw Location

8-72 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Keyboard Assy

8-5-16 KBD Bottom

Purpose: This is a description on how to remove and replace the
KBD Bottom.(5492248-S)

8-5-16-1 Tools

• Common Phillips screwdrivers

• 5mm Inner Hexangular Set

8-5-16-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-5-16-3 Needed Manpower

• 1 person, 15 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-73

5718825-100 English Rev. 15 System view
Replacement Procedures

8-5-16-4 Removal Procedure

Table 8-25: Removal Procedure for KBD Bottom

No. Steps Corresponding Graphic

1. Remove the LCD Panel, refer to

8-4-1 ‘LCD Panel Assy’ on page 8-14.

2. Remove the KBD Top assy, refer to

8-5-3 ‘KBD Top Assy’ on page 8-29.

3. Remove the Rear handle, refer to

8-5-12 ‘Rear Handle’ on page 8-53.

4. Remove the Internal ECG Cable, refer

to 8-5-5 ‘Internal ECG Cable’ on
page 8-35.

5. Remove the probe holder and gel

holder.

6. Loose all the cable clips.

7. Unscrew 4 screws and then remove the

KBD Bottom.

8-5-16-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-5-16-6 Functionality checks

Perform the checks listed in ‘Check KBD Bottom’ on

page 8-235.

8-74 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6 Body Assy

8-6-1 Body Assy Overview

Figure 8-13. Body Assy Overview

1. Body Front Cover Assy

2. Body Back Cover Assy
3. Body Left Side Cover Assy
4. Body Right Side Cover Assy

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-75

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-2 Body Assy Disassembly List

Table 8-26: Body Assy Disassembly List

Part Description Page Number

Body Front Cover 8-77

Body Back Cover 8-78

Body Left Cover 8-80

Body Right Cover 8-82

Body Top Cover 8-84

Body Neck 8-86

Internal Box Assy 8-88

Hardisk Assy 8-93

ACDC Module 8-100

I/O Board PWA 8-103

WPWR PWA 8-112

CPU Assy 8-119

WMST PWA 8-130

Relay Assy 8-135

CWD PWA 8-137

Fan Assy with cable 8-139

8-76 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-3 Body Front Cover

Purpose: This is a description on how to remove and replace the
Body Front Cover.(5421619-S)

8-6-3-1 Tools

• Common Phillips screwdrivers

8-6-3-2 Preparation

• Shut down the system and disconnect the power cord.

8-6-3-3 Needed Manpower

• 1 person, 2 minutes + travel

8-6-3-4 Removal Procedure

Table 8-27: Removal Procedure for Body Front Cover

No. Steps Corresponding Graphic

1. Pull out the body front cover with hands.

8-6-3-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-77

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-4 Body Back Cover

Purpose: This is a description on how to remove and replace the
Body Back Cover.(5448531-S)

8-6-4-1 Tools

• Common Phillips screwdrivers

8-6-4-2 Preparation

• Shut down the system and disconnect the power cord.

8-6-4-3 Needed Manpower

• 1 person, 4 minutes + travel

8-78 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-4 Body Back Cover(continued)

8-6-4-4 Removal Procedure

Table 8-28: Removal Procedure for Body Back Cover

No. Steps Corresponding Graphic

1. Pull out the 2 hole covers at the body

back cover.

2. Unscrew 2 screws and then remove the

body back cover.

8-6-4-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-79

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-5 Body Left Cover

Purpose: This is a description on how to remove and replace the
Body Left Cover.(5449143-S)

8-6-5-1 Tools

• Common Phillips screwdrivers

8-6-5-2 Preparation

• Shut down the system and disconnect the power cord.

8-6-5-3 Needed Manpower

• 1 person, 8 minutes + travel

8-80 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-5 Body Left Cover(continued)

8-6-5-4 Removal Procedure

Table 8-29: Removal Procedure for Body Left Cover

No. Steps Corresponding Graphic

1. Remove the body front cover, refer to

8-6-3 ‘Body Front Cover’ on page 8-77.

2. Remove the body back cover, refer to

8-6-4 ‘Body Back Cover’ on page 8-78.

3. Unscrew 4 screws and then remove the

body left cover.

8-6-5-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-81

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-6 Body Right Cover

Purpose: This is a description on how to remove and replace the
Body Right Cover.(5453635-S)

8-6-6-1 Tools

• Common Phillips screwdrivers

8-6-6-2 Preparation

• Shut down the system and disconnect the power cord.

8-6-6-3 Needed Manpower

• 1 person, 8 minutes + travel

8-82 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-6 Body Right Cover(continued)

8-6-6-4 Removal Procedure

Table 8-30: Removal Procedure for Body Right Cover

No. Steps Corresponding Graphic

1. Remove the body front cover, refer to

8-6-3 ‘Body Front Cover’ on page 8-77.

2. Remove the body back cover, refer to

8-6-4 ‘Body Back Cover’ on page 8-78.

3. Unscrew 4 screws and then remove the

body right cover.

8-6-6-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-83

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-7 Body Top Cover

Purpose: This is a description on how to remove and replace the
Body Top Cover.(5492266-S)

8-6-7-1 Tools

• Common Phillips screwdrivers

• 5mm Inner Hexangular Set

8-6-7-2 Preparation

• Shut down the system and disconnect the power cord.

8-6-7-3 Needed Manpower

• 1 person, 34 minutes + travel

8-84 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-7 Body Top Cover(continued)

8-6-7-4 Removal Procedure

Table 8-31: Removal Procedure for Body Top Cover

No. Steps Corresponding Graphic

1. Remove the body left cover, refer to

8-6-5 ‘Body Left Cover’ on page 8-80.

2. Remove the body right cover, refer to

8-6-6 ‘Body Right Cover’ on page 8-82.

3. Remove the KBD Bottom, refer to

8-5-16 ‘KBD Bottom’ on page 8-73.

4. Unscrew 2 screws on the bottom and

then remove the body top cover.

8-6-7-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-85

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-8 Body Neck

Purpose: This is a description on how to remove and replace the
Body Neck.(5492247-S)

8-6-8-1 Tools

• Common Phillips screwdrivers

• 5mm Inner Hexangular Set

8-6-8-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-6-8-3 Needed Manpower

• 1 person, 40 minutes + travel

8-86 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-8 Body Neck(continued)

8-6-8-4 Removal Procedure

Table 8-32: Removal Procedure for Body Top Cover

No. Steps Corresponding Graphic

1. Remove the body top cover, refer to

8-6-7 ‘Body Top Cover’ on page 8-84.

2. Unscrew 6 screws and then remove the

body neck.

8-6-8-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-87

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-9 Internal Box Assy

Purpose: This is a description on how to remove and replace the
Internal Box Assy.(5482796-S for R1.x.x, 5495619-4-S for
R2.x.x, 5495619-5-S for R2.0.3 and above)

8-6-9-1 Tools

• Common Phillips screwdrivers

8-6-9-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-6-9-3 Needed Manpower

• 1 person, 6 minutes + travel

8-88 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-9 Internal Box Assy(continued)

8-6-9-4 Removal Procedure

Table 8-33: Removal Procedure for Internal Box Assy

No. Steps Corresponding Graphic

1. Remove the body left cover, refer to

8-6-5 ‘Body Left Cover’ on page 8-80.

2. Disconnect 2 connectors to Harddisk on

the top side and loose the cables. (For
5482796-S for R1.x.x and 5495619-4-S
for R2.x.x)

Disconnect 4 connectors on the top side

of Internal Box Assy. (For 5495619-5-S
for R2.0.3 and above)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-89

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-33: Removal Procedure for Internal Box Assy

No. Steps Corresponding Graphic

3. Disconnect all the connectors.

Note: The Note is only for service
engineer, and it indicates the correct
removal procedure for internal box assy.

4. Disconnect the fan cable.

8-90 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

Table 8-33: Removal Procedure for Internal Box Assy

No. Steps Corresponding Graphic

5. Unscrew 2 screws.

6. Pull out the internal box assy.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-91

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-9-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

NOTE: The system indicates the left USB port is for hub cable, and
the right USB port is for keyboard cable when installing the
internal box.

Figure 8-14. Internal Box Mounting

8-6-9-6 Rewrite the Serial Number

After the internal box assy is replaced, the serial number on the
Harddisk will not match that on the VPD. When powering the
system, the system will indicate to rewrite the serial number,
refer to 7-7-4 ‘Rewrite the Serial Number’ on page 7-50.

8-6-9-7 Functionality checks

Perform the checks listed in ‘Check Internal Box Assy’ on

page 8-234.

8-92 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-10 Hardisk Assy

Purpose: This is a description on how to remove and replace the
Harddisk Assy.(5487561-S for R1.x.x, 5694056-S for R2.x.x,
5755632-S for R2.0.3 and above)

8-6-10-1 Tools

• Common Phillips screwdrivers

8-6-10-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-6-10-3 Needed Manpower

• 1 person, 10 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-93

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-10 Hardisk Assy(continued)

8-6-10-4 Removal Procedure

Table 8-34: Removal Procedure for Harddisk Assy (5487561-S for R1.x.x, 5694056-S
for R2.x.x)

No. Steps Corresponding Graphic

1. Remove the body front cover, refer to

8-6-3 ‘Body Front Cover’ on page 8-77.

2. Unscrew 2 screws and remove the

shelf.

3. Unscrew 2 screws.

4. Remove the body left cover, refer to

8-6-5 ‘Body Left Cover’ on page 8-80.

8-94 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

Table 8-34: Removal Procedure for Harddisk Assy (5487561-S for R1.x.x, 5694056-S
for R2.x.x)

No. Steps Corresponding Graphic

5. From the body left side, disconnect 2

connectors on the harddisk.

6. Remove the harddisk from the body

front side.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-95

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-10 Hardisk Assy(continued)

Table 8-35: Removal Procedure for Harddisk Assy (5755632-S for R2.0.3 and above))

No. Steps Corresponding Graphic

1. Remove the body front cover, refer to

8-6-3 ‘Body Front Cover’ on page 8-77.

2. Unscrew 2 screws.

3. Remove the harddisk from the body

front side.

8-6-10-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-10-6 Rewrite the Serial Number

After the Harddisk is replaced, the serial number on the

Harddisk will not match that on the VPD. When powering the
system, the system will indicate to rewrite the serial number,
refer to 7-7-4 ‘Rewrite the Serial Number’ on page 7-50.

8-6-10-7 Functionality checks

Perform the checks listed in ‘Check Hardisk Assy’ on

page 8-237.

8-96 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-11 Internal Battery

Purpose: This is a description on how to remove and replace the
Internal Battery.(5451284, 5451284-2)

8-6-11-1 Tools

• Common Phillips screwdrivers

8-6-11-2 Preparation

• Shut down the system and disconnect the power cord.

8-6-11-3 Needed Manpower

• 1 person, 5 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-97

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-11 Internal Battery(continued)

8-6-11-4 Removal Procedure

Table 8-36: Removal Procedure for Internal Battery (For R2.0.1/R2.0.2)

No. Steps Corresponding Graphic

1. Remove the internal box assy, refer to

8-6-9 ‘Internal Box Assy’ on page 8-88.

2. Unscrew 2 screws and take out the

battery with hands..

Table 8-37: Removal Procedure for Internal Battery (For R2.0.3 and above)

No. Steps Corresponding Graphic

1. Pull out the body front cover with hands.

8-98 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

Table 8-37: Removal Procedure for Internal Battery (For R2.0.3 and above)

No. Steps Corresponding Graphic

2. Unscrew the 2 screws and remove the

bracket.

3. Unscrew 1 screw with hand, then

remove the battery bracket. Then take
out the battery.

8-6-11-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-11-6 Functionality checks

Perform the checks listed in ‘Check Internal Battery’ on

page 8-234.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-99

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-12 ACDC Module

Purpose: This is a description on how to remove and replace the
ACDC Module.(5440428-S for R1.x.x, 5440428-2-S for R2.x.x)

8-6-12-1 Tools

• Common Phillips screwdrivers

8-6-12-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-6-12-3 Needed Manpower

• 1 person, 10 minutes + travel

8-100 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-12-4 Removal Procedure

Table 8-38: Removal Procedure for ACDC Module

No. Steps Corresponding Graphic

1. Remove the internal box assy, refer to

8-6-9 ‘Internal Box Assy’ on page 8-88.

2. Unscrew 5 screws and disconnect the

cables.

3. Unscrew 2 screws and disconnect the

connector, then remove the ACDC
Module (for R1.x.x).

Unscrew 2 screws and disconnect the

connector, then remove the ACDC
Module (for R2.x.x).

8-6-12-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-101

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-12-6 Functionality checks

Perform the checks listed in ‘Check ACDC Module’ on

page 8-234.

8-102 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-13 I/O Board PWA

Purpose: This is a description on how to remove and replace the
I/O Board PWA.(5456663-S for R1.x.x, 5456663-4-S and
5456663-5-S for R2.x.x)

8-6-13-1 Tools

• Common Phillips screwdrivers

8-6-13-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-6-13-3 Needed Manpower

• 1 person, 20 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-103

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-13 I/O Board PWA(continued)

8-6-13-4 Removal Procedure

Table 8-39: Removal Procedure for I/O Board PWA (5456663-S for R1.x.x and
5456663-4-S for R2.x.x)

No. Steps Corresponding Graphic

1. Remove the internal box assy, refer to

8-6-9 ‘Internal Box Assy’ on page 8-88.

2. Unscrew 1 screw on the rear panel.

3. Disconnect the 4 cabels and unscrew 2

screws, and then remove the SFPC
Board (5442429-S). (for R1.x.x)

Disconnect the 5 cables and unscrew 2

screws, and then remove the SFPC
Board (5442429-3-s). (for R2.x.x)

8-104 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

Table 8-39: Removal Procedure for I/O Board PWA (5456663-S for R1.x.x and
5456663-4-S for R2.x.x)

No. Steps Corresponding Graphic

4. Unscrew 6 screws.

5. Remove the I/O Board PWA with

hands.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-105

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-13 I/O Board PWA(continued)

Table 8-40: Removal Procedure for I/O Board PWA (5456663-5-S for R2.x.x)

No. Steps Corresponding Graphic

1. Remove the internal box assy, refer to

8-6-9 ‘Internal Box Assy’ on page 8-88.

2. Disconnect the 5 cables and unscrew 2

screws.

3. Unscrew 6 screws.

4. Remove the I/O Board PWA with

hands.

8-106 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-13-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-13-6 Functionality checks

Perform the checks listed in ‘Check I/O Board PWA’ on

page 8-234.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-107

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-14 AP2M PWA

Purpose: This is a description on how to remove and replace the
AP2M PWA.(5745862-S for R2.0.3 and above)

8-6-14-1 Tools

• Common Phillips screwdrivers

8-6-14-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-6-14-3 Needed Manpower

• 1 person, 20 minutes + travel

8-108 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-14 AP2M PWA(continued)

8-6-14-4 Removal Procedure

Table 8-41: Removal Procedure for AP2M PWA

No. Steps Corresponding Graphic

1. Remove the Internal Box Assy, refer to

8-6-9 ‘Internal Box Assy’ on page 8-88.

2. Unscrew 2 screw and disconnect 1

connector, then remove the I/O PWA
blanket.

3. Disconnect the connector, and move

the cable above.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-109

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-41: Removal Procedure for AP2M PWA

No. Steps Corresponding Graphic

4. Disconnect 1 connector
and untie 2 cable hooks.

5. Unscrew 5 screws and remove I/O PWA

blanket with hands.

6. Unscrew 2 screws.

8-110 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

Table 8-41: Removal Procedure for AP2M PWA

No. Steps Corresponding Graphic

7. Slowly and Carefully remove AP2M

PWA.

8-6-14-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-14-6 Functionality checks

Perform the checks listed in ‘Check AP2M PWA’ on page 8-238.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-111

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-15 WPWR PWA

Purpose: This is a description on how to remove and replace the
WPWR PWA.(5473829-S for R1.x.x, 5537639-2-S for R2.x.x,
5537638-3-S for R2.0.3 and above)

8-6-15-1 Tools

• Common Phillips screwdrivers

8-6-15-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-6-15-3 Needed Manpower

• 1 person, 20 minutes + travel

8-112 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-15 WPWR PWA(continued)

8-6-15-4 Removal Procedure

Table 8-42: Removal Procedure for WPWR PWA (5473829-S for R1.x.x, 5537639-2-S
for R2.0.0)

No. Steps Corresponding Graphic

1. Remove the Internal Box Assy, refer to

8-6-9 ‘Internal Box Assy’ on page 8-88.

2. Unscrew 1 screw.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-113

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-42: Removal Procedure for WPWR PWA (5473829-S for R1.x.x, 5537639-2-S
for R2.0.0)

No. Steps Corresponding Graphic

3. Disconnect the connector, unscrew

screws 1, 2 to remove the SFPC PWA,
unscrew screws 3~6, then remove the
I/O PWA blanket with hands.
(for R1.x.x)

Disconnect the connector, unscrew

screws 1, 2 to remove the SFPC PWA,
unscrew screws 3~6, then remove the
I/O PWA blanket with hands.
(for R2.x.x)

4. Disconnect the connector, unscrew 5

screws, then seperate the WPWR PWA
from the cover. (for R1.x.x)

8-114 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

Table 8-42: Removal Procedure for WPWR PWA (5473829-S for R1.x.x, 5537639-2-S
for R2.0.0)

No. Steps Corresponding Graphic

Disconnect the connector, unscrew 6

screws, then seperate the WPWR PWA
from the cover. (for 2.0.0)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-115

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-15 WPWR PWA(continued)

Table 8-43: Removal Procedure for WPWR PWA (5537638-3-S for R2.0.3 and above)

No. Steps Corresponding Graphic

1. Remove the Internal Box Assy, refer to

8-6-9 ‘Internal Box Assy’ on page 8-88.

2. Remove AP2M PWA, refer to

8-6-14 ‘AP2M PWA’ on page 8-108.

3. Unscrew 6 screws, then remove the

WPWR PWA from the cover.

4. Remove the battery cable. While

pressing both sides of the connector on
white buttons, pull out the connector.

8-116 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-15-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-15-6 Functionality checks

Perform the checks listed in ‘Check WPWR PWA’ on

page 8-234.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-117

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-16 SCNT FPC

Purpose: This is a description on how to remove and replace the

SCNT FPC.(5448057-2-S)

8-6-16-1 Tools

• Common Phillips screwdrivers

8-6-16-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-6-16-3 Needed Manpower

• 1 person, 22 minutes + travel

8-6-16-4 Removal Procedure

Table 8-44: Removal Procedure for SCNT FPC

No. Steps Corresponding Graphic

1. Remove the I/O PWA blanket, refer to

8-6-14 ‘AP2M PWA’ on page 8-108.

2. Unscrew 2 screws and remove CNT

FPC.

8-6-16-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-16-6 Functionality checks

Perform the checks listed in ‘Check SCNT FPC’ on page 8-238.

8-118 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-17 CPU Assy

Purpose: This is a description on how to remove and replace the
CPU Assy.(5461693-S for R1.x.x, 5717877-S for R2.x.x)

8-6-17-1 Tools

• Common Phillips screwdrivers

8-6-17-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.0.0)

8-6-17-3 Needed Manpower

• 1 person, 20 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-119

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-17-4 Removal Procedure

Table 8-45: Removal Procedure for CPU Assy

No. Steps Corresponding Graphic

1. Remove the I/O PWA blanket, refer to

step1~3 of 8-6-15 ‘WPWR PWA’ on
page 8-112.

2. Disconnect the connector, unscrew 5

screws and remove CPU Assy.

Unscrew 5 screws. (For R2.0.3 and

above)

8-6-17-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-120 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-17-6 Rewrite the Serial Number

After the CPU is replaced, the serial number on the Harddisk will
not match that on the VPD. When powering the system, the
system will indicate to rewrite the serial number, refer to
7-7-4 ‘Rewrite the Serial Number’ on page 7-50.

8-6-17-7 Functionality checks

Perform the checks listed in ‘Check CPU Assy’ on page 8-237.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-121

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-17-8 Update the BIOS Time

NOTE: Please make sure the system BIOS time has been updated to
the current time when rebooting the system after the CPU
replacement.
1. Press Power button on the Control Panel to power on the
system, press Config. on the control panel immediately.

Figure 8-15. Enter BIOS

2. Input the BIOS password gerural and login the BIOS.

Figure 8-16. Input Password

8-122 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-17-8 Update the BIOS Time(continued)

3. In the BIOS Main page, update the BIOS time to the current
time.

Figure 8-17. Update BIOS time

4. Press Spooler on the cotrol panel and then select Yes to

save and exit BIOS.

Figure 8-18. Exit BIOS

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-123

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-17-8-1The default BIOS Setting

1. Press Power button on the Control Panel to power on the
system, press Config. on the control panel immediately.

Figure 8-19. Enter BIOS

2. Input the BIOS password gerural and login the BIOS.

Figure 8-20. Input Password

8-124 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-17-8-1The default BIOS Setting(continued)

3. This is the default BIOS main page.

Figure 8-21. BIOS Main Page

4. Select Advanced tab to enter the Advanced page.

Figure 8-22. BIOS Advanced Page

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-125

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-17-8-1The default BIOS Setting(continued)

5. Select Advanced tab, and then select PCI Subsystem

Settings to check the PCI information.

Figure 8-23. PCI Subsystem Settings

6. Select Advanced tab, and then select USB Configuration

to check the USB Configuration information.

Figure 8-24. USB Configuration

8-126 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-17-8-1The default BIOS Setting(continued)

7. Select Boot tab to enter the Boot page.

Figure 8-25. BIOS Boot Page

8. Select Chipset tab to enter the chipset page.

Figure 8-26. BIOS Chipset Page

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-127

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-17-8-1The default BIOS Setting(continued)

9. Select Chipset tab, and then select SystemAgent

Configuration to check the system agent information.

Figure 8-27. SystemAgent Configuration

10. Select Chipset tab, and then select SystemAgent

Configuration-> Graphics Configuration to check the
graphic configuration information.

Figure 8-28. Graphic Configuration

8-128 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-17-8-1The default BIOS Setting(continued)

11. Select Chipset tab, and then select SystemAgent

Configuration-> Graphics Configuration-> LCD Control
to check the LCD control information.

Figure 8-29. LCD Control

12. Press Spooler on the cotrol panel and then select Yes to
save and exit BIOS.

Figure 8-30. Exit BIOS

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-129

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-18 WMST PWA

Purpose: This is a description on how to remove and replace the

WMST PWA.(5506731-5-S, 5737788-4-S)

8-6-18-1 Tools

• Common Phillips screwdrivers

8-6-18-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

8-6-18-3 Needed Manpower

• 1 person, 24 minutes + travel

8-130 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-18-4 Removal Procedure

Table 8-46: Removal Procedure for WMST PWA

No. Steps Corresponding Graphic

1. Remove the CPU Assy, refer to

8-6-17 ‘CPU Assy’ on page 8-119.

2. Unscrew 4 screws, then disconnect 3

connectors. (For 5506731-5-S)

Unscrew 9 screws, then remove the

WMST PWA with heatsink. (For
5506731-5-S)

Unscrew 6 screws, disconnect 3

connectors (a,b,c). (For 5737788-4-S)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-131

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-46: Removal Procedure for WMST PWA

No. Steps Corresponding Graphic

Unscrew 9 screws, then remove the

WMST PWA with heatsink. (For
5737788-4-S)

3. Unscrew 2 screws, then remove the

CWD PWA in the back of WMST PWA.
(5506731-5-S)

8-132 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-18-5 Mounting Procedure

Table 8-47: Mounting Procedure for WMST PWA (5506731-5-S)

No. Steps Corresponding Graphic

1. Remove the release paper from the

back of the big heatsink, then align it
with the WMST PWA.

2. Screw the 2 screws.

3. Remove the release paper from the

back of the heatsink. Find the
highlighted position in the back of
WMST PWA.

4. Align the heatsink and attach it, remove

the release paper from the heatsink.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-133

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-47: Mounting Procedure for WMST PWA (5506731-5-S)

No. Steps Corresponding Graphic

5. Install CWD PWA, WMST PWA and

CPU assy in reverse order of removal
procedure.

Note: During the mounting procedure,

please be careful to protect the WMST
PWA, install the WMST PWA on the
foam if necessary.

8-6-18-6 Mounting Procedure

Table 8-48: Mounting Procedure for WMST PWA (5737788-4-S)

No. Steps Corresponding Graphic

1. Remove the release paper from the

heatsink. Install WMST PWA and CPU
assy in reverse order of removal
procedure.

Note: During the mounting procedure,

please be careful to protect the WMST
PWA, install the WMST PWA on the
foam if necessary.

8-6-18-7 Functionality checks

Perform the checks listed in ‘Check WMST PWA’ on

page 8-236.

8-134 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-19 Relay Assy

Purpose: This is a description on how to remove and replace the

Relay Assy.(5457976-S, 5457976-3-S)

8-6-19-1 Tools

• Common Phillips screwdrivers

8-6-19-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

8-6-19-3 Needed Manpower

• 1 person, 10 minutes + travel

8-6-19-4 Removal Procedure

Table 8-49: Removal Procedure for Relay Assy

No. Steps Corresponding Graphic

1. Remove the internal box assy, refer to

8-6-9 ‘Internal Box Assy’ on page 8-88.

2. Unscrew 8 screws and remove the

SEPC board(5442429-S), then remove
the Relay Assy.

8-6-19-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-135

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-19-6 Functionality checks

Perform the checks listed in ‘Check Relay Assy’ on page 8-234.

8-136 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-20 CWD PWA

Purpose: This is a description on how to remove and replace the

CWD PWA.(5452120-S)

8-6-20-1 Tools

• Common Phillips screwdrivers

8-6-20-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

8-6-20-3 Needed Manpower

• 1 person, 12 minutes + travel

8-6-20-4 Removal Procedure

Table 8-50: Removal Procedure for CWD PWA

No. Steps Corresponding Graphic

1. Remove the Relay Assy, refer to

8-6-19 ‘Relay Assy’ on page 8-135.

2. Unscrew 2 screws and then remove the

CWD PWA.

8-6-20-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-137

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-20-6 Functionality checks

Perform the checks listed in ‘Check CWD PWA’ on page 8-234.

8-138 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-21 Fan Assy with cable

Purpose: This is a description on how to remove and replace the

Fan Assy with cable.(5448554-S)

8-6-21-1 Tools

• Common Phillips screwdrivers

8-6-21-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

8-6-21-3 Needed Manpower

• 1 person, 6 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-139

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-21-4 Removal Procedure

Table 8-51: Removal Procedure for Fan Assy with cable

No. Steps Corresponding Graphic

1. Remove the body back cover, refer to

8-6-4 ‘Body Back Cover’ on page 8-78.

2. Disconnect all the cables.

3. Disconnect the fan cable.

8-140 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

Table 8-51: Removal Procedure for Fan Assy with cable

No. Steps Corresponding Graphic

4. Unscrew 4 screws and pull out the

integrated box.

5. At the bottom of the integrated box,

remove the fire protect cover.

6. Unscrew 8 screws and then remove the

fan assy.

8-6-21-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-21-6 Functionality checks

Perform the checks listed in ‘Check Fan Assy with cable’ on

page 8-237.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-141

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-22 Battery and SATA Connection PWA

Purpose: This is a description on how to remove and replace the
Battery and SATA Connection PWA.(5748059-S for R2.0.3 and
above)

8-6-22-1 Tools

• Common Phillips screwdrivers

8-6-22-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

8-6-22-3 Needed Manpower

• 1 person, 10 minutes + travel

8-142 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-22 Battery and SATA Connection PWA(continued)

8-6-22-4 Removal Procedure

Table 8-52: Removal Procedure for Battery and SATA Connection PWA

No. Steps Corresponding Graphic

1. Remove the internal box assy, refer to

8-6-9 ‘Internal Box Assy’ on page 8-88.

2. On the top of the internal box assy,

disconnect 3 cable connectors.

3. Unscrew 4 screws, then remove the

PWA.

8-6-22-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-22-6 Functionality checks

Perform the checks listed in ‘Check Battery and SATA

Connection PWA’ on page 8-238.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-143

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-23 CMOS Battery

Purpose: This is a description on how to remove and replace the
CMOS Battery.(5145407)

8-6-23-1 Tools

• Common Phillips screwdrivers

8-6-23-2 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

8-6-23-3 Needed Manpower

• 1 person, 22 minutes + travel

8-144 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-23 CMOS Battery(continued)

8-6-23-4 Removal Procedure

Table 8-53: Removal Procedure for CMOS Battery

No. Steps Corresponding Graphic

1. Remove the I/O PWA blanket, refer to

step1~3 of 8-6-14 ‘AP2M PWA’ on
page 8-108.

2. Remove the battery and disconnect 1

connector.

8-6-23-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-23-6 Functionality checks

Perform the checks listed in ‘Check CMOS Battery’ on

page 8-238.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-145

5718825-100 English Rev. 15 System view
Replacement Procedures

8-6-24 Battery Bracket

Purpose: This is a description on how to remove and replace the
battery bracket.(5755630-S for R2.0.3 and above)

8-6-24-1 Tools

• Common Phillips screwdrivers

8-6-24-2 Preparation

• Shut down the system and disconnect the power cord.

8-6-24-3 Needed Manpower

• 1 person, 5 minutes + travel

8-146 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Body Assy

8-6-24 Battery Bracket(continued)

8-6-24-4 Removal Procedure

Table 8-54: Removal Procedure for battery bracket (5755630-S for R2.0.3 and above)

No. Steps Corresponding Graphic

1. Remove the body front cover, refer to

8-6-3 ‘Body Front Cover’ on page 8-77.

2. Unscrew 1 screw with hand, then

remove the battery bracket.

8-6-24-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-6-24-6 Functionality checks

Perform the checks listed in ‘Check Battery Bracket’ on

page 8-238.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-147

5718825-100 English Rev. 15 System view
Replacement Procedures

8-7 Base Assy

Table 8-55: Base Assy Disassembly List

Part Description Page Number

Footrest Cover 8-148

Castor 8-150

Base 8-153

8-7-1 Footrest Cover

Purpose: This is a description on how to remove and replace the
Footrest cover.(5492264-S)

8-7-1-1 Tools

• Common Phillips screwdrivers

8-7-1-2 Preparation

• Shut down the system and disconnect the power cord.

8-7-1-3 Needed Manpower

• 1 person, 3 minutes + travel

8-148 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Base Assy

8-7-1-4 Removal Procedure

Table 8-56: Removal Procedure for Footrest Cover

No. Steps Corresponding Graphic

1. Unscrew 3 screws on the bottom and

then remove the Footrest cover.

8-7-1-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-149

5718825-100 English Rev. 15 System view
Replacement Procedures

8-7-1-6 Castor

Purpose: This is a description on how to remove and replace the

castor.(5444541-S)

8-7-1-7 Tools

• Common Phillips screwdrivers

8-7-1-8 Preparation

• Shut down the system and disconnect the power cord.

8-7-1-9 Needed Manpower

• 1 person, 5 minutes + travel

8-150 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Base Assy

8-7-1-10 Removal Procedure

Table 8-57: Removal Procedure for Castor

No. Steps Corresponding Graphic

1. Lock the castors in order to aviod the

system moving during the castor
change.

2. The removal of castor needs a wooden

wedge. The part number is 5483412
and it can be ordered by the user.

3. Settle the first groove of the wooden

wedge under the base chassis at
diagonal position of the castor which is
replaced.

4. Lift the system and settle the second

groove of the wooden wedge under the
base chassis.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-151

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-57: Removal Procedure for Castor

No. Steps Corresponding Graphic

5. Use Spanner to unscrew the castor and

remove it.

8-7-1-11 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-152 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Base Assy

8-7-1-12 Base

Purpose: This is a description on how to remove and replace the

Base.(5492246-S)

8-7-1-13 Tools

• Common Phillips screwdrivers

8-7-1-14 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

8-7-1-15 Needed Manpower

• 1 person, 45 minutes + travel

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-153

5718825-100 English Rev. 15 System view
Replacement Procedures

8-7-1-16 Removal Procedure

Table 8-58: Removal Procedure for Base

No. Steps Corresponding Graphic

1. Remove the Body Neck, refer to

8-6-8 ‘Body Neck’ on page 8-86.

2. Remove the integrated box, refer to

step 1~4 of 8-6-21 ‘Fan Assy with cable’
on page 8-139.

3. Put the system laying on the floor.

4. Make sure the two wheels on the floor

are lying down, then remove the 4
wheels.

8-154 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Base Assy

Table 8-58: Removal Procedure for Base

No. Steps Corresponding Graphic

5. Unscrew 3 screws and then remove the

foot rest.

6. Unscrew 4 screws.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-155

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-58: Removal Procedure for Base

No. Steps Corresponding Graphic

7. Remove the base.

8-7-1-17 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-156 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cable Kits

8-8 Cable Kits

Table 8-59: Cable Kit Disassembly List

Part Description Page Number

LCD cable kit 8-157

One box cable kit 8-161

One Box to KBD cable kit 8-165

8-8-1 LCD cable kit

Purpose: This is a description on how to remove and replace the
LCD cable kit.(5479054-S)

8-8-1-1 Needed Manpower

• 1 person, 25 minutes + travel

8-8-1-2 Tools

• Common Phillips screwdrivers

• 6mm Inner Hexangular Set

8-8-1-3 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-157

5718825-100 English Rev. 15 System view
Replacement Procedures

8-8-1-4 Removal Procedure

Table 8-60: Removal Procedure for LCD Cable Kit

Step Description Corresponding Graphic

1. Remove the LCD Panel Assy, refer

to 8-4-1 ‘LCD Panel Assy’ on
page 8-14.
If need to replace HDMI cable,
disconnect connector 1.
If need to replace DC power cable,
disconnect connector 2.

2. Remove the arm top cover.

8-158 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cable Kits

Table 8-60: Removal Procedure for LCD Cable Kit

Step Description Corresponding Graphic

3. If need to replace the HDMI cable,

disconnect connector 1.
If need to replace the DC power
cable, disconnect connector 2.

4. Remove the Touch Panel, refer to

8-5-1 ‘Touch Panel’ on page 8-22.

5. Remove the KBD top assy, refer to

8-5-3 ‘KBD Top Assy’ on page 8-29.

6. Remove the Arm support kit, refer

to 8-5-13 ‘Arm Support Kit’ on
page 8-58.

7. Loose the cable clips.

8. Remove the body back cover, refer

to 8-6-4 ‘Body Back Cover’ on
page 8-78.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-159

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-60: Removal Procedure for LCD Cable Kit

Step Description Corresponding Graphic

9. Disconnect the connector to remove

the HDMI cable.

8-8-1-5 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-8-1-6 Functionality checks

Perform the checks listed in ‘Check LCD cable kit’ on

page 8-234.

8-160 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cable Kits

8-8-1-7 One box cable kit

Purpose: This is a description on how to remove and replace

one box kit cable.(5479053-S)

8-8-1-8 Needed Manpower

• 1 person, 25 minutes + travel

8-8-1-9 Tools

• Common Phillips screwdrivers

8-8-1-10 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-161

5718825-100 English Rev. 15 System view
Replacement Procedures

8-8-1-11 Removal Procedure

Table 8-61: Removal Procedure for one box cable kit

No. Steps Corresponding Graphic

1. Remove the body left cover, refer to

8-6-5 ‘Body Left Cover’ on page 8-80.

2. Disconnect 2 connectors on the top of

the integrated box and remove the
SATA cable (5444463).

3. Disconnect 2 connectors on the top of

the integrated box and remove the
power cable (5462410).

4. Remove the internal box assy, refer to

8-6-9 ‘Internal Box Assy’ on
page 8-88.

5. Disconnect 2 connectors on I/O board

and remove the fan cables (5450642).

8-162 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cable Kits

Table 8-61: Removal Procedure for one box cable kit

No. Steps Corresponding Graphic

6. Loose the cable clips, unscrew 3

screws and disconnect two coneectors
to remove the DC power cable
(5453850).

7. Disconnect the BNC cable.

8. Loose the nut with spanner and

remove the BNC with cable (5441259).

9. Remove the I/O PWA bracket, refer to

step 1~3 of 8-6-13 ‘I/O Board PWA’ on
page 8-103.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-163

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-61: Removal Procedure for one box cable kit

No. Steps Corresponding Graphic

10. Disconnect 2 connectors to remove

the MISC cable (5443006).

8-8-1-12 Mounting Procedure

1. Install the new parts in the reverse order of removal.

8-8-1-13 Functionality checks

Perform the checks listed in ‘Check One box cable kit’ on

page 8-234.

8-164 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cable Kits

8-8-1-14 One Box to KBD cable kit

Purpose: This is a description on how to remove and replace the

one box to KBD cabke kit.(5479055-S)

8-8-1-15 Needed Manpower

• 1 person, 50 minutes + travel

8-8-1-16 Tools

• Common Phillips screwdrivers

• Allen/Unbraco/Torx wrench

8-8-1-17 Preparation

• Shut down the system and disconnect the power cord.

• Remove the battery. (For R2.x.x)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-165

5718825-100 English Rev. 15 System view
Replacement Procedures

8-8-1-18 Removal Procedure

Table 8-62: Removal Procedure for one box to KBD cabke kit

Step Description Corresponding Graphic

1. Unscrew 8 screws.

2. If need to replace DC cable to KBD

(5458647), disconnect connector 1.
If need to replace STD cable to KBD
(5443676), disconnect connector 2.

8-166 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cable Kits

Table 8-62: Removal Procedure for one box to KBD cabke kit

Step Description Corresponding Graphic

3. Remove the Touch Panel, refer to

8-5-1 ‘Touch Panel’ on page 8-22.
If need to replace DC cable
(5458647) to touch panel ,
disconnect connector 1.
If need to replace STD cable
(5443676) to touch panel ,
disconnect connector 2.
If need to replace LVDS_HDMI Cable
(5693411-S) to touch panel,
disconnect connector 3 (for R2.x.x).

4. On the KBD Top assy,

If need to replace STD cable
(5452187), disconnect connector 1.
If need to replace MSC cable
(5448555), disconnect connector 2.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-167

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-62: Removal Procedure for one box to KBD cabke kit

Step Description Corresponding Graphic

5. On the SUSB PWA board,

If need to replace STD cable
(5476281), disconnect conector 1.
If need to replace MSC cable
(5448555), disconnect conector 2.

6. Remove the Arm support kit, refer to

8-5-13 ‘Arm Support Kit’ on
page 8-58.

7. Loose the calb clips.

8. Remove the body back cover, refer to

8-6-4 ‘Body Back Cover’ on
page 8-78.

9. If need to replace MSC cable

(5448555), disconnect connector 1.
If need to replace STD cable
(5476281), disconnect connector 2.
If need to replace STD cable
(5452187), disconnect connector 3.

10. Remove the internal box assy , refer

to 8-6-9 ‘Internal Box Assy’ on
page 8-88

8-168 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cable Kits

Table 8-62: Removal Procedure for one box to KBD cabke kit

Step Description Corresponding Graphic

11. Disconnect STD cable (5476281) on

the I/O board.

8-8-1-19 Mounting Procedure

1. Install the new parts in the reverse order of removal.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-169

5718825-100 English Rev. 15 System view
Replacement Procedures

8-8-1-20 Cable clip SVC kit for power cable

Purpose: This is a description on how to remove and replace the

cable clip SVC kit for power cable.(5790989-S)

8-8-1-21 Needed Manpower

• 1 person, 5 minutes + travel

8-8-1-22 Tools

• Common Phillips screwdrivers

8-8-1-23 Preparation

• No need

8-170 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cable Kits

8-8-1-24 Removal Procedure

Table 8-63: Removal Procedure for cable clip SVC kit for power cable

Step Description Corresponding Graphic

1. Unscrew 2 screws from the old cable

clip to remove it.

2. Unscrew 2 screws on the power

cable socket.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-171

5718825-100 English Rev. 15 System view
Replacement Procedures

8-8-1-25 Mounting Procedure

CAUTION Ensure that the retaining clamp for the power plug is fixed
firmly.

1. Prepare the new cable clip SVC kit

for power cable.

2. For the C13M power cable, please

insert the pin into the No1 hole.

For the Volex power cable, please

insert the pin into the No2 hole.

8-172 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cable Kits

3. Screw 2 screws to fix the new cable

clip on the system.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-173

5718825-100 English Rev. 15 System view
Replacement Procedures

8-9 Cleaning the Trackball

WARNING DO NOT touch any boards with integrated circuits prior to

taking the necessary ESD precautions.
Always connect yourself, via an arm-wrist strap, to the advised
ESD connection point located on the rear of the Ultrasound
system (near the power connector).
Follow general guidelines for handling of electrostatic sensitive
equipment.

8-9-1 Manpower
One person, 10 minutes,

8-9-2 Tools
• Antistatic brush and/or antistatic vacuum cleaner

8-9-3 Preparations
To get access to the trackball for cleaning, you must perform the
following steps:
1. Power down the system.
2. Disconnect the mains power cable from the wall outlet.
Follow these links if you need more information: 4-2-3 ‘Power
off’ on page 4-8

8-174 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cleaning the Trackball

8-9-3-1 Clean the Trackball

Dust is often building up behind the ball, so it interferes with the

ball rotation and for optical trackballs the light used for sensing.
To get access for cleaning, you need to remove the ball.
The ball is held in position by the Dust Gasket.
1. Power off the system.
2. Rotate the dust gasket counterclockwise until it can be
removed from the keyboard.

Figure 8-31. Remove the retainer

3. Separate the trackball and the gasket. Wipe off any oil or
dust from the trackball, gasket and the trackball housing
using a cleaner or cotton swab.
4. Assemble the trackball and gasket, then put it into the
housing and rotate it clockwise until its notches are set in
the position.

CAUTION When cleaning, make sure not to spill or spray any liquid into
the trackball housing (keyboard or system).

8-9-4 Test the Trackball

Power up the and test that the trackball now works as intended.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-175

5718825-100 English Rev. 15 System view
Replacement Procedures

8-10 Cleaning the Air Filter

8-10-1 Manpower
One person, 5 minutes,

8-10-2 Tools
• None

8-10-3 Preparations
To get access to the air filter for cleaning, you must perform the
following steps:
1. Power down the system.
2. Disconnect the mains power cable from the wall outlet.
Follow these links if you need more information: 4-2-3 ‘Power
off’ on page 4-8

8-176 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Cleaning the Air Filter

8-10-3-1 Clean the Air Filter

1. Power off the system.

2. Pull out the air filter from the rear panel.

Figure 8-32. Remove the Air Filter

3. Dust the filter with a vacuum cleaner and/or wash it with a

mild soapy solution.
If washed, rinse and dry the filter before re-installation.
4. Pull back the air filter.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-177

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11 Loading the software

8-11-1 Purpose of this section

This section describes how to reinstall software on Vivid T8/
Vivid T8 Pro.

8-11-2 Customer provided prerequisite

• Formatted and labelled media for Images storage.
• Formatted and labelled media for Patient Archive and
Presets (User Defined Settings).
• Password for the user ADM.

8-11-3 Data Management - moving all images

CAUTION An error, or a power loss may occur.

Always backup the Patient Archive and the Presets (System
Configurations) before loading the software!
In order to complete a successful restore of the Patient
Database, as needed after a hard disk replacement, or if all the
content on the hard disk has been erased, the images must be
moved away from Vivid T8/Vivid T8 Pro before doing backup of
the Patient Database.
Depending on the ___location set-up, either move the images to a
remote server or to removable media like DVD or CD discs.

• Move the images to a remote server or to removable media.

For instructions, please see “Disk management” in the User
Manual/User Guide.

8-178 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Loading the software

8-11-4 Backing up the Patient Archive and System Configurations

CAUTION An error, or a power loss may occur.

Always backup the Patient Archive and the Presets (System
Configurations) before loading the software!
In order to complete a successful restore of the Patient
Database, as needed after a hard disk replacement, or if all the
content on the hard disk has been erased, the images must be
moved away from Vivid T8/Vivid T8 Pro before doing backup of
the Patient Database.
Depending on the ___location set-up, either move the images to a
remote server or to removable media like DVD or CD discs.

• Backup the Patient Archive and System Configurations.

For instructions, please see “Data Backup and Restore” in
the User Manual/User Guide.
NOTE: The system is able to back up the presets remotely.

8-11-5 Restoring up the Patient Archive and System Configurations

• For instructions, please see “Data Backup and Restore” in
the User Manual/User Guide.
NOTE: It is not suggested to manually delete the files in
D:\Idunn\target\resources\idunn\userdefs.
NOTE: The system is able to restore the presets remotely.

WARNING To avoid lacking of connecting to Local Archive, connecivity.res

and IPSave in D:\Idunn\target\resources\idunn\userdefs could
not be deleted. If they are deleted, refer to 7-7-4 ‘Rewrite the
Serial Number’ on page 7-50 to rewrite the serial number.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-179

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11-6 Recording important settings and parameters

8-11-6-1 Overview

CAUTION An error, or a power loss may occur.

It is considered to be best practice to always keep a record on
paper of the settings for the Vivid T8/Vivid T8 Pro. Verify if it is
current before you start to load software!

Always keep a record of the settings for the Vivid T8/Vivid T8

Pro on paper. Verify if it is current before starting a software
loading! If needed, record the settings.
This subsection includes descriptions for recording data from
the following screens:

8-180 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Loading the software

8-11-7 Loading the System Software (for R1.x.x)

WARNING While the software install procedure is designed to

preserve data, you should save any patient data, images,
system setups and customer presets to CD, DVD, USB
Flash Drive, or USB Hard Disk before doing a software
upgrade.
NOTE: Before loading the system software, please ensure that the
power can be continuously supplied and there is no risk of
power cut off during loading procedure.
There is one method to load the system software:
• Load the system software with USB memory stick.

8-11-7-1 Loading the System Software with USB memory stick

NOTE: While it is believed to be unnecessary, it would not hurt to

disconnect the system from the network and remove all
transducer.
NOTE: Please ensure AC adapter is connected during system upgrade!
NOTE: Serial number and option key are needed to be input after
loading the complete disk. The serial number about option key
MUST be the same as the ones before installation. Please
record the serial number and option key before installation.
1. Insert the USB memory stick labeled “System & Application
Software” to the system.
2. Properly turn off the scanner by momentarily pressing the
Power On/Off Switch. In System-Exit window, select
Shutdown to shutdown the system.
NOTE: If the system will not shutdown normally, hold down the
Power On/Off Switch until the light turns off.
3. Power on the system. The system will detect the USB
memory stick automatically.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-181

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11-7-1 Loading the System Software with USB memory stick(continued)

4. Press any key to continue when below message displays.

Figure 8-33. Upgrade message

5. Select one of the options for loading the system. Select

choice [a] to load the complete disk.

CAUTION If you select [a], ALL existing software and data will be erased.
If backup has not been performed, all data like Patient
Database, System Configuration and User Configurations
(Customer Presets) will be lost.

• To select [a], the complete disk will be loaded. This

option is recommended for application software
upgrade.
NOTE: When to select [a] to load complete disk, please ensure
that any patient data on the disk has been backed up.
• To select [b], only the bootable C: partition is loaded.
This option is intended for recovery of a system that will
not boot up. It is not recommended for application
software upgrade because during upgrade process, the
data on the system would possibly be impacted.
• To select [c] to quit system upgrade process.

8-182 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Loading the software

8-11-7-1 Loading the System Software with USB memory stick(continued)

Figure 8-34. System Software load instruction

WARNING While the software install procedure is designed to

preserve data, you should select choice [b] to format disk
C only.

NOTE: If selected to load C Disk only when loading the system

software, the system will display a screen to restore
Computer name before entering the scanning screen.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-183

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11-7-1 Loading the System Software with USB memory stick(continued)

6. System USB memory stick will be loading. Wait for the

software installation to complete. (Typical installation time:
5-10 minutes). Status bar on the screen indicates progress.

WARNING Do not interrupt the software loading at any time.

Figure 8-35. Loading status

7. After finish updating system, remove the USB memory stick

and press any key to shut down the system.
NOTE: If you do not remove the USB memory stick, the software
system loading process repeats when the system boots up.

Figure 8-36. System upgrade complete

8-184 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Loading the software

8-11-8 Loading the System Software (for R2.x.x)

WARNING While the software install procedure is designed to

preserve data, you should save any patient data, images,
system setups and customer presets to CD, DVD, USB
Flash Drive, or USB Hard Disk before doing a software
upgrade.
NOTE: Before loading the system software, please ensure that the
power can be continuously supplied and there is no risk of
power cut off during loading procedure.
There is one method to load the system software:
• Load the system software with USB memory stick.

8-11-8-1 Loading the System Software with USB memory stick

NOTE: While it is believed to be unnecessary, it would not hurt to

disconnect the system from the network and remove all
transducer.
NOTE: Please ensure AC adapter is connected during system upgrade!
NOTE: Serial number and option key are needed to be input after
loading the complete disk. The serial number about option key
MUST be the same as the ones before installation. Please
record the serial number and option key before installation.
1. Insert the USB memory stick labeled “System & Application
Software” to the system.
2. Power on the system. The system will detect the USB
memory stick automatically and the screen will show as
below:

Figure 8-37. Loading the files

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-185

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11-8-1 Loading the System Software with USB memory stick(continued)

3. As we have backed up the system configuration, press next

here.

Figure 8-38. Data backup confirmation

8-186 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Loading the software

8-11-8-1 Loading the System Software with USB memory stick(continued)

4. Select one of the options for loading the system.

Figure 8-39. Disk selection

CAUTION If you select [a], ALL existing software and data will be erased.
If backup has not been performed, all data like Patient
Database, System Configuration and User Configurations
(Customer Presets) will be lost.

• To select [a], the complete disk will be loaded. This

option is recommended for application software
upgrade.
NOTE: When selecting [a] to load complete disk, please ensure
that any patient data on the disk has been backed up.
• To select [b], only the bootable C: partition is loaded.
This option is intended for recovery of a system that will
not boot up. It is not recommended for application
software upgrade because during upgrade process, the
data on the system would possibly be impacted.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-187

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11-8-1 Loading the System Software with USB memory stick(continued)

• To select [c], only upgrade Application Software. This

option will only upgrade the application software and will
not backup the system.
NOTE: To load the system software with USB memory stick, it
will take about twenty minutes to complete the
procedure.
NOTE: To load the system software by software download, it
takes about ten hours to complete the procedure. The
software downloaded is about 6 GB. The actual time
required for software download varies with the network
condition.
NOTE: To load the system software with software reload, it will
take about twenty minutes to complete the procedure.
• To select [d], erase the complete disk. This option will
destroy all patient data.

WARNING Selection of [d] DOES NOT meet the GE Global Secure Wipe
Standard. Back up the data before executing.

WARNING While the software install procedure is designed to

preserve data, you should select choice [b] to format disk
C only.

8-188 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Loading the software

8-11-8-1 Loading the System Software with USB memory stick(continued)

5. Press Yes to continue.

• If you select [a], please follow Figure 8-40
• If you select [d], please follow Figure 8-41

Figure 8-40. Disk selection confirmation (1)

Figure 8-41. Disk selection confirmation (2)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-189

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11-8-1 Loading the System Software with USB memory stick(continued)

6. The system starts to upgrade. (for selection [a], [b], and [c])

Figure 8-42. System Upgrading (1)

NOTE: It needs about 30 minutes to finish the upgrading process.

7. The system starts to erase the complete disk. (for selection
[d])

Figure 8-43. System Upgrading (2)

8-190 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Loading the software

8-11-8-1 Loading the System Software with USB memory stick(continued)

8. After the process finished, remove the USB and click

Finish.

Figure 8-44. Finish Upgrading

9. Press OK to reboot the system. (If you select [b] in step 4,

you do not need this step.)

Figure 8-45. Information

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-191

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11-8-2 Rewrite the Serial Number

If selected to load the complete disk during the software loading

process, when powering the system, the system will indicate to
rewrite the serial number, refer to 7-7-4 ‘Rewrite the Serial
Number’ on page 7-50.

8-192 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Loading the software

8-11-9 Software Version check out

8-11-9-1 Functional Check-out

1. Power on Vivid T8/Vivid T8 Pro system and wait until

system booting to scanning screen.
NOTE: If selected to load C Disk only when loading the system
software, the system will display a screen to restore
Computer name before entering the scanning screen.
2. Press Config (F2) on the control panel.
3. Select the About -> System version and check whether
the software version is right.

Figure 8-46. Software version

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-193

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11-10 Option Strings Check

NOTE: After the system software loading completion, please check the
option strings to ensure that the options are activated and
working.
1. Reboot the system.
2. Press Config (F2) on the control panel.
3. Select Admin -> System Admin.
4. Ensure that all the installed option keys are displayed and
the status of Options are valid.
• The status “Valid” means the option keys are activated
and working.
• The status “disabled” means the option keys are not
activated and not working. Check if the option is
installed and if the serial number and option key are
correct.

Figure 8-47. Software Option

8-194 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Loading the software

8-11-11 Probe Recognition Check

NOTE: After the system software loading completion, please check to
ensure that the system can recognize the probes.
Plug in the probe. In scanning mode, the probe information is
displayed on the right top ___location of the screen. About the
probe specification for intended use on Vivid T8/Vivid T8 Pro.
Plug in at least one of each type of the probes and check if each
of the probes is recognized and the probe information is
displayed correctly.

Figure 8-48. Probe identification

8-11-12 Peripheral Device Check

Check to ensure that all the peripheral devices work properly.
For instruction of peripheral device check, 4-3-33 ‘Peripheral
checks’ on page 4-41 for more information.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-195

5718825-100 English Rev. 15 System view
Replacement Procedures

8-11-13 Reinstall DICOM Devices

Reinstall any DICOM devices used by the customers and check
to ensure these DICOM devices work properly.
The instruction about installing DICOM devices is not
incorporated in this manual. To access the instruction about
installing DICOM devices please refer to another manual Basic
User Manual. Please use the latest revision of this document.

8-196 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12 Software Reload

8-12-1 Confirm Backups for Patient Data and Presets

The system can format C Disk (system data disk )and reinstall
the system automatically. Although remote software does not
delete any presets or settings on the system since it reloads the
C:\partition only and application, it is recommended to follow
these steps:
• Contact the customer to allow enough lead time to back up
the system. Be sure no images are on the clipboard or in
opened exams.
• Be sure that the DICOM spooler is empty.
• Review the troubleshooting section to collect information for
future analysis (if you are troubleshooting loss of image or
patient data.)
• Be sure all USB printers and the footswitch are connected
and powered on. These USB devices will be automatically
installed during the base image load process.
• Remove all USB Hard Disk Drives and Flash Drives. Failure
to do so may result in a failure of the software reload
process and damage to the data on the USB device.
• Be sure the Customer has saved all Presets, both User
Defined and Service. This is precautionary in case the
presets need to be restored manually.
• Note any window’s type configurations, such as regional
settings, keyboards, and localization settings.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-197

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-2 System Reload procedure (for R1.x.x)

If the system running, please follow the steps below:
1. Click the icon in the status bar at the bottom of the
display screen. This icon links the user or the Filed Engineer
(FE) to the service login screen.
2. Select GE Service in option of User Level of GEMS Service
Home page and input correct password, press OK button.

Figure 8-49. Service Login Page

8-198 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-2 System Reload procedure (for R1.x.x)(continued)

3. Choose Configuration in Global Service Interface to active
Configuration functions.

Figure 8-50. Configuration Window

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-199

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-2 System Reload procedure (for R1.x.x)(continued)

4. Press SW Reload to invoke System Reload.

Figure 8-51. Invoke System Reload

5. Input the website http://reboot.key.health.ge.com:85/

uscgi-bin/welcomePage.pl in Internet Explore. The GEMS
Service Home page will display and input correct password
to log in.

Figure 8-52. Service Login

8-200 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-2 System Reload procedure (for R1.x.x)(continued)

6. After Service Login, the Challenge Response Generation
window will display.Input the Challenge String display in the
Invoke System Reload window of the system to the
Challenge String of the Internet Explore and then press
Submit Challenge.

Figure 8-53. Input Challenge String

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-201

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-2 System Reload procedure (for R1.x.x)(continued)

7. After pressing Submit Challenge, the Response String will
display on the Internet Explore and then input the Response
String in the Invoke System Reload window

Figure 8-54. Input Response String

8-202 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-2 System Reload procedure (for R1.x.x)(continued)

8. Press Submit Response.Reload system setup is successful,
then reboot the system to begin software reload.

Figure 8-55. Submit Response

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-203

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-2 System Reload procedure (for R1.x.x)(continued)

9. After the system finishes rebooting, the system begins to
reload the software. It will take several minutes to finish
reloading the system.

Figure 8-56. System Reload

NOTE: The Software USB stick loading process will implement

twice.The window will display twice.
After system reload, the system will reboot, then the system
will be back to scanning screen.
10. When powering on the system after reboot, it will indicate to
reboot the system. Reboot the system to restore the
computer name.

8-204 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-3 System Reload procedure (for R2.x.x)

If the system running, please follow the steps below:
1. Click the icon in the status bar at the bottom of the
display screen. This icon links the user or the Filed Engineer
(FE) to the service login screen.
2. Select GE Service in option of User Level of GEMS Service
Home page and input correct password, press OK button.

Figure 8-57. Service Login Page

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-205

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-3 System Reload procedure (for R2.x.x)(continued)

3. Choose Configuration in Global Service Interface to active
Configuration functions.

Figure 8-58. Configuration Window

8-206 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-3 System Reload procedure (for R2.x.x)(continued)

4. Press Disruptive Mode to set disruptive status. Press Yes.

Figure 8-59. Disruptive Mode

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-207

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-3 System Reload procedure (for R2.x.x)(continued)

5. Press SW Reload in the left column and Setup Software
Reload button to invoke System Reload.

Figure 8-60. Invoke System Reload

8-208 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-3 System Reload procedure (for R2.x.x)(continued)

6. When below screen displays, reboot the system to begin
Software Reload.

Figure 8-61. Reboot the system

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-209

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-3 System Reload procedure (for R2.x.x)(continued)

7. The system begins software reload.

Figure 8-62. Software Reload (1)

Figure 8-63. Software Reload (2)

8-210 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-3 System Reload procedure (for R2.x.x)(continued)

Figure 8-64. Software Reload (4)

8. When below screen shows “Reload successfully. Press any

key to continue...“, please press any key to continue.

Figure 8-65. Software Reload (5)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-211

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-3 System Reload procedure (for R2.x.x)(continued)

9. The system is setting packages, please wait.

Figure 8-66. System package setting

10. The package starts to update.

Figure 8-67. System package update

After the system finishes updating packages, it will reboot,

and then the system will be back to scanning screen.

8-212 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-4 Software Download

8-12-4-1 Software Download setting up

1. In the server side, select the device type in the DEVICE

TYPES, and then select the device which needs to upgrade
software from the device list.

Figure 8-68. Device Type

2. Then select Update software in the category of

SERVICE-> SOFTWARE DIRECTOR.

Figure 8-69. Update Software

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-213

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-4-1 Software Download setting up(continued)

3. The page of software package displays, select the proper
META* package file in the list. Then select SCHEDULE to
set a proper schedule to upgrade the software

Figure 8-70. Software Package

4. In the SCHEDULE page, click “+” icon to set up a schedule.

Figure 8-71. Software Schedule

8-214 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-4-1 Software Download setting up(continued)

5. Fill in the blanks and select Add

Figure 8-72. New Schedule

6. Select yes when the confirmation window shows up

Figure 8-73. Confirmation Window

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-215

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-4-1 Software Download setting up(continued)

7. Then the new-add schedule is shown on the SCHEDULE
page.

Figure 8-74. New-add Schedule

8. Select Refresh device files in the category of SERVICE->

FILE MANAGEMENT.

Figure 8-75. Refresh Device Files

8-216 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-4-1 Software Download setting up(continued)

9. In SCHEDULE page, select Schedule

Figure 8-76. Set Schedule

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-217

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-5 Software download and installation

Software Updates for the unit may be available for download
and installation. When a Software Update is available, a
message icon is displayed on the system exit window.
Only users with administrator rights are allowed to download
Software Updates. You first download the software, then install
the software. It is a two-step process.
Once the software installation has begun, the system is not
usable until the software installation is done. The installation can
take up to 45 minutes to complete. While installing, DO NOT
turn off system power. For this reason, you may want to perform
the software download one evening and then install the software
the next evening.
After the software installation is complete, you will be asked to
perform a few system functional checks to determine normal
system operation.
NOTE: A software download may take more than 1 hour (and may take
several hours), depending on local network conditions. During
this time, you cannot perform any other function. Please allow
sufficient time to complete the software download and
installation.
NOTE: Please ensure network connection when downloading software.
NOTE: After you press a software download button, it may take up to
three (3) seconds for the system to respond.
NOTE: Software Updates through the GE service platform may not be
available in all countries.
You receive notification of available software updates via the
envelope icon that appears in the status bar on the bottom of the
monitor.
NOTE: To update the software, you must login with administrator
privileges.

8-218 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-5 Software download and installation(continued)

1. Press the on/off button on the control panel. The Exit dialog
window with software download displays.

Figure 8-77. System - Exit Dialog Window

• Decline: You decline the software download; the

software is not downloaded, no update will be
performed. The software download will not occur and
you will not be informed about this package again.
• Download: Starts the software download.
2. Select Download. A pop-up screeen is displayed to ask the
operator to confirm the software download.

Figure 8-78. Start Download

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-219

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-5 Software download and installation(continued)

3. Select Download.
The download process starts. The progression of the
download process is displayed.

Figure 8-79. Download Process

NOTE: The download step can be paused. While paused, you can
return to normal operation. However, once the software
installation has begun, the system is not usable until the
software installation is done. While installing, DO NOT turn
off system power.
NOTE: A typical software update of about 600 Mb may take up to
45 minutes to download, but times may vary depending on
your ___location and network connection.
• Pause: Pauses the software download process. If you
select Pause, you can cancel out of this dialog and
return to normal scanning or you can power off the
scanner. A paused download can be resumed by
logging in as Administrator, pressing the power switch,
and selecting Resume.
• Resume: Press Resume to continue the software
download.

8-220 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-5 Software download and installation(continued)

4. The following dialog is displayed when the software
download is complete. Select Install.

Figure 8-80. Software Ready To Be Installed

• Decline: DO NOT install the downloaded software; no

software upgrade will be performed. If you decline this
installation, you WILL NOT be offered the chance to
install this software package again. You can contact with
GE Service Engineer to perform the install at a later
time.
Multiple screens appear during the software installation
process. DO NOT interrupt this process AND follow
instructions as they appear on the display.
5. A pop-up screen is displayed to ask the operator to confirm
the software installation. Press OK to install the software.

Figure 8-81. Software Installation

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-221

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-5 Software download and installation(continued)

6. The system indicates to reboot the system after the
installation is complete. After the installation complete,
select Shutdown and then press On/Off button to reboot
the system.
Multiple screens appear during the software installation
process. DO NOT interrupt this process, and follow the
instructions as they appear on the display.
NOTE: A typical installation may take up to 15 minutes.
7. When the system starts up after the software installation has
finished, press On/Off button and then select Verify.

Figure 8-82. Verify Software Installation

8-222 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-5 Software download and installation(continued)

8. The new software verification checklist is displayed, this
dialog is critical. You MUST perform software verification
after downloading and installing the new software.

Figure 8-83. New Software Verification Checklist

CAUTION Perform a check for all the features listed. You MUST
ensure that the entire system functions normally as
expected.
These verification results are tracked for regulatory
purposes, sent back to GE for tracking, and approved with
your signature.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-223

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-5 Software download and installation(continued)

9. As you verify that each feature works correctly, select
“Passed.” If all features work correctly and “Passed” is filled
in for all features, type your signature and press OK. The
system is now ready for use.

WARNING However, if any of the features DO NOT function as

expected, you need to select “Failed” for this feature. Type
your signature and press OK. Then the System-Exit
Window is displayed, select Exit and then reboot the
system, the system will return to the previous software
version.

8-224 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-6 Installation Wizard (for R2.x.x)

Installation wizard is a function to enable the operator to
configure some common system settings when turning on the
system for the first time after the software installation.
For Vivid T8, you can also enter Installation Wizard by clicking
the IW icon at the bottom.

Figure 8-84. Enter Installation Wizard

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-225

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-6 Installation Wizard (for R2.x.x)(continued)

1. Select the appropriate language for system language and
keyboard language from the drop-down list.

Figure 8-85. System Language settings (1)

• If you do not change the language, press Next to

continue.
• If you change the language setting, press OK to restart
the system.

Figure 8-86. System Language settings (2)

NOTE: If you press Previous, you will go to the previous page.

8-226 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-6 Installation Wizard (for R2.x.x)(continued)

2. This screen shows the hospital and time information, and
you can set the system date and time here.

Figure 8-87. General Information

3. Press Next to continue.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-227

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-6 Installation Wizard (for R2.x.x)(continued)

4. The Network Information screen shows the configuration
of wireless and local network:

Figure 8-88. Network Information (1)

8-228 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-6 Installation Wizard (for R2.x.x)(continued)

Figure 8-89. Network Information (2)

Table 8-64: Network settings

Preset Parameter Description

Enable DHCP Select to set TCP/IP.

5. Press Next to continue.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-229

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-6 Installation Wizard (for R2.x.x)(continued)

6. The Insite Information screen shows the configuration of
Agent and Proxy.

Figure 8-90. Insite Information

7. After having set the Insite Information, press Next to

continue.

8-230 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Software Reload

8-12-6 Installation Wizard (for R2.x.x)(continued)

8. The DICOM screen shows the configuration of DICOM:

Figure 8-91. DICOM settings

Table 8-65: DICOM Worklist settings

Preset Parameter Description

Select Device Select the device from the drop-down list.

Configuration Select the configuration from the drop-down list.

Select DICOM You can modify, add or remove the selected DICOM.

AE Title Type the calling AE Title.

Port Type the port.

9. Press Next to continue.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-231

5718825-100 English Rev. 15 System view
Replacement Procedures

8-12-6 Installation Wizard (for R2.x.x)(continued)

10. This screen shows the report of the previous settings. You
can export it to the database.

Figure 8-92. Summary Information

Press Export and select the ___location where you want to

store the report.

Figure 8-93. Export Summary

11. Press Exit to exit Installation Wizard.

8-232 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Check after FRU Replacement

8-13 Check after FRU Replacement

8-13-1 Overview
This section provides the information for check after FRU
replacement.
• Perform required Functional and/or Leakage Current tests
based upon the FRU being replaced.
Equipment passed all required tests and is ready for use.
• Clarify the scripts to debrief a Service Dispatch using your
pole's dispatch tool. Use this script in the Service
Comments when debriefing a Service Dispatch.
Leakage Current meets allowable limits. Equipment passed
all required tests and is ready for use.

8-13-2 Submitting a Replacement Procedure Report

After performing a Vivid T8/Vivid T8 Pro Replacement
Procedure, if all required Functions Checks passed successfully,
proceed as follows to submit a Debrief Script to the GE Service
System:
• Using your pole’s Dispatch Tool, enter the following script in
the Service Comments when debriefing a Service Dispatch.
Vivid T8/Vivid T8 Pro Proprietary Service Manual, Direction
5718825-100 English, Rev. 15 - per Table 8-66 on
page 8-234. Equipment passed all required tests/checks
and is ready for use.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-233

5718825-100 English Rev. 15 System view
Replacement Procedures

8-13-3 Functional Test Matrix

Table 8-66: Functional Test of Vivid T8/Vivid T8 Pro

Description Diagnostics Functional and/or Leakage Current Tests

Basic Functional Check Arm Support Kit • 4-3-35 ‘Mechanical Functions Checks’ on
Checks Check Flexible Arm page 4-41
Check Internal Box Assy • 4-2-2 ‘Power ON/Boot Up’ on page 4-5
Check Internal Battery • 4-2-3 ‘Power off’ on page 4-8
Check ACDC Module • 4-3-26 ‘Probe/Connectors Check’ on page 4-37
Check I/O Board PWA • 4-2-4 ‘LCD Monitor position adjustment’ on
Check WPWR PWA page 4-10
Check Relay Assy • 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
Check CWD PWA • 4-3-13 ‘M Mode Checks’ on page 4-28
Check One box cable kit • 4-3-17 ‘Color Mode Checks’ on page 4-29
• 4-3-21 ‘PW/CW Doppler Mode Checks’ on
page 4-33
• 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-3-25 ‘Basic Measurements’ on page 4-36
• 4-3-28 ‘Cineloop Check’ on page 4-40

LCD Assy Check LCD Test Pattern • 4-3-35 ‘Mechanical Functions Checks’ on
page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• 4-3-26 ‘Probe/Connectors Check’ on page 4-37
• 4-2-4 ‘LCD Monitor position adjustment’ on
page 4-10
• Check LCD Test Pattern in Utility-> Test Pattern

LCD Cable Check LCD cable kit • 4-3-35 ‘Mechanical Functions Checks’ on
page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• 4-3-26 ‘Probe/Connectors Check’ on page 4-37
• 4-2-4 ‘LCD Monitor position adjustment’ on
page 4-10

8-234 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Check after FRU Replacement

Table 8-66: Functional Test of Vivid T8/Vivid T8 Pro

Description Diagnostics Functional and/or Leakage Current Tests

Keyboard Assy Check Touch Panel • 4-3-35 ‘Mechanical Functions Checks’ on

Check Speaker page 4-41
Check SUSB PWA-USB Board • 4-2-2 ‘Power ON/Boot Up’ on page 4-5
Check Internal ECG Cable • 4-2-3 ‘Power off’ on page 4-8
Check ECG Board • 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
Check Power and Freeze button • 4-3-13 ‘M Mode Checks’ on page 4-28
with cable kit • 4-3-17 ‘Color Mode Checks’ on page 4-29
Check AN Keyboard • 4-3-21 ‘PW/CW Doppler Mode Checks’ on
Check Main Keyboard PWA page 4-33
Check KBD Bottom • 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-3-25 ‘Basic Measurements’ on page 4-36
• 4-3-28 ‘Cineloop Check’ on page 4-40
• Press Patient key to check if system can go to
Patient screen.
• Press Print Key (Factory default settings) to see if
the system can store images
• Press Comments key to see if can input
comments via AN keys

KBD Top Assy Check KBD Top Assy • 4-3-35 ‘Mechanical Functions Checks’ on
Check KBD Top Cover page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
• 4-3-13 ‘M Mode Checks’ on page 4-28
• 4-3-17 ‘Color Mode Checks’ on page 4-29
• 4-3-21 ‘PW/CW Doppler Mode Checks’ on
page 4-33
• 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-3-25 ‘Basic Measurements’ on page 4-36
• 4-3-28 ‘Cineloop Check’ on page 4-40
• Press Patient key to check if system can go to
Patient screen.
• Press Print Key (Factory default settings) to see if
the system can store images
• Press Comments key to see if can input
comments via AN keys

Trackball Assy Check Trackball • 4-3-35 ‘Mechanical Functions Checks’ on

page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• Move the trackball to see if it moves smoothly

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-235

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-66: Functional Test of Vivid T8/Vivid T8 Pro

Description Diagnostics Functional and/or Leakage Current Tests

TMST Assy Check WMST PWA • 4-3-35 ‘Mechanical Functions Checks’ on

page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• Connect 2 probes to the probe ports, do ‘Probe/
Connectors Check’ on both of them and press
probe key to switch between them.
• 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
• 4-3-13 ‘M Mode Checks’ on page 4-28
• 4-3-17 ‘Color Mode Checks’ on page 4-29
• 4-3-21 ‘PW/CW Doppler Mode Checks’ on
page 4-33
• 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-3-25 ‘Basic Measurements’ on page 4-36
• 4-3-28 ‘Cineloop Check’ on page 4-40

PFPC Assy • 4-3-35 ‘Mechanical Functions Checks’ on

page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• Connect 2 probes to the probe ports, do ‘Probe/
Connectors Check’ on both of them and press
probe key to switch between them.
• 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
• 4-3-13 ‘M Mode Checks’ on page 4-28
• 4-3-17 ‘Color Mode Checks’ on page 4-29
• 4-3-21 ‘PW/CW Doppler Mode Checks’ on
page 4-33
• 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-3-25 ‘Basic Measurements’ on page 4-36
• 4-3-28 ‘Cineloop Check’ on page 4-40

CWD Assy • 4-3-35 ‘Mechanical Functions Checks’ on

page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• Connect 2 probes to the probe ports, do ‘Probe/
Connectors Check’ on both of them and press
probe key to switch between them.
• 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
• 4-3-13 ‘M Mode Checks’ on page 4-28
• 4-3-17 ‘Color Mode Checks’ on page 4-29
• 4-3-21 ‘PW/CW Doppler Mode Checks’ on
page 4-33
• 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-3-25 ‘Basic Measurements’ on page 4-36
• 4-3-28 ‘Cineloop Check’ on page 4-40

8-236 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Check after FRU Replacement

Table 8-66: Functional Test of Vivid T8/Vivid T8 Pro

Description Diagnostics Functional and/or Leakage Current Tests

Harddisk Assy Check Hardisk Assy • 4-3-35 ‘Mechanical Functions Checks’ on

page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• Connect 2 probes to the probe ports, do
4-3-26 ‘Probe/Connectors Check’ on page 4-37
on both of them and press probe key to switch
between them.
• 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
• 4-3-13 ‘M Mode Checks’ on page 4-28
• 4-3-17 ‘Color Mode Checks’ on page 4-29
• 4-3-21 ‘PW/CW Doppler Mode Checks’ on
page 4-33
• 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-5-1 ‘Software Configuration Checks’ on
page 4-44
• 4-3-28 ‘Cineloop Check’ on page 4-40

CPU Module/ Check CPU Assy • 4-3-35 ‘Mechanical Functions Checks’ on

Memory Module page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
• 4-3-13 ‘M Mode Checks’ on page 4-28
• 4-3-17 ‘Color Mode Checks’ on page 4-29
• 4-3-21 ‘PW/CW Doppler Mode Checks’ on
page 4-33
• 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-3-25 ‘Basic Measurements’ on page 4-36
• 4-3-28 ‘Cineloop Check’ on page 4-40
• 4-5-1 ‘Software Configuration Checks’ on
page 4-44
• Press Patient key to enter into patient screen and
build a new patient to see if it works, refer to
Chapter4 in Basic User Manual.

Left/Right Fan Check Fan Assy with cable • 4-3-35 ‘Mechanical Functions Checks’ on
Assy page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8

Handle Assy Check Rear Handle • 4-3-35 ‘Mechanical Functions Checks’ on

page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-237

5718825-100 English Rev. 15 System view
Replacement Procedures

Table 8-66: Functional Test of Vivid T8/Vivid T8 Pro

Description Diagnostics Functional and/or Leakage Current Tests

SCNT FPC Check SCNT FPC • 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
• 4-3-13 ‘M Mode Checks’ on page 4-28
• 4-3-17 ‘Color Mode Checks’ on page 4-29
• 4-3-21 ‘PW/CW Doppler Mode Checks’ on
page 4-33
• 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-3-25 ‘Basic Measurements’ on page 4-36
• 4-3-28 ‘Cineloop Check’ on page 4-40

Battery and Check Battery and SATA • 4-2-2 ‘Power ON/Boot Up’ on page 4-5
SATA Connection PWA • 4-2-3-2 ‘Battery Status’ on page 4-9
Connection
PWA

AP2M PWA Check AP2M PWA • 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8

CMOS Battery Check CMOS Battery Power on the system. Check that the current date
and time is later than the date and time of last
bootup.

Battery Bracket Check Battery Bracket • Try to move the battery bracket and the battery
bracket is securely fixed and is not loose.
• 4-2-3-2 ‘Battery Status’ on page 4-9

Loading Base • 4-3-35 ‘Mechanical Functions Checks’ on

Image Software page 4-41
• 4-2-2 ‘Power ON/Boot Up’ on page 4-5
• 4-2-3 ‘Power off’ on page 4-8
• 4-3-8 ‘2D Mode (B mode) Checks’ on page 4-26
• 4-3-13 ‘M Mode Checks’ on page 4-28
• 4-3-17 ‘Color Mode Checks’ on page 4-29
• 4-3-21 ‘PW/CW Doppler Mode Checks’ on
page 4-33
• 4-3-23 ‘Tissue Velocity Imaging (TVI) Checks’ on
page 4-35
• 4-3-25 ‘Basic Measurements’ on page 4-36
• 4-3-28 ‘Cineloop Check’ on page 4-40
• 4-5-1 ‘Software Configuration Checks’ on
page 4-44
• Press Patient key to enter into patient screen and
build a new patient to see if it works, refer to
Chapter4 in Basic User Manual

8-238 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Used Media and Used Parts Disposal

8-14 Used Media and Used Parts

Disposal

WARNING The waste of electrical and electronic equipment must not be

disposed as unsorted municipal waste and must be collected
separately.
Please contact the manufacturer or other authorized disposal
company to decommission your equipment.

1. Properly dispose of all old or used parts and media

according to current policies and procedures. Never keep
old software or leave old software at the customer site.
2. Ensure that no Proprietary Material, such as this installation
manual and the Vivid T8/Vivid T8 Pro Proprietary Manual,
are left at the customer.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 8-239

5718825-100 English Rev. 15 System view
Replacement Procedures

8-240 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Chapter 9

Renewal Parts

This chapter lists the renewal parts available for the

Vivid T8/Vivid T8 Pro.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-1

5718825-100 English Rev. 15 System view
Renewal Parts

9-1 Overview

9-1-1 Contents in this chapter

• List of Abbreviations
• Renewal Parts Lists

9-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 List of Abbreviations

9-2 List of Abbreviations

Table 9-1: List of Abbreviations

ABBREVIATION DESCRIPTION

3D THREE DIMENSIONAL

Assy ASSEMBLY

FRU 1 Replacement part available in part hub

FRU 2 Replacement part available from the manufacturer (lead

time involved)

KBD Keyboard

LCD Liquid Crystal Display

BnV Brightness and Volume

TMST Master Board

HW Hardware

SW Software

ME Mechanical

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-3

5718825-100 English Rev. 15 System view
Renewal Parts

9-3 Renewal Parts Lists

9-3-1 AC Power Cord

Table 9-2: AC Power Cord

Part
Item Number Part Name Quantity FRU

001 5177123-2 AC Power Cord Europe 1 1

002 5176304-2 AC Power Cord China 1 1

003 5176773-2 AC Power Cord India 1 1

004 5177195-2 AC Power Cord Argentina 1 1

005 5176907-2 AC Power Cord UK 1 1

006 5177153-2 AC Power Cord Denmark 1 1

007 5177154-2 AC Power Cord Switzerland 1 1

008 5177187-3 AC Power Cord Australia 1 1

009 5177146-2 AC Power Cord USA 1 1

010 5400868-2 AC Power Cord Brazil 1 1

011 5176753-2 AC Power Cord Israel 1 1

012 5177126-2 AC Power Cord Japan 1 1

9-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

9-3-2 Operator Console Assy

The following figure illustrates what is the front side (1), left side
(2), back/rear side (3), right side (4) of the system.

Figure 9-1. Operator Console Assy

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-5

5718825-100 English Rev. 15 System view
Renewal Parts

9-3-2 Operator Console Assy(continued)

LCD Assy

Keyboard
Assy

Body Assy

Base Assy

Figure 9-2. Front view of the system

9-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

9-3-2 Operator Console Assy(continued)

Table 9-3: Renewal Parts list

Item Section Page Number

1 LCD Assy 9-13

2 Keyboard Assy 9-14

3 Body Assy 9-20

4 Base Assy 9-12

5 Accessories and Cable Kits 9-31

6 Probe 9-36

7 Peripheral 9-38

8 AC Power Cord 9-4

9 Manuals 9-41

9-3-3 LCD Assy

LCD Assy

Figure 9-3. LCD Assy

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-7

5718825-100 English Rev. 15 System view
Renewal Parts

9-3-4 Keyboard Assy

R1/R2 Flexible
ARM

R1 Touch Panel

R1/R2 Probe
holder kit

R1/R2 KBD Top

Cover

R1 Internal ECG
cable

Figure 9-4. Keyboard Assy (1)

R1/R2 Rear Handle

R1/R2 Gel Holder

R1/R2 AN KBD

R1/R2 1.5 inch trackball with

cable

R1/R2 Body Neck

Figure 9-5. Keybaord Assy (2)

9-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

9-3-4 Keyboard Assy(continued)

R1 KBD Top Assy

R1/R2 SUSB PWA-USB
Board

R1 Main KBD PWA

R1 ECG PWA

R1/R2 Power and Freeze

button with cables
R1/R2 KBD Bottom
For Vivid T8 R1.x.x

R1 KBD Top Assy

R1/R2 SUSB PWA-USB
Board

R1 Main KBD PWA

R1 ECG PWA

R1/R2 Power and Freeze

button with cables
R1/R2 KBD Bottom
For Vivid T8 R2.x.x

Figure 9-6. Keyboard Assy (3)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-9

5718825-100 English Rev. 15 System view
Renewal Parts

9-3-5 Body Assy

R1 Body Right Cover

R1 Body Front Cover

Figure 9-7. Body cover (1)

R1 Body Top Cover

R1 Body Left Cover

R1 Body Back Cover

Figure 9-8. Body cover (2)

9-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

9-3-5 Body Assy(continued)

R1 Internal One Box Assy

Figure 9-9. Internal One Box Assy (1)

R2 Internal battery

R2 SFPC PWA

R1 IO Board PWA

R1 ACDC module

Figure 9-10. Internal One Box Assy (2)

R1/R2 Fan Assy with cable

R1 CPU Assy

R1/R2 WMST PWA

R1 WPWR PWA

Figure 9-11. Internal One Box Assy (3)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-11

5718825-100 English Rev. 15 System view
Renewal Parts

9-3-6 Base Assy

Vivid T8/Vivid T8 Pro R1/R2

Footrest cover

Vivid T8/Vivid T8 Pro R1/R2

Base

Vivid T8/Vivid T8 Pro R1/R2

Castors

Figure 9-12. Internal One Box Assy (3)

9-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

9-3-7 LCD Assy

Table 9-4: LCD Assy

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

200 5495632-S Vivid T8/Vivid T8 Pro HW R2.0.3 and RP

19” LCD Assy above
1280 x 1024

5766820 Vivid T8 R2 21.5” R2.1.0 and

LCD Assy above
1920 x 1080

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-13

5718825-100 English Rev. 15 System view
Renewal Parts

9-3-8 Keyboard Assy

Table 9-5: Keyboard Assy

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

300 5473834-S R1/R2 Rear ME R1.x.x/R2.x.x RP

Handle

301 5492247-S R1/R2 Body ME R1.x.x/R2.x.x RP

Neck

302 5495622-S R1 Touch Panel ME R1.x.x RP

303 5495623-2- Vivid T8 R2 ME R2.x.x RP

S Touch Panel

9-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-5: Keyboard Assy

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

304 5421536-S R1 KBD Top HW R1.x.x RP

Assy

305 5694059-2- R2 KBD Top HW R2.x.x RP

S Assy

306 5487113-S R1/R2 KBD Top ME R1.x.x/R2.x.x RP

Cover

307 5492248-S R1/R2 KBD ME R1.x.x/R2.x.x RP

Bottom

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-15

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-5: Keyboard Assy

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

308 5457733-S R1/R2 Probe ME R1.x.x/R2.x.x RP

holder kit

309 5450377-S R1/R2 Gel ME R1.x.x/R2.x.x RP

Holder

310 5498252-2- R1/R2 AN KBD ME R1.x.x/R2.x.x RP

S

311 5483422-S R1 Main KBD HW R1.x.x RP

PWA

312 5720091-2- R2 Vivid T8 HW R2.x.x RP

S New KBD PWA

313 5494374-S R1/R2 Power HW R1.x.x/R2.x.x RP

and Freeze
button with
cables

9-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-5: Keyboard Assy

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

314 5494285-S Vivid T8/Vivid ME R1.x.x/R2.x.x RP

T8 Pro R1/R2
Function key
and button kits

315 5487238-S Vivid T8/Vivid ME R1.x.x/R2.x.x RP

T8 Pro R1/R2
Speaker

316 5447726-S R1/R2 1.5 inch ME R1.x.x/R2.x.x RP

trackball with
cable

317 5450942-S R1/R2 SUSB HW R1.x.x/R2.x.x RP

PWA-USB
Board

318 S2419018- R1 ECG PWA HW R1.x.x RP

3

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-17

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-5: Keyboard Assy

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

319 5661225-S R2 ECG Board HW R2.x.x RP

PWA for CVUS

320 S2419034- R1 Internal HW R1.x.x RP

2 ECG cable

321 5718361-S R2 ECG Cable HW R2.x.x RP

SVC for
interface
conversion

322 5495634-S Vivid T8/Vivid ME 5495634-1-S can replace part R1.x.x/R2.x.x RP

T8 Pro R1/R2 5495634-S
ARM support kit

323 5495634-1- Vivid T8/Vivid ME 5495634-S can be replaced by part R1.x.x/R2.x.x/ RP

S T8 Pro R1/R2 5495634-1-S R3.x.x
ARM support kit

9-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-5: Keyboard Assy

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

324 5498520 R1/R2 Flexible ME R1.x.x/R2.x.x RP

ARM

325 5722513 R1/R2 Flexible ME R1.x.x/R2.x.x RP

ARM

326 5489678-S Probe cable ME R1.x.x/R2.x.x

hook_SVC

327 5456424-S Spark Air Filter ME R1.x.x/R2.x.x

328 5798893-S Blank AQUA AN ME R1.x.x/R2.x.x

key film

329 5457698-S R1/R2 Arm Fix ME R1.x.x/R2.x.x

Cover

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-19

5718825-100 English Rev. 15 System view
Renewal Parts

9-3-9 Body Assy

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

400 5492266-S R1 Body Top ME R1.x.x/R2.x.x RP

Cover

401 5448351-S R1 Body Back ME R1.x.x/R2.x.x RP

Cover

402 5421619-S R1 Body Front ME R1.x.x/R2.x.x RP

Cover

9-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

403 5449143-S R1 Body Left ME R1.x.x/R2.x.x RP

Cover

404 5453635-S R1 Body Right ME R1.x.x/R2.x.x RP

Cover

405 5495619-2-S R1 Internal One HW 5495619-2-S can be R1.x.x RP

Box Assy replaced by part
5495619-3-S

5730658 HW For Upgraded

R2

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-21

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

406 5495619-4-S Vivid T8 R2 HW R2.01/R2.0.2 RP

Internal One
Box ASSY

5495619-5-S Vivid T8 R2 HW R2.0.3 and

Internal One above
Box ASSY

407 5461693-S R1 CPU Assy ME R1.x.x RP

408 5717877-S R2 CPU ME R2.x.x RP

MODULE
1020E for
AQUA R2

9-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

409 5448057-S Vivid T8/Vivid HW R1.x.x

T8 Pro R1
SCNT
FPC_MST to
Relay

5448057-2-S Vivid T8/Vivid HW R2.0.3 and RP

T8 Pro R2 above
SCNT
FPC_MST to
Relay

410 5442429-S Vivid T8/Vivid HW R1.x.x RP

T8 Pro R1
SFPC
PWA_MST to
IO

411 5442429-3-S R2 SFPC PWA HW R2.x.x RP

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-23

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

412 5457976-S Vivid T8/Vivid HW R1.x.x/R2.0.1/ RP

T8 Pro R1/R2 4 R2.0.2
Probe Relay
Assy

5457976-3-S Vivid T8/Vivid HW R2.0.3 and

T8 Pro R2 4 above
Probe Relay
Assy

413 5506731-5-S R1/R2 WMST HW R1.0.4 and RP

PWA above

5737788-4-S R2.0.X and

above

414 5451284 R2 Internal HW 5451284 can be replaced by RP

battery part 5451284-2

415 5451284-2 R2 Internal HW 5451284-2 can replace RP

battery 5451284

9-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

416 5537639-S Vivid T8/Vivid HW RP

T8 Pro R1/R2
CWD

417 5537638-S R1 WPWR HW R1.x.x RP

PWA

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-25

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

418 5537638-2-S Vivid T8 R2 HW R2.0.1/R2.0.2 RP

WPWR

5537638-3-S Vivid T8 R2 HW R2.0.3 and RP

WPWR above

419 5456663-S R1 IO Board HW R1.x.x RP

PWA

9-26 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

420 5456663-4-S Vivid T8 R2 IO HW R2.x.x RP

board PWA

5456663-5-S Vivid T8 R2 IO HW R2.0.3 and

board PWA above

421 5440428-S R1 ACDC HW R1.x.x RP

module

422 5440428-2-S Vivid T8 R2 HW R2.x.x RP

ACDC module

423 5448554-S R1/R2 Fan ME R1.x.x/R2.x.x RP

Assy with cable

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-27

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

424 5487561-S R1 500G HDD HW R1.x.x RP

425 5694056-S R1/R2 HDD kit HW R1.x.x/R2.0.1/ RP

for AQUA R2.0.2

5755632-S R2 HDD kit for HW R2.0.3 and RP

AQUA above

426 5748059-S Battery and HW R2.0.3 and RP

SATA above
Connection
PWA

427 5745862-S AP2M PWA HW R2.0.3 and RP

above

428 5145407 CMOS Battery HW R1.x.x/R2.x.x RP

9-28 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-6: Body Assy

Part Part Corresponding Compatible Repl

Item Number Description Type graphics With Proc

429 5755630-S Battery Bracket ME R2.0.3 and RP

above

430 5790989-S Cable clip SVC ME R2.0.3 and RP

kit for Power above
cord

5809956-S Black pull out ME

protection for
power cord

Note:
5809956-S is
latest version
and much
stronger than
5790989-S,
please order
5809956-S for
service
activities.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-29

5718825-100 English Rev. 15 System view
Renewal Parts

9-3-10 Base Assy

Table 9-7: Base Assy

Part Descriptio Part Compatible Repl

Item Number n Type Corresponding graphics With Proc

500 5492246-S Vivid T8/Vivid ME R1.x.x/R2.x.x RP

T8 Pro R1/R2
Base

501 5492264-S Vivid T8/Vivid ME R1.x.x/R2.x.x RP

T8 Pro R1/R2
Footrest
cover

502 5497606-S Vivid T8/Vivid ME R1.x.x/R2.x.x RP

T8 Pro R1/R2
Castors

9-30 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

9-3-11 Accessories and Cable Kits

Table 9-8: Accessories and Cable Kits

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

600 5479053-S Vivid T8/Vivid T8 Pro HW R1.x.x/R2.x.x RP

R1/R2 one box cable
kit

5453850 R1/R2 DC Power HW R1.x.x/R2.x.x

cable, ACDC output

5457894 R1/R2 MISC cable, HW R1.x.x/R2.x.x

WMST to DC4D and
SRLY

5441259 R1/R2 BNC with HW R1.x.x/R2.x.x

cable

5443006 R1/R2 MISC cable, HW R1.x.x/R2.x.x

WPWR to WMST

5450642 R1/R2 FAN cable IO HW R1.x.x/R2.x.x

(IO board cable)

5444463 R1/R2 SATA cable HW R1.x.x/R2.x.x

HDD-box

601 5479052-S Cable kit for ACDC HW R1.x.x/R2.x.x

input

5459380 ACDC Power Cable HW R1.x.x/R2.x.x

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-31

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-8: Accessories and Cable Kits

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

602 5462410 R1/R2 Power cable HW R1.x.x/R2.x.x

HDD-box

603 5693410-S Vivid T8 R2 Power HW R2.x.x

Cable B Type

604 5479054-S Vivid T8/Vivid T8 Pro HW R1.x.x/R2.x.x RP

R1/R2 LCD cable kit

5444525 R1/R2 DC cable, HW R1.x.x/R2.x.x

LCD short extension

5476238 R1/R2 DC cable, HW R1.x.x/R2.x.x

LCD long extension

5476006 R1/R2 STD cable, HW R1.x.x/R2.x.x

HDMI

5476007 R1/R2 STD cable, HW R1.x.x/R2.x.x

HDMI extension

9-32 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-8: Accessories and Cable Kits

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

605 5693411-S R2 Touch Panel HW R2.x.x

module cable SVC

5693411 R2 Touch Panel HW R2.x.x

LVDS_HDMI Cable

5487242 R2 Touch Panel HW R2.x.x

Power Cable

5487243 R2 Touch Panel HW R2.x.x

USB Cable

606 5479057-S Vivid T8/Vivid T8 Pro HW R1.x.x/R2.x.x

R2 Printer cable kit

5460145 R1/R2 STD cable, HW R1.x.x/R2.x.x

USB2.0, SUSB to
printer

5459381 R1/R2 DC cable, HW R1.x.x/R2.x.x

SUSB to printer

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-33

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-8: Accessories and Cable Kits

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

607 5479055-S One box to KBD HW Note: The latest BOM does not R1.x.x/R2.x.x RP
cable kit for LOGIQ include 5448555 as part EOL.
F series Please contact Eng if needed.

STD CABLE, HW R1.x.x/R2.x.x

5476281 USB2.0, SMIO TO
SUSB, A-A

5458647 Touch Panel Cable HW R1.x.x/R2.x.x

5452187 STD CABLE, HW R1.x.x/R2.x.x

USB2.0, SMIO TO
SKBD

5448555 MISC CABLE, SMIO HW R1.x.x/R2.x.x

TO SKBD AND
SUSB AND LCD

5443676 STD CABLE, HW R1.x.x/R2.x.x

USB2.0, SKBD TO
TOUCHPANEL

608 5494288-S Vivid T8/Vivid T8 Pro ME R1.x.x/R2.x.x

R1/R2 Logo kit

609 5484791 Vivid T8/Vivid T8 Pro ME R1.x.x/R2.x.x

R1/R2 Printer shelf
option kit

610 5718363 R1/R2 VGA to HW R1.x.x/R2.x.x

S-video adapter

611 5495621-3 Vivid T8 R1.0.2 SW SW R1.x.x

-S USB Key for Service

9-34 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-8: Accessories and Cable Kits

Part Part Compatible Repl

Item Number Description Type Corresponding graphics With Proc

612 5495621-5 Vivid T8 R1.0.4 SW SW R1.x.x

-S USB key for service

613 5495621-6 Vivid T8 R1.0.5 SW SW R1.x.x

-S USB Key Service
Part

614 5495621-7 Vivid T8 R1.0.6 SW SW R1.x.x

-S USB key for service

615 5495621-8 Vivid T8 R1.0.7 SW SW R1.x.x

-S USB key for service

616 5726719-3 Vivid T8 R2.0.2 SW R2.x.x

System and
Application Software
USB

617 5726719-4 Vivid T8 R2.0.3 SW R2.x.x

System and
Application Software
USB

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-35

5718825-100 English Rev. 15 System view
Renewal Parts

9-3-12 Probe
Table 9-9: Probes for Vivid T8/Vivid T8 Pro

Center Image
Part Frequency
Item Part Name Number Illustration (MHz) Qty FRU

700 4C-RS 5488477 1.8 - 6.0 1 1

701 L6-12-RS 5454332 6 - 13 1 1

702 E8C-RS 5499516 4.0 - 11.0 1 1

703 3Sc-RS 5433833 1.3 - 4.0 1 1

704 8C-RS 5499508 4.0 - 11.0 1 1

705 6S-RS 5499316 2.7-8.0 1 1

706 P2D-RS 5729436 2.0 1 1

(RS type
connector)

9-36 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-9: Probes for Vivid T8/Vivid T8 Pro

Center Image
Part Frequency
Item Part Name Number Illustration (MHz) Qty FRU

707 6Tc-RS 5729431 2.9 - 8.0 1 1

708 12S-RS 5499321 4.5 -12 1 1

(for R2.x.x
only)

709 9L-RS 5499511 4-9 1 1

(for R2.x.x
only)

710 12L-RS 5499501 4 - 13 1 1

(for R2.x.x
only)

711 9T-RS (for 5729433 3.6 - 10.0 1 1

R2.1.x)

NOTE: 6Tc-RS is not available in China.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-37

5718825-100 English Rev. 15 System view
Renewal Parts

9-3-13 Peripheral
Table 9-10: ECG cable for Vivid T8/Vivid T8 Pro

Item Solution Part Number Description Qty

800 AHA Solution 2269979 Cable: Main ECG Americas & Japan 1

801 2269982 Cable: White Lead Europe & Americas 1

802 2269982-2 Cable: Green Lead Americas 1

803 2269982-3 Cable: Black Lead Americas 1

804 IEC Solution 2269980 Cable: Main ECG Europe & ROW 1

805 2269983 Cable: Yellow Lead Europe & Americas 1

806 2269983-2 Cable: Black Lead Europe &ROW 1

807 2269983-3 Cable: Red Lead Europe &ROW 1

808 PED ECG 2106403-001 DIN CONVERTER, 5-LEAD 1

ADAPTER
809 EU Solution 2106305-003-S ECG TRUNK CABLE, 3/5-LEAD, IEC, 3.6 M/12 FT. - 1
service edition

810 2009101-406 Lead electr neo IEC 600 CFN 1

811 PED ECG 2106403-001 DIN CONVERTER, 5-LEAD 1

ADAPTER
812 US Solution 2106305-001-S ECG TRUNK CABLE, 3/5-LEAD, AHA, 3.6 M/12 FT. - 1
service edition

813 2009101-404 Lead electr neo AHA 600 CFN 1

814 ECG Cable 2106305-003-S ECG TRUNK CABLE, 3/5-LEAD, IEC, 3.6 M/12 FT. - 1
Kit - EU service edition

815 2106388-106 REPLACEMENT ECG LEADWIRE GRABBER YEL L 1

, IEC, 130 CM/ 51 IN

816 2106388-107 REPLACEMENT ECG LEADWIRE GRABBER BLK 1

N, IEC, 130 CM/ 51 IN

817 2106388-108 REPLACEMENT ECG LEADWIRE GRABBER RED 1

R, IEC, 130 CM/ 51 IN

818 ECG Cable 2106305-001-S ECG TRUNK CABLE, 3/5-LEAD, AHA, 3.6 M/12 FT. - 1
Kit - US service edition

819 2106388-102 REPLACEMENT ECG LEADWIRE GRABBER RA, 1

AHA, 130 CM/ 51 IN

820 2106388-103 REPLACEMENT ECG LEADWIRE GRABBER GRN 1

RL, AHA, 130 CM/ 51 IN

821 2106388-104 REPLACEMENT ECG LEADWIRE GRABBER BLK 1

LA, AHA, 130 CM/ 51 IN

9-38 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

Table 9-11: Other peripherals for Vivid T8/Vivid T8 Pro

Item Part Number Description Qty

Footswitch

822 5338419 Footswitch MKF 2-MED USB GP26 1

823 5718360 Suns USB footswitch (for R2.x.x only) 1

USB Stick

824 5168040-4 Sandisk USB Stick 4G 1

825 5831001 USB stick for Storage 1

826 5434317-3 1TB USB mobile HDD 1

Printer

827 5389822 (H48532AM) SONY UPD25 Color Printer (for R1 only) 1

828 5133106-2 (H48542LY) SONY UPD25 Color Printer CHN kit (for R1 only) 1

829 5133107-2 (H48542LZ) SONY UPD25 Color Printer USA kit (for R1 only) 1

830 5133108-2 (H48552LA) SONY UPD25 Color Printer EUP kit (for R1 only) 1

831 5133109-2 (H48552LB) SONY UPD25 Color Printer JPN kit (for R1 only) 1

832 NA (H48532AL) SONY UP-D898MD Printer (for R2 only) 1

833 5449734 (H48522LZ) Sony UPD711 Printer 1

834 NA (H41652LA) Sony UP-D897MD Printer CHN Kit 1

835 NA (H41648482LY) Sony UP-D897MD Printer USA Kit 1

836 NA (H41642LZ) Sony UP-D897MD Printer EUP Kit 1

837 NA (H41652LB) Sony UP-D897MD Printer JPN Kit 1

Biopsy Kit

838 5160703 4C-RS Biopsy Kit 1

839 2398164 E8CS reusable Biopsy Kit 1

840 E8385MJ E8CS Starter Kit 1

841 5176499 L6-12-RS Biopsy Kit 1

842 5329137 3Sc-RS Biopsy Kit 1

843 5178413 9L-RS Multi-angle Biopsy Kit 1

844 5176499 12L-RS Multi-angle Biopsy Kit 1

845 5368619 12L-RS Transverse Biopsy Kit 1

846 5370742 12L-RS Infinite Biopsy Kit 1

Wireless network adapter

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-39

5718825-100 English Rev. 15 System view
 Renewal Parts

Table 9-11: Other peripherals for Vivid T8/Vivid T8 Pro

Item Part Number Description Qty

847 5728576 NetGear Wireless USB Adapter A6210 Kit 1

NOTE: Please refer service note DOC2447505 Printer Compatibility

Matrix for Vivid T and Vivid IQ, which recorded Non-GE
purchase printer overall matrix.

9-40 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

9-3-14 Manuals
Table 9-12: Manuals for Vivid T8/Vivid T8 Pro

Replaced
Item Part Number Description by Qty FRU

1000 5497430-200 Vivid T8/Vivid T8 Pro Manual CD 5723413-200 1 N

1001 5487771-100 Vivid T8/Vivid T8 Pro Advanced Reference 5718516-100 1 N

Manual

1002 5490863-100 Vivid T8/Vivid T8 Pro Basic Service Manual 5718826-100 1 N

1003 5503263-100 Vivid T8/Vivid T8 Pro User Guide English 5718824-100 1 N

version

1004 5487003-100 Vivid T8/Vivid T8 Pro User Manual English 5692931-100 1 N

version

1005 5487003-101 Vivid T8/Vivid T8 Pro User Manual French 5692931-101 1 N

version

1006 5487003-106 Vivid T8/Vivid T8 Pro User Manual Spanish 5692931-106 1 N

version

1007 5487003-108 Vivid T8/Vivid T8 Pro User Manual German 5692931-108 1 N

version

1008 5487003-111 Vivid T8/Vivid T8 Pro User Manual Italian 5692931-111 1 N

version

1009 5487003-121 Vivid T8/Vivid T8 Pro User Manual Dutch 5692931-121 1 N

version

1010 5487003-127 Vivid T8/Vivid T8 Pro User Manual Brazilian 5692931-127 1 N

Portuguese version

1011 5487003-129 Vivid T8/Vivid T8 Pro User Manual Estonian 5692931-129 1 N

version

1012 5487003-131 Vivid T8/Vivid T8 Pro User Manual Slovenian 5692931-131 1 N

version

1013 5487003-140 Vivid T8/Vivid T8 Pro User Manual Japanese 5692931-140 1 N

version

1014 5487003-141 Vivid T8/Vivid T8 Pro User Manual Simplified 5692931-141 1 N

Chinese version

1015 5487003-142 Vivid T8/Vivid T8 Pro User Manual Swedish 5692931-142 1 N

version

1016 5487003-144 Vivid T8/Vivid T8 Pro User Manual Korean 5692931-144 1 N

version

1017 5487003-145 Vivid T8/Vivid T8 Pro User Manual Russian 5692931-145 1 N

version

1018 5487003-150 Vivid T8/Vivid T8 Pro User Manual Polish 5692931-150 1 N

version

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-41

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-12: Manuals for Vivid T8/Vivid T8 Pro

Replaced
Item Part Number Description by Qty FRU

1019 5487003-151 Vivid T8/Vivid T8 Pro User Manual Greek 5692931-151 1 N

version

1020 5487003-153 Vivid T8/Vivid T8 Pro User Manual 5692931-153 1 N

Hungarian version

1021 5487003-154 Vivid T8/Vivid T8 Pro User Manual Slovakian 5692931-154 1 N

version

1022 5487003-155 Vivid T8/Vivid T8 Pro User Manual Czech 5692931-155 1 N

version

1023 5487003-159 Vivid T8/Vivid T8 Pro User Manual Turkish 5692931-159 1 N

version

1024 5487003-160 Vivid T8/Vivid T8 Pro User Manual Danish 5692931-160 1 N

version

1025 5487003-161 Vivid T8/Vivid T8 Pro User Manual 5692931-161 1 N

Norwegian version

1026 5487003-162 Vivid T8/Vivid T8 Pro User Manual Finnish 5692931-162 1 N

version

1027 5487003-165 Vivid T8/Vivid T8 Pro User Manual Bulgarian 5692931-165 1 N

version

1028 5487003-167 Vivid T8/Vivid T8 Pro User Manual Romanian 5692931-167 1 N

version

1029 5487003-168 Vivid T8/Vivid T8 Pro User Manual Croatian 5692931-168 1 N

version

1030 5487003-174 Vivid T8/Vivid T8 Pro User Manual 5692931-174 1 N

Lithuanian version

1031 5487003-175 Vivid T8/Vivid T8 Pro User Manual Latvian 5692931-175 1 N

version

1032 5487003-176 Vivid T8/Vivid T8 Pro User Manual Serbian 5692931-176 1 N

version

1033 5487003-177 Vivid T8/Vivid T8 Pro User Manual European 5692931-177 1 N

Portuguese version

1034 5487003-181 Vivid T8/Vivid T8 Pro User Manual 5692931-181 1 N

Indonesian version

9-42 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Renewal Parts Lists

9-3-14 Manuals(continued)
Table 9-13: Manuals for Vivid T8/Vivid T8 Pro

Item Part Number Description Qty FRU

1000 5723413-200 Vivid T8/Vivid T8 Pro Manual CD 1 N

1001 5718516-100 Vivid T8/Vivid T8 Pro Advanced Reference Manual 1 N

1002 5718826-100 Vivid T8/Vivid T8 Pro Basic Service Manual 1 N

1003 5718824-100 Vivid T8/Vivid T8 Pro User Guide English version 1 N

1004 5692931-100 Vivid T8/Vivid T8 Pro User Manual English version 1 N

1005 5692931-101 Vivid T8/Vivid T8 Pro User Manual French version 1 N

1006 5692931-106 Vivid T8/Vivid T8 Pro User Manual Spanish version 1 N

1007 5692931-108 Vivid T8/Vivid T8 Pro User Manual German version 1 N

1008 5692931-111 Vivid T8/Vivid T8 Pro User Manual Italian version 1 N

1009 5692931-121 Vivid T8/Vivid T8 Pro User Manual Dutch version 1 N

1010 5692931-127 Vivid T8/Vivid T8 Pro User Manual Brazilian Portuguese 1 N

version

1011 5692931-129 Vivid T8/Vivid T8 Pro User Manual Estonian version 1 N

1012 5692931-131 Vivid T8/Vivid T8 Pro User Manual Slovenian version 1 N

1013 5692931-140 Vivid T8/Vivid T8 Pro User Manual Japanese version 1 N

1014 5692931-141 Vivid T8/Vivid T8 Pro User Manual Simplified Chinese 1 N

version

1015 5692931-142 Vivid T8/Vivid T8 Pro User Manual Swedish version 1 N

1016 5692931-144 Vivid T8/Vivid T8 Pro User Manual Korean version 1 N

1017 5692931-145 Vivid T8/Vivid T8 Pro User Manual Russian version 1 N

1018 5692931-150 Vivid T8/Vivid T8 Pro User Manual Polish version 1 N

1019 5692931-151 Vivid T8/Vivid T8 Pro User Manual Greek version 1 N

1020 5692931-153 Vivid T8/Vivid T8 Pro User Manual Hungarian version 1 N

1021 5692931-154 Vivid T8/Vivid T8 Pro User Manual Slovakian version 1 N

1022 5692931-155 Vivid T8/Vivid T8 Pro User Manual Czech version 1 N

1023 5692931-159 Vivid T8/Vivid T8 Pro User Manual Turkish version 1 N

1024 5692931-160 Vivid T8/Vivid T8 Pro User Manual Danish version 1 N

1025 5692931-161 Vivid T8/Vivid T8 Pro User Manual Norwegian version 1 N

1026 5692931-162 Vivid T8/Vivid T8 Pro User Manual Finnish version 1 N

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 9-43

5718825-100 English Rev. 15 System view
Renewal Parts

Table 9-13: Manuals for Vivid T8/Vivid T8 Pro

Item Part Number Description Qty FRU

1027 5692931-165 Vivid T8/Vivid T8 Pro User Manual Bulgarian version 1 N

1028 5692931-167 Vivid T8/Vivid T8 Pro User Manual Romanian version 1 N

1029 5692931-168 Vivid T8/Vivid T8 Pro User Manual Croatian version 1 N

1030 5692931-174 Vivid T8/Vivid T8 Pro User Manual Lithuanian version 1 N

1031 5692931-175 Vivid T8/Vivid T8 Pro User Manual Latvian version 1 N

1032 5692931-176 Vivid T8/Vivid T8 Pro User Manual Serbian version 1 N

1033 5692931-177 Vivid T8/Vivid T8 Pro User Manual European 1 N

Portuguese version

1034 5692931-181 Vivid T8/Vivid T8 Pro User Manual Indonesian version 1 N

1035 5692931-184 Vivid T8/Vivid T8 Pro User Manual Kazakh version 1 N

9-44 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Chapter 10

Care and Maintenance

This chapter describes Care and Maintenance on the

Ultrasound system and peripherals. These procedures
are intended to maintain the quality of the Ultrasound
system’s performance. Read this chapter completely
and familiarize yourself with the procedures before
performing a task.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-1

5718825-100 English Rev. 15 System view
Care and Maintenance

10-1 Overview

10-1-1 Contents in this chapter

• 10-1 ‘Overview’ on page 10-2
• 10-2 ‘Warnings’ on page 10-3
• 10-3 ‘Why do maintenance’ on page 10-4
• 10-4 ‘Maintenance task schedule’ on page 10-6
• 10-5 ‘Tools required’ on page 10-8
• 10-6 ‘System maintenance’ on page 10-12
• 10-7 ‘Electrical safety tests’ on page 10-28
• 10-8 ‘When there's too much leakage current …’ on
page 10-39
• 10-9 ‘Inspection Paperwork’ on page 10-41
• 10-10 ‘Electrical Safety Tests Log’ on page 10-43

10-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Warnings

10-2 Warnings

DANGER BE SURE TO DISCONNECT THE ULTRASOUND SYSTEM

POWER PLUG AND OPEN THE MAIN CIRCUIT BREAKER
BEFORE YOU REMOVE ANY PARTS. BE CAUTIOUS
WHENEVER POWER IS STILL ON AND COVERS ARE
REMOVED.

CAUTION Practice good ESD prevention. Wear an anti–static strap when

handling electronic parts and even when disconnecting/
connecting cables.

CAUTION Do not pull out or insert circuit boards while power is on.

CAUTION Do not operate this Ultrasound system unless all board covers
and frame panels are securely in place. System performance
and cooling require this.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-3

5718825-100 English Rev. 15 System view
Care and Maintenance

10-3 Why do maintenance

10-3-1 Periodic maintenance inspections

It has been determined by engineering that your Vivid T8/Vivid
T8 Pro does not have any high wear components that fail with
use, therefore no Periodic Maintenance inspections are
mandatory.
However, some customers’ Quality Assurance Programs may
require additional tasks and or inspections at a different
frequency than listed in this manual.

10-3-2 Keeping records

It is good business practice that ultrasound facilities maintain
records of periodic and corrective maintenance. The Ultrasound
Periodic Maintenance Inspection Certificate provides the
customer with documentation that the Ultrasound system is
maintained on a periodic basis.
A copy of the Ultrasound Periodic Maintenance Inspection
Certificate should be kept in the same room or near the
Ultrasound system.

10-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Why do maintenance

10-3-3 Quality assurance

In order to gain accreditation from organizations such as the
American College of Radiology (USA), it is the customer’s
responsibility to have a quality assurance program in place for
each Ultrasound system. The program must be directed by a
medical physicists, the supervising radiologist/physician or
appropriate designee.
Routine quality control testing must occur regularly. The same
tests are performed during each period so that changes can be
monitored over time and effective corrective action can be
taken.
Testing results, corrective action and the effects of corrective
action must be documented and maintained on the site.
Your GE service representative can help you with establishing,
performing and maintaining records for a quality assurance
program. Contact GE for coverage and/or price for service.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-5

5718825-100 English Rev. 15 System view
Care and Maintenance

10-4 Maintenance task schedule

10-4-1 How often should maintenance tasks be performed?

The Care and Maintenance task schedule (provided in
Table 10-1 on page 10-6) specifies how often your Vivid T8/Vivid
T8 Pro should be serviced and outlines items requiring special
attention.
NOTE: It is the customer’s responsibility to ensure the Vivid T8/Vivid T8
Pro care and maintenance is performed as scheduled in order to
retain its high level of safety, dependability and performance.
Your GE Service Representative has an in-depth knowledge of
your Vivid T8/Vivid T8 Pro and can best provide competent,
efficient service. Contact GE for coverage information and/or
price for service.
The service procedures and recommended intervals shown in
the Care and Maintenance Task Schedule assumes that you
use your Vivid T8/Vivid T8 Pro for an average patient load
(10-12 per day) and not use it as a primary mobile Ultrasound
system which is transported between diagnostic facilities.
NOTE: If conditions exist which exceed typical usage and patient load,
then it is recommended to increase the periodic maintenance
frequencies.

Table 10-1: Customer Care Schedule

Per
Facilities
Service at Indicated QA
Time Daily Weekly Monthly Program Notes

Clean Probes •* * or before each use

Inspect AC Mains Cable • Mobile Ultrasound

system: Check
Weekly

Inspect Cables and •

Connectors

Clean Console •

Clean LCD •

10-6 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Maintenance task schedule

Table 10-1: Customer Care Schedule (Continued)

Per
Facilities
Service at Indicated QA
Time Daily Weekly Monthly Program Notes

Console Leakage Current See Notes Twice Annually

Checks

Peripheral Leakage See Notes Twice Annually

Current Checks

Surface Probe Leakage See Notes Twice Annually

Current Checks

Endocavity Probe Leakage See Notes Quarterly Annually

Current Checks

Surgical Probe Leakage See Notes Quarterly Annually

Current Checks

Measurement See Notes Twice Annually

Accuracy Checks
Functional Checks See Notes also after corrective
maintenance

NOTE: The maintenance may require specialized equipment to

complete.
NOTE: The periodic maintenances are not mandatory. The table above
is for reference only.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-7

5718825-100 English Rev. 15 System view
Care and Maintenance

10-5 Tools required

NOTE: For a list of required tools for servicing the Vivid T8/Vivid T8 Pro,
refer to chapter 8.

10-5-1 Standard GE tool kit

The following is a description of the “Standard” GE tool kit in the
USA. Not all tools are required.

Table 10-2: Overview of GE-1 tool kit contents

Tool ID Description Tool ID Description

9-45358 Pliers Retaining Ring 9-XL9971MM Xcelite-hex Blade 1.27mm

9-4078 Scribe 9-XL9972MM Xcelite-hex Blade 1.5mm

9-44572 Wrench Open End 3/8 - 7/16 9-XL9973MM Xcelite-hex Blade 2 mm

9-44579 Wrench Open End 1/2 - 9/16 9-XL9974MM Xcelite-hex Blade 2.5mm

9-44579 Wrench Open End 1/2 - 9/16 9-XL9975MM Xcelite-hex Blade 3mm

9-45385 Pliers, Arc Joint 7 inch 9-XL9976MM Xcelite-hex Blade 4mm

9-45378 Pliers, Slip Joint 9-XL9977MM Xcelite-hex Blade 5mm

9-4518 Pliers, Long Nose, Miniature 9-XL991CM Handle

9-4518 Pliers, Long Nose, Miniature C2356E Screw starter - Kedman

Quick Wedge

9-44776 Ignition Wrench Set, 10 pc. BLBO Box - 18 Compartment

9-44601 Wrench, Adj., 4 inch DWL4283T Box - 5 Compartment

9-4151 Screwdriver, Blade, Stubby 9-41322 Pickup Tool, Claw type

9-41421 Screwdriver, Blade, Pocket 9-6757 6 pc Needle File Set

clip

9-41594 Screwdriver, Blade 1/8 in. × 4 9-9487 Utility Knife

in.

9-41581 Screwdriver, Blade 3/16 in. × 4 9-45341 Pliers Vice Grip 10 inch
in.

9-39451 20' Steel Tape, locking Spring 9-3001 Xacto Pen Knife
load

10-8 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Tools required

Table 10-2: Overview of GE-1 tool kit contents (Continued)

Tool ID Description Tool ID Description

9-GH807 Ratchet, Offset, Slotted 9-HT62002 Solder Aid, Fork and Hook

68-412 Ratchet, Offset, Phillips 9-4099 Mirror, Round, Telescoping

9-GH130 Tapered Reamer 9-GH3001 Steel Rule Decimal 6 inch

9-41584 Screwdriver, slotted 1/4 in. × 6 9-GH300ME Steel Rule Metric 6 inch
in.

9-4118 Screwdriver, Phillips #2, 9-XL9920 Xcelite-hex Blade.050 inch

Stubby

9-41293 Screwdriver, Phillips #0 9-XL9921 Xcelite-hex Blade 1/16 inch

9-41294 Screwdriver, Phillips #1 9-XL9922 Xcelite-hex Blade 5/16 inch

9-41295 Screwdriver, Phillips #2 9-XL9923 Xcelite-hex Blade 3/32 inch

9-46677 Hex Keys, 20 pc., Metric 9-XL9924 Xcelite-hex Blade 1/8 inch

9-34701 1/4 in. Standard Socket set (19 9-XL9925 Xcelite-hex Blade 5/32 inch
pc)

9-43499 1/2 inch Socket 1/4 inch drive 9-XL9926 Xcelite-hex Blade 3/16 inch

9-4355 Flex Spinner 9-XL99764 Xcelite-hex Blade 7/64

9-43523 Breaker 9-XL99964 Xcelite-hex Blade 9/64

9-43531 6 inch Ext. 9-XLM60 Mini-screwdriver kit

9-65283 Case 8.5 in. × 4.5 in. × 2 in. 9-45072 Pliers 6 inch Diagonal
Deep

9-46696 Hex Keys 9-XL100X Wire Stripper/Cutter 5 inch -

100X

9-39829 Torpedo Level, Magnetic 9-XL87CG Pliers - very fine needle

nose-87CG

9-38461 Hammer, Ball Peen, 4 oz. 9-WEWDT-07 Weller-Soldering-Replacem

ent Tip(1)

9-4280 Universal Joint 1/4 inch 9-WS175-E Wiss - Surgical Scissors

9-WEW60P3 Weller - Soldering Iron, 3 wire KH174 Hemostat 5 inch Straight

9-WECT5B6 Weller - Soldering Iron Tip KH175 Hemostat 5 inch curved

9-WEWDP12 Weller - Desoldering Pump 9-Z9480121 Alignment tool (red)

93383 Flashlight Mini-Mag Lite (AAA

Bat.)

9-GH408 Tweezers

21576 Brush - Bristle

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-9

5718825-100 English Rev. 15 System view
Care and Maintenance

Table 10-2: Overview of GE-1 tool kit contents (Continued)

Tool ID Description Tool ID Description

9-4516 Pliers 4 1/4 inch Diagonal

10-5-2 GE-2 tool kit

Table 10-3: Overview of GE-2 tool kit contents

GE-2 Sears Kit (#99034)

Tool ID Description Tool ID Description

9-45381 Pliers, Arc Joint 9 1/2 inch 9-44067 Socket 1 1/16 in. for 1/2 in.
drive

9-45092 Pliers, Linesman 8 1/2 inch 9-42679 Socket 10MM Hex for 1/2 in.
drive (2273333)

9-42882 Punch, Pin 3/32 inch 9-44262 Extension 10 inch for 1/2 in.
drive (2273405)

9-42884 Punch, Pin 5/32 inch 9-4258 3/8 inch to 1/2 inch Adapter

9-42886 Punch, Pin 1/4 inch 9-34374 3/8 inch Metric Socket Set -
12 PT

9-42973 Cold Chisel 1/2 inch 9-44311 16mm Socket 12 pt.

9-GH77 Center Punch Automatic 9-33485 Metal Socket Tray

9-GH890 File Handle, Adj. 9-33484 Metal Socket Tray

9-31276 File, Round, Bastard 8 inch 9-33484 Metal Socket Tray

9-31277 File, Half Round, Bastard 8 9-52068 Tap and Drill Set
inch

9-31263 File, Flat Mill 8 inch 9-52722 #6 Tap

21045C Close Quarter Saw 9-52723 #8 Tap

9-44604 Wrench, Adj. 10 inch High Speed Drill Set

9-41587 Screwdriver 5/16 inch × 8 inch #36 Drill

9-41586 Screwdriver, Stubby 5/16 inch #29 Drill

9-GH19512 Countersink 1/2 inch 9-44046 3/8 inch Socket Set

9-44741 12 PC Combination Wrench

Set

10-10 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Tools required

10-5-3 Special tools, supplies and equipment used for maintenance

Table 10-4: Overview of tool requirements for periodic maintenance

Tool / kit Comments

Digital Volt Meter (DVM)

Anti Static Kit Kit includes anti–static mat, wrist strap and cables
for 200 to 240V system
3M #2204 Large adjustable wrist strap
3M #2214 Small adjustable wrist strap
3M #3051 conductive ground cord

Anti Static Vacuum Cleaner 120V

230V

Safety Analyzer The safety Analyzer tool should be calibrated and

compliant with AAMI/ESI 1993 or IEC 60601 or
AS/NZS 3551.

QIQ Phantom RMI Grayscale Target Model 403GS

NOTE! The use of a Phantom is not required
during Preventive Maintenance. Customer may
use it as part of their Quality Assurance
Program tests.

B/W Printer Cleaning Sheet See printer user manual for requirements

Color Printer Cleaning Sheet See printer user manual for requirements

Disposable Gloves

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-11

5718825-100 English Rev. 15 System view
Care and Maintenance

10-6 System maintenance

10-6-1 Preliminary checks

The preliminary checks take about 15 minutes to perform. Refer
to the Ultrasound system user documentation whenever
necessary.

Table 10-5: System preliminary checks

Step Item Description

1. Ask and Listen Ask the customer if they have any problems or questions about the
equipment.

2. Paperwork Fill in the top of Ultrasound Inspection Certificate (see Figure 10-8 on
page 10-41). Record all probes and Ultrasound system options.

3. Power up • Turn the Ultrasound system power on and verify that all fans and
peripherals turn on.
• Watch the displays during power up to verify that no warning or error
messages are displayed.
• Where applicable, confirm that the battery is charged. If no AC Input
present, use the internal battery.

4. Probes Verify that the Ultrasound system properly recognizes all probes.

5. Displays Verify proper display on the monitor.

6. InSite Where applicable, for Warranty and Contract Customers only:

• Verify that InSite is functioning properly.
• Ensure two-way remote communications.

7. Review Error Logs Where applicable, Error Logs can be reviewed via system diagnostics.

8. Diagnostics Optional.

9. Presets Backup all Customer Presets to an appropriate media.

10. Image Archive Back up the Image Archive onto appropriate media.

10-12 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System maintenance

10-6-2 Functional checks

NOTE: See also Chapter 4
The functional checks take about 60 minutes to perform. Refer
to the Ultrasound system user documentation whenever
necessary.

10-6-2-1 System checks

Table 10-6: System functional checks

Step Item Description

1. B-Mode Verify basic B-Mode (2D) operation. Check the basic Ultrasound system
controls that affect this mode of operation.

2. CF-Mode Verify basic CF-Mode (Color Flow Mode) operation. Check the basic
Ultrasound system controls that affect this mode of operation.

3. Doppler Modes Verify basic Doppler operation (PW and CW if available). Check the basic
Ultrasound system controls that affect this mode of operation.

4. M-Mode Verify basic M-Mode operation. Check the basic Ultrasound system
controls that affect this mode of operation.

5. Probe Elements Perform an Element Test on each probe to verify that all the probe
elements and system channels are functional.

6. Applicable Verify the basic operation of all optional modes such as Contrast. Check
Software Options the basic Ultrasound system controls that affect each options operation.

7. Xmit/Recv Use the Visual Channel Utility on the loop connect to verify that all system
Elements xmit/recv channels are functional.

8. Operator Panel Perform the Operator Panel Test Procedure.

test

9. Keyboard Do the interactive keyboard test.

10. LCD Verify basic LCD display functions. Refer to Chapter 3 of the User Manual.

11. Software Menu Verify Software Menu display functions. Refer to Chapter 3 of the User
check Manual.

12. Peripherals See: 4-3-33 ‘Peripheral checks’ on page 4-41.

13. Measurements In measurement mode, make distance measurement, get result in result
window. Verify the distance by graduate rule. Distance Accuracy should
be within ±5%. (Name result from result window Result A, result from
graduate rule Result B; Distance Accuracy = (Result B-Result A)/Result A)

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-13

5718825-100 English Rev. 15 System view
Care and Maintenance

10-6-2-2 Peripheral/option checks

If any peripherals or options are not part of the system

configuration, the check can be omitted.
Refer to the User Manual for a list of approved peripherals/
options.

Table 10-7: GE approved peripheral/hardware option functional checks

Step Item Description

1. Media Verify media drive(s) read/write properlty. Clean if necessary.

2. B/W Printer Verify hardcopy output of the B/W video page printer. Clean heads and
covers if necessary.

3. Color Printer Verify hardcopy output of the Color video page printer. Clean heads and
covers if necessary.

4. DICOM Verify that DICOM is functioning properly. Send an image to a DICOM

device.

5. ECG Verify basic operation with customer

6. Footswitch Verify that the footswitch is functioning as programed. Clean as necessary.

7. DVD Verify that the DVD is functioning properly. Clean heads and covers if
necessary.

10-6-2-3 Mains cable inspection

Table 10-8: Mains Cable Inspection, As Appropriate

Step Item Description

1. Unplug Cord Disconnect the mains cable from the wall and Ultrasound system.

2. Inspect Inspect it and its connectors for damage of any kinds.

3. Verify Verify that the LINE, NEUTRAL and GROUND wires are properly attached
to the terminals, and that no strands may cause a short circuit.

10-14 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System maintenance

10-6-2-4 Cleaning

Table 10-9: General Cleaning

Step Item Description

1. Console Remove the battery. Use a fluid detergent in warm water on a soft, damp
cloth to carefully wipe the entire system. Be careful not to get the cloth too
wet so that moisture does not enter the console.

2. Probe Holder Clean probe holders. (they may need to be soaked to remove excess gel).

3. LCD Use a soft, non-abrasive folder cloth. Gently wipe the LCD face. DO NOT
use a glass cleaner that has a hydrocarbon base (such as Benzene,
Methy Alcohol or Methy Ethyl Ketone) on LCD with the filter (anti-glare
shield).

10-6-3 Physical inspection

NOTE: These features may not be present on all Ultrasound systems.

Table 10-10: Physical checks

Step Item Description

1. Labeling Verify that all Ultrasound system labeling is present and in readable
condition.

2. Scratches & Dents Inspect the exterior for dents, scratches or cracks. .

3. Input Power Refer to: 10-6-2-3 ‘Mains cable inspection’ on page 10-14.

4. Cables & Check all internal cable harnesses and connectors for wear and secure
Connectors connector seating. Pay special attention to footswitch assembly and probe
strain or bend reliefs.

5. Shielding & Check to ensure that all EMI shielding, internal covers, air flow panels and
Covers screws are in place. Missing covers and hardware could cause EMI/RFI
problems while scanning.

6. Control Panel Inspect keyboard and control panel. Note any damaged or missing items.

7. Control Panel Check for proper operation of all operator panel and Freeze Key light.
Lighting

8. LCD Inspect the LCD Display for scratches and bad pixels.
Verify proper operation of Contrast and Brightness controls.
Where applicable, confirm that the LCD arm allows:
• swivelling the screen to the left and to the right
• folding the screen to the locked position
• release and adjustment backwards and forwards
• can be adjusted in the up/down positions.
Note: LCD Arm movement may vary and is not applicable to all Ultrasound
systems.

9. External I/O Check all connectors for damage.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-15

5718825-100 English Rev. 15 System view
Care and Maintenance

Table 10-10: Physical checks (Continued)

Step Item Description

10. Power and Check for proper operation of all Power and System Status Indicators.
System Status
Indicators

11. Battery Where applicable, check that the battery is not damaged, does not leak,
does not emit an odor, and is not deformed or discolored. Observe all
warnings and cautions for battery handling, recharging, storing, and/or
disposal,

10-6-4 Inspecting the system

CAUTION If any defects are observed or malfunctions occur, DO NOT

operate the equipment, and inform a qualified service person.

Examine the following on a monthly basis (or whenever there is

a reason to assume that any issue may have occurred):
• Connectors on cables, for any mechanical defects
• Entire length of electrical and power cables, for cuts or
abrasions
• Equipment, for loose or missing hardware
• Control panel and keyboard for defects
• Wheels for proper locking operation

WARNING To avoid electrical shock hazard, do not remove panels or

covers from the unit.

10-16 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System maintenance

10-6-5 Cleaning the unit

The ultrasound unit requires regular care and maintenance to
function safely and properly. The following components should
be cleaned.
Weekly:
• Monitor and Touch screen
• Control panel
• Keyboard
• Probe holders
• System cabinet
• Footswitch
Biweekly:
• Air filters

CAUTION When performing cleaning procedures, to prevent the risk of

system damage, always observe the following precautions:
• Use only cleaning materials and solutions as
recommended in the procedures described below.
• Never use thinner, benzene, ethanol or methanol alcohol,
abrasive cleaners, or other strong solvents, as these may
cause damage to the cabinet or LCD panel. Only use
isopropyl alcohol, when instructed to do so.
• Do not spray any liquid directly onto the Vivid T8/Vivid T8
Pro covers, LCD Display or keyboard.
• Do not allow any liquid to drip or seep into the system.
• DO NOT scratch or press on the panel with any sharp
objects, such as pencils or pens, as this may result in
damage to the panel.
• Make sure not to spill or spray any liquid on the controls,
into the system cabinet, or in the probe connection
receptacle.
• Prior to cleaning, turn OFF power to the system and
disconnect the mains cable.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-17

5718825-100 English Rev. 15 System view
Care and Maintenance

10-6-5 Cleaning the unit(continued)

10-6-5-1 Monitor and Touch panel

NOTE: Never use thinner, benzene, ethanol or methanol alcohol,

abrasive cleaners, or other strong solvents, as these may cause
damage to the cabinet or LCD panel.
NOTE: DO NOT scratch or press on the panel with any sharp objects,
such as pencils or pens, as this may result in damage to the
panel.
To clean the cabinet:
1. To remove stains, wipe the cabinet with a soft, lightly
moistened cloth using a mild detergent. Do not spray wax or
cleaner directly into the cabinet.
2. In the event that disinfection is required or any stubborn
stains remain, absorb a small quantity of isopropyl rubbing
alcohol on a soft, dust-free cloth. Wipe the cabinet and allow
to dry.
To clean LCD panel and Touch panel:
1. Clean the LCD surface with a soft cloth, such as cotton or
lens paper.
If necessary, stubborn stains can be removed by moistening
part of a cloth with water or a 50-50 mixture of isopropyl
alcohol and water that does not contain impurities. Wring
out as much of the liquid as possible then wipe the LCD
surface. Do not let any liquid drip into the system.

10-18 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System maintenance

10-6-5 Cleaning the unit(continued)

10-6-5-2 Control panel and keyboard

NOTE: Diligent cleaning of the console reduces the risk of spreading

infection from person to person, and also helps to maintain a
clean working environment.
Only use the following cleaners on the Control panel:
• A non-abrasive soap and water solution (e.g. Palmolive
Dishwashing Liquid, manufactured by Colgate-Palmolive)
• Sani Wipes Alcohol-free (manufactured by Micorgen Inc.)
• T-Spray II (manufactured by Pharmaceutical Innovations,
Inc.)
To clean the Control panel:
1. Turn off the power of the system.
2. Moisten a soft, non-abrasive folded cloth with water or a
mild, non-abrasive soap and water solution.
3. Gently wipe the surface of the console.
4. Use a cotton swab to clean around keys or controls. Use a
toothpick to remove solids from between keys and controls.
When cleaning the operator control panel, make sure not to
spill or spray any liquid on the controls, into the system
cabinet, or in the probe connection receptacle.
5. In the event that disinfection is required or any stubborn
stains remain, absorb a small quantity of isopropyl rubbing
alcohol on a soft, dust-free cloth. Wipe the surface of the
console. Make sure no liquid drips on or between the keys.
Allow to dry.
NOTE: Please contact GE Service if the trackball needs to be cleaned.
To clean the keyboard:
1. Clean the keyboard as described above for the Control
panel.
2. In the event that disinfection is required or any stubborn
stains remain, absorb a small quantity of isopropyl rubbing
alcohol on a soft, dust-free cloth. Wipe the surface of the
key caps. Make sure no liquid drips on or between the keys.
Allow to dry.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-19

5718825-100 English Rev. 15 System view
Care and Maintenance

10-6-5 Cleaning the unit(continued)

10-6-5-3 Probe holder

1. Clean the probe holders with warm water and a damp cloth
to remove all traces of gel.
2. In the event that disinfection is required or any stubborn
stains remain, absorb a small quantity of isopropyl rubbing
alcohol on a soft, dust-free cloth. Wipe the surface of the
probe holder. Make sure no liquid drips into the system.
Allow to dry.

System cabinet

1. Moisten a soft, non-abrasive folded cloth with a mild,

general purpose, non-abrasive soap and water solution or a
general purpose disinfectant.
2. Wipe down the top, front, back and both sides of the
cabinet. Do not spray any liquid directly onto the unit.
3. In the event that disinfection is required or any stubborn
stains remain, absorb a small quantity of isopropyl rubbing
alcohol on a soft, dust-free cloth. Wipe the system cabinet
and allow to dry.

10-6-5-4 Footswitch

To clean the footswitch:

1. Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non-abrasive soap and water solution.
2. Wipe the external surfaces of the unit then dry with a soft,
clean, cloth.
3. In the event that disinfection is required or any stubborn
stains remain, absorb a small quantity of isopropyl rubbing
alcohol on a soft, dust-free cloth. Wipe the footswitch and
allow to dry.

10-20 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System maintenance

10-6-5 Cleaning the unit(continued)

10-6-5-5 Cleaning the air filters

Clean the system's air filters to ensure that a clogged filter does
not cause the system to overheat and reduce system
performance and reliability. It is recommended the filters be
cleaned every two weeks, but the requirements will vary due to
your system use.

CAUTION Be sure to lock the wheels before cleaning the air filters to
avoid injury by any unexpected movement of the system.
DO NOT operate the unit without the air filters in place.
Allow the air filters to dry thoroughly before re-installing them
on the unit.

1. Pull out the air filter.

Figure 10-1. Pull Out the Filter

2. Dust the filter with a vacuum cleaner and/or wash it with a

mild soapy solution.
If washed, rinse and dry the filter before re-installation.
3. Put back the air filter.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-21

5718825-100 English Rev. 15 System view
Care and Maintenance

10-6-5-6 Cleaning the metal filter

Clean the system's metal filter to ensure that a clogged filter

does not cause the system to overheat and reduce system
performance and reliability. It is recommended the filters be
cleaned every two weeks, but the requirements will vary due to
your system use.

CAUTION Be sure to lock the wheels before cleaning the metal filter to
avoid injury by any unexpected movement of the system.
DO NOT operate the unit without the metal filter in place.
Allow the metal filter to dry thoroughly before re-installing them
on the unit.

1. Pull out the air filter.

Figure 10-2. Pull Out the Air Filter

10-22 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System maintenance

10-6-5-6 Cleaning the metal filter(continued)

2. Pull out the metal filter. The metal filter is located under the
air filter at the bottom of the system.
Put the hand under the bottom of the system and and use
fingers to slide out the metal filter slowly, then use the hand
to pull it out.

Figure 10-3. Pull out the Metal Filter

3. Dust the filter with a vacuum cleaner and/or wash it with a

mild soapy solution.
If washed, rinse and dry the filter before re-installation.
4. Put back the metal filter
5. Put back the air filter.

10-6-6 Prevention of static electricity interference

Interference from static electricity can damage electronic
components in the system. The following measures help to
reduce the likelihood of electrostatic discharge:
• Wipe the alphanumeric keyboard and monitor with lint-free
tissue or a soft cloth dampened with anti-static spray on a
monthly basis.
• Spray carpets with anti-static spray because constant
walking on carpets in or near the scanning room may be a
source of static electricity.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-23

5718825-100 English Rev. 15 System view
Care and Maintenance

10-6-7 Optional Diagnostic Checks

Optionally you can access the diagnostic software as described
in Chapter 5 or 7. View the error logs and run desired
diagnostics.

10-6-7-1 View the Log

1. Review the system error log for any problems.

2. Check the temperature log to see if there are any trends that
could cause problems in the future.
3. Check the Configuration Log; update if needed.

10-24 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System maintenance

10-6-8 Probe maintenance

10-6-8-1 Probe related checks

Table 10-11: System preliminary checks

Step Item Description

1. Probe Holder Clean probe holders. (they may need to be soaked to remove excess gel).

2. Probes Thoroughly check the Ultrasound system probe connectors and remove
dust from inside the connector sockets if necessary. Visually check for
bent, damaged or missing pins.

3. Probes Verify that the Ultrasound system properly recognizes all probes.

10-6-8-2 Basic probe care

The Ultrasound system user manuals and various probe

handling cards provide a complete description of probe care,
maintenance, cleaning and disinfection. Ensure that you are
completely familiar with the proper care of GE probes.
Ultrasound probes can be easily damaged by improper
handling. See the User Manual and probe care cards for more
details. Failure to follow these precautions can result in serious
injury and equipment damage. Failure to properly handle or
maintain a probe may also void its warranty.
Any evidence of wear indicates the probe cannot be used.
Do a visual check of the probe pins and Ultrasound system
sockets before plugging in a probe.
The Interoperative probes often have special considerations and
individual probe user manuals. For Interoperative probes also
refer to their separate user manuals.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-25

5718825-100 English Rev. 15 System view
Care and Maintenance

10-6-8-3 Basic probe cleaning

Refer to the User’s Manual for details on probe cleaning.

WARNING To help protect yourself from blood borne diseases, wear

approved disposable gloves. These are made of nitrile derived
from vegetable starch to prevent allergic latex reactions.

CAUTION Failure to follow the prescribed cleaning or disinfection

procedures will void the probe’s warranty.
DO NOT soak or wipe the lens with any product not listed in the
User Manual. Doing so could result in irreparable damage to
the probe.
Follow care instructions that came with the probe.

CAUTION Disinfect a defective probe before you return it. Be sure to tag
the probe as being disinfected.

10-26 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 System maintenance

10-6-9 Battery Replacement and Disposition

Battery replacement every three years is recommended.
Contact a local Service Representative for the replacement of
the battery. Used batteries will be discarded appropriately by
GE.
NOTE: Disposing of the battery should meet local law and regulatory
requirements.
NOTE: Dispose of the system according to local law and regulatory
requirements.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-27

5718825-100 English Rev. 15 System view
Care and Maintenance

10-7 Electrical safety tests

10-7-1 Safety test overview

The electrical safety tests in this section are based on and
conform to IEC 60601-1 Medical Equipment Safety Standards.
They are intended for the electrical safety evaluation of
cord-connected, electrically operated, patient care equipment. If
additional information is needed, refer to the IEC 60601-1
documents

WARNING THE USER MUST ENSURE THAT THE SAFETY

INSPECTIONS ARE PERFORMED AT LEAST EVERY 6
MONTHS ACCORDING TO HISTORICAL DATA . ONLY
TRAINED PERSONS ARE ALLOWED TO PERFORM
THE SAFETY INSPECTIONS MENTIONED ABOVE.

DANGER TO MINIMIZE RISK OF ELECTRICAL SHOCK, ONLY

TRAINED PERSONS ARE ALLOWED TO PERFORM THE
ELECTRICAL SAFETY INSPECTIONS AND TESTS.

DANGER TO AVOID ELECTRICAL SHOCK, THE ULTRASOUND

SYSTEM UNDER TEST MUST NOT BE CONNECTED TO
OTHER ELECTRICAL EQUIPMENT. REMOVE ALL
INTERCONNECTING CABLES AND WIRES. THE
ULTRASOUND SYSTEM UNDER TEST MUST NOT BE
CONTACTED BY USERS OR PATIENTS WHILE
PERFORMING THESE TESTS.

CAUTION Possible risk of infection. Do not handle soiled or contaminated

probes and other components that have been in patient
contact. Follow appropriate cleaning and disinfecting
procedures before handling the equipment.

10-28 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Electrical safety tests

10-7-1 Safety test overview(continued)

Prior to initiating any electrical test, the Ultrasound system must
be visually inspected. Perform the following visual checks:
• Check for missing or loose enclosure covers that could
allow access to internal live parts.
• Examine the mains cord, mains plug and appliance inlet for
damaged insulation and adequacy of strain relief and cable
clamps.
• Locate and examine all associated transducers. Inspect the
cables and strain relief at each end. Inspect the transducer
enclosure and lens for cracks, holes and similar defects.
Test the system, peripherals and probes for leakage current.
Excessive leakage current can cause injury or death in sensitive
patients. High leakage current can also indicate degradation of
insulation and a potential for electrical failure. Do not use probes
or equipment having excessive leakage current.
To minimize the risk that a probe may shock someone the
customer should:
• Not use a probe that is cracked or damaged in any way.
• Check probe leakage current:
• Based on your facilities QA program for surface probes.
• Based on your facilities QA program for endocavitary
probes.
• whenever probe damage is suspected.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-29

5718825-100 English Rev. 15 System view
Care and Maintenance

10-7-2 Leakage current limits

WARNING Energy Control and Power Lockout for Vivid T8/Vivid T8 Pro.
When servicing parts of the Ultrasound system where there is
exposure to voltage greater than 30 volts:
1. Follow LOCK OUT/TAG OUT procedures.
2. Turn off the breaker.
3. Unplug the Ultrasound system.
4. Maintain control of the Ultrasound system power plug.
5. Wait for at least 30 seconds for capacitors to discharge as
there are no test points to verify isolation.
6. Remove/disconnect the battery, if present.
Ultrasound System components may be energized.

CAUTION Compare all safety-test results with safety-test results of

previously performed safety tests (e.g. last year etc). In case of
unexplainable abrupt changes of safety-test results consult
experienced authorized service personnel or GE for further
analysis.

The following limits are summarized for IEC 60601-1 Medical

Equipment Safety Standards. These limits are GEMS standards
and in some cases are lower than the above standards listed.

Table 10-12: Chassis Leakage Current Limits - Accessible Metal Surface

Normal Reverse
Country Condition Open Ground Polarity Open Neutral

All (Except USA & 0.1 mA 0.5 mA 0.5 mA 0.5 mA

Canada)

USA & Canada 0.1 mA 0.3 mA 0.3 mA 0.3 mA

Table 10-13: Type BF Applied Part Leakage Current Limits - Probes Surface

Normal Open Reverse Open *Mains

Country Condition Ground Polarity Neutral Applied

All 0.1 mA 0.5 mA 0.5 mA 0.5 mA 5.0 mA

10-30 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Electrical safety tests

10-7-2 Leakage current limits(continued)

Table 10-14: Type CF Applied Part Leakage Current Limits - ECG Connections

Normal Open Reverse Open *Mains

Country Condition Ground Polarity Neutral Applied

All 0.1 mA 0.5 mA 0.5 mA 0.5 mA 5.0 mA

NOTE: *Mains Applied refers to the sink leakage test where mains
(supply) voltage is applied to the part to determine the amount of
current that will pass (or sink) to ground if a patient contacted
mains voltage.
The following tests are performed at the factory and should be
performed at the site. These tests are: chassis leakage current,
and probe leakage current. All measurements are made with an
electrical safety analyzer which should be calibrated and
compliant with AAMI/ESI 1993 or IEC 60601 or AS/NZS 3551.

Table 10-15: Equipment Type and Test Definitions

Applied Parts or accessories that contact the patient to

Parts perform their function. For ultrasound equipment,
(AP) this includes transducers and ECG leads.

Type BF Body Floating or

non-conductive ultrasound
probes which are marked
with the 'man in box' BF
symbol. this includes all
transducers.

Type CF Cardiac Floating or

non-conductive
intraoperative probes for
direct cardiac contact and
isolated ECG connections
so marked with the 'heart in
box' CF symbol.

Sink The current resulting from the application of mains

Leakage voltage to the applied part. This test is required
test for Type CF applied parts.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-31

5718825-100 English Rev. 15 System view
Care and Maintenance

10-7-3 Outlet test - wiring arrangement

Test all outlets in the area for proper grounding and wiring
arrangement by plugging in the neon outlet tester and noting the
combination of lights that are illuminated. Any problems found
should be reported to the hospital immediately and the
receptacle should not be used.

CORRECT WIRING OPEN GROUND WIRE

REVERSED POLARITY OPEN NEUTRAL WIRE

HOT AND GROUND OPEN HOT WIRE

REVERSED

Figure 10-4. Typical alternate outlet tester

NOTE: No outlet tester can detect the condition where the Neutral
(grounded supply) conductor and the Grounding (protective
earth) conductor are reversed. If later tests indicate high leakage
currents, this should be suspected as a possible cause and the
outlet wiring should be visually inspected.

10-32 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Electrical safety tests

10-7-4 Grounding continuity

DANGER ELECTRIC SHOCK HAZARD. THE PATIENT MUST NOT BE

CONTACTED TO THE EQUIPMENT DURING THIS TEST.

Measure the resistance from the third pin of the attachment plug
to the exposed metal parts of the case. The ground wire
resistance should be less than 0.2 ohms. Reference the
procedure in the IEC60601-1.

1. GROUND PIN
2. OHMMETER
3. Vivid T8/Vivid T8 Pro
4. ACCESSIBLE METAL PART:
• MONITOR HOUSING
• PEAR PANEL CONNECTOR
• ANY CASTER/WHEEL SUPPORT

Figure 10-5. Ground continuity test

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-33

5718825-100 English Rev. 15 System view
Care and Maintenance

10-7-5 Chassis leakage current test

DANGER ELECTRIC SHOCK HAZARD. WHEN THE METER'S

GROUND SWITCH IS OPEN, DON'T TOUCH THE
ULTRASOUND SYSTEM!.

CAUTION Equipment damage possibility. Never switch the Polarity and

the status of Neutral when the Ultrasound system is powered
ON. Be sure to turn the Ultrasound system power OFF before
switching them using the POLARITY switch and/or the
NEUTRAL switch. Otherwise, the Ultrasound system may be
damaged.

10-7-5-1 Generic procedure

The test verifies the isolation of the power line from the chassis.
The testing meter is connected from accessible metal parts of
the case to ground. Measurements should be made with the unit
ON and OFF, with the power line polarity Normal and Reversed.
Record the highest reading of current.

Figure 10-6. Set Up for Chassis Source Leakage Current, IEC 601-1 Clause 19 -
Continuos Leakage Currents and Patient, Auxiliary Currents

When using the Microguard or a similar test instrument, its

power plug may be inserted into the wall outlet and the
equipment under test is plugged into the receptacle on the panel
of the meter. This places the meter in the grounding conductor
and the current flowing from the case to ground will be indicated
in any of the current ranges. The maximum allowable limit for
chassis source leakage is shown in Table 10-12 on page 10-30.

10-34 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Electrical safety tests

10-7-5-2 Data Sheet for enclosure Source Leakage Current

The test passes when all readings measure less than the value
shown in Table 10-12 on page 10-30. Record all data on the PM
Inspection Certificate.

Table 10-16: Typical Data Sheet for enclosure Source Leakage Current

Tester
Neutral
Tester or Test 1 Test 2 Real
Unit Polarity Ground Speaker Panel Metal Optional Optional
Power Switch Switch Cover Parts Test 3 Test 4

Enter Name of tested peripheral here:

ON NORM OPEN

ON NORM CLOSED

ON REV OPEN

ON REV CLOSED

OFF NORM OPEN

OFF NORM CLOSED

OFF REV OPEN

OFF REV CLOSED

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-35

5718825-100 English Rev. 15 System view
Care and Maintenance

10-7-6 Probe leakage current test

DANGER DO NOT USE THE PROBE IF THE INSULATING MATERIAL

HAS BEEN PUNCTURED OR OTHERWISE COMPROMISED.
INTEGRITY OF THE INSULATION MATERIAL AND PATIENT
SAFETY CAN BE VERIFIED BY SAFETY TESTING
ACCORDING TO IEC60601-1.

CAUTION Equipment damage possibility. Never switch the Polarity and

the status of Neutral when the Ultrasound system is powered
ON. Be sure to turn the Ultrasound system power OFF before
switching them using the POLARITY switch and/or the
NEUTRAL switch. Otherwise, the Ultrasound system may be
damaged.

10-7-6-1 Definition

This test measures the current that would flow to ground from
any of the probes through a patient who is being scanned and
becomes grounded by touching some other grounded surface.
NOTE: Some leakage current is expected on each probe, depending on
its design. Small variations in probe leakage currents are normal
from probe to probe. Other variations will result from differences
in line voltage and test lead placement. It is abnormal if no
leakage current is measured. If no leakage current is detected,
check the configuration of the test equipment.

10-7-6-2 Tools

For needed tools, see: 10-5 ‘Tools required’ on page 10-8.

10-36 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Electrical safety tests

10-7-6-3 Generic procedure on probe leakage current

Measurements should be made with the ground open and

closed, with power line polarity normal and reversed, and with
the unit Off and On. For each combination, the probe must be
active to find the worst case condition.

POLARITY REVERSING SWITCH

H (BLACK) PROBE

CONSOLE
POWER N (WHITE)
OUTLET

G (GREEN)

MOMENTARY
SWITCH LEAKAGE TEST
METER

Figure 10-7. Set up for probe leakage current

NOTE: Each probe will have some amount of leakage current,

dependent on its design. Small variations in probe leakage
currents are normal from probe to probe. Other variations will
result from differences in line voltage and test lead placement.

DANGER TO AVOID PROBE DAMAGE AND POSSIBLE ELECTRIC

SHOCK, DO NOT IMMERSE PROBES INTO ANY LIQUID
BEYOND THE LEVEL INDICATED IN THE PROBE USERS
MANUAL. DO NOT TOUCH THE PROBE, CONDUCTIVE
LIQUID OR ANY PART OF THE UNIT UNDER TEST WHILE
DOING THE TEST.

10-7-6-4 Meter Procedure Using Probe Adapter

Follow the Safety Analyzer tool instruction to test each

transducer for leakage current.
The electrical Safety Analyzer tool should be calibrated and
compliant with AAMI/ESI 1993 or IEC 60601 or AS/NZS 3551.

10-7-6-5 No Meter Procedure Using Probe Adapter

Follow the Safety Analyzer tool instruction to test each

transducer for leakage current.
The electrical Safety Analyzer tool should be calibrated and
compliant with AAMI/ESI 1993 or IEC 60601 or AS/NZS 3551.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-37

5718825-100 English Rev. 15 System view
Care and Maintenance

10-7-6-6 Data Sheet for Transducer Source Leakage Current

The test passes when all readings measure less than the values
shown in Table 10-13 on page 10-30. Record all data on the PM
Inspection Certificate.

Table 10-17: Typical Data Sheet For Transducer Source Leakage Current

Transducer Tested:

Tester Power Polarity Tester GROUND or

Unit Power Switch NUETRAL Switch Measurement

ON NORM OPEN

ON NORM CLOSED

ON REV OPEN

ON REV CLOSED

OFF NORM OPEN

OFF NORM CLOSED

OFF REV OPEN

OFF REV CLOSED

10-38 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 When there's too much leakage current …

10-8 When there's too much leakage

current …

10-8-1 AC/DC Fails

Where applicable, check the AC/DC adapter and its cable.
Replace a new one if any portion is defective.

10-8-2 Chassis Fails

Check the ground on the power cord and plug for continuity.
Ensure the ground is not broken, frayed, or intermittent. Replace
any defective part.
Where applicable, tighten all grounds. Ensure star washers are
under all ground studs.
Inspect wiring for bad crimps, poor connections, or damage.
Test the wall outlet; verify it is grounded and is free of other
wiring abnormalities. Notify the user or owner to correct any
deviations. As a work around, check the other outlets to see if
they could be used instead.
NOTE: No outlet tester can detect the condition where the white neutral
wire and the green grounding wire are reversed. If later tests
indicate high leakage currents, this should be suspected as a
possible cause and the outlet wiring should be visually
inspected.

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-39

5718825-100 English Rev. 15 System view
Care and Maintenance

10-8-3 Probe Fails

Test the probe in another connector to isolate if the fault lies with
the probe or the Ultrasound system. Or Change another probe
to confirm if the fail is caused by console.
NOTE: Each probe will have some amount of leakage, dependent on its
design. Small variations in probe leakage currents are normal
from probe to probe. Other variations will result from differences
in line voltage and test lead placement. The maximum allowable
leakage current for body surface contact probe differs from
inter-cavity probe. Be sure to enter the correct probe type in the
appropriate space on the check list.
If excessive leakage current is slot dependent, inspect the
system connector for bent pins, poor connections, and ground
continuity.
If the problem remains with the probe, replace the probe.

10-8-4 Peripheral Fails

Tighten all grounds. Ensure star washers are under all ground
studs.
Inspect wiring for bad crimps, poor connections, or damage.

10-8-5 Still Fails

If all else fails, begin isolation by removing the probes, external
peripherals, then the on board ones, one at a time while
monitoring the leakage current measurement.

10-8-6 New Unit

If the leakage current measurement tests fail on a new
Ultrasound system and if situation can not be corrected, submit
a Safety Failure Report to document the Ultrasound system
problem. Remove Ultrasound system from operation.

10-8-7 ECG Fails

Inspect cables for damage or poor connections.

10-40 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Inspection Paperwork

10-9 Inspection Paperwork

10-9-1 Ultrasound Inspection Forms

ULTRASOUND INSPECTION CERTIFICATE

C us tome r N a me : S y s te m I D : D is pa tc h N umbe r / Date Performed: Warranty/C ontract/HBS

System Type M ode l N umbe r: S e ria l N umbe r: M a nufa c ture D a te :

P robe 1 : F r e q u e nc y : S c a n F orma t*: M ode l N umbe r: S e ria l N umbe r:

P robe 2 : F r e q u e nc y : S c a n F orma t*: M ode l N umbe r: S e ria l N umbe r:

P robe 3 : F r e q u e nc y : S c a n F orma t*: M ode l N umbe r: S e ria l N umbe r:

P robe 4 : F r e q u e nc y : S c a n F orma t*: M ode l N umbe r: S e ria l N umbe r:

P robe 5 : F r e q u e nc y : S c a n F orma t*: M ode l N umbe r: S e ria l N umbe r:

* Scan Format: Phased Array, Linear Array, Curved Array, Mechanical Array or Other

Figure 10-8. Ultrasound Inspection Certificate

* Scan Format: Phased Array, Linear Array, Curved Array,

Mechanical Array or Other

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-41

5718825-100 English Rev. 15 System view
Care and Maintenance

10-9-1 Ultrasound Inspection Forms(continued)

FUNCTIONAL CHECKS PHYSICAL INSPECTION AND CLEANING

OK? or Physical Inspection and Cleaning
Functional Check (if applicable) N/A (if applicable) Inspect Clean

B -Mode F unc tion C ons ole

D opple r Mode s F unc tion LC D

C F -Mode F unc tion E x te rna l I /O

M-Mode F unc tion C a ble s a nd C onne c tors

Applicable Software Opti ons G E A pprove d P e riphe ra ls (DVD-RW, Printer)

A pplic a ble H a rdwa re O ptions L a be ling (see User Manual for Labeling)

Control Panel

LCD

Measurement Accuracy

GE Approved Peripherals

COMMENTS:
_________________________ ____________________________ _________________________
_________________________ ____________________________ _________________________
_________________________ ____________________________ _________________________
_________________________ ____________________________ _________________________

Figure 10-9. Functional Checks

ELECTRICAL SAFETY
Max Value Value
Electrical Test Performed Allowed Measured OK? Comments

Outlet (correct ground &wiring config.)

Type BF Applied Part Leakage Current

Limits- Probe

enclosure Source Leakage Current -

Chassis Leakage Current Limits

Peripheral 1 Leakage Current

Peripheral 2 Leakage Current

PROBES

Probe Number Max Value Max Value

(from previous page) Allowed Measured OK? Comments

Probe 1:

Probe 2:

Probe 3:

Final Check. All system covers are in place. System scans with all probes as expected.

Accepted by: ______________________________________________________________________

Figure 10-10. Electrical Safety

10-42 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Electrical Safety Tests Log

10-10 Electrical Safety Tests Log

Table 10-18: Electrical safety tests log

Electrical test Max Value OK? Comments

performed value measured
allowed

Outlet (correct ground

and wiring config.)

System ground
continuity

Chassis source
leakage current -
probe

Chassis source
leakage current -
wheel

Chassis source
leakage current -
monitor

Patient lead source

leakage (lead to
ground)

Patient lead source

leakage (lead to lead)

Patient lead source

leakage (isolation)

Peripheral 1 leakage
current

Peripheral 1 ground
continuity

Peripheral 2 leakage
current

Vivid T8/Vivid T8 Pro – Proprietary Service Manual 10-43

5718825-100 English Rev. 15 System view
Care and Maintenance

Table 10-18: Electrical safety tests log (Continued)

Electrical test Max Value OK? Comments

performed value measured
allowed

Peripheral 2 ground
continuity

Peripheral 3 leakage
current

Peripheral 3 ground
continuity

Table 10-19: Electrical safety tests (probes) log

Max Max value OK? Comments

value measured
Probe allowed

10-44 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

System view 5718825-100 English Rev. 15
 Index

A verification, 3-18
customer provided prerequisite, 8-178
abbrevations, 9-3
acclimate time, 2-3 D
authorized representative in EU, 1-34
average setup time, 3-3 damage
in transportation, 3-11
B damage in transport, i-16
dangerous procedure warnings, 1-26
before installation (site preparations), 2-1 data network setup requirements, 2-18
Boot Up, 3-23 desirable features, 2-15
DICOM network function, 2-19
C DICOM setup requirements, 2-20, 2-22
display PDF files
cable inspection from manual CD-ROM
mains cable inspection, 10-14 print PDF files
care and maintenance, 10-1 from manual CD-ROM, 4-20
warnings, 10-3 disposal
CE compliance, 1-30 used media, 8-239
change history, i-1 used parts, 8-239
chapter 1
introduction, 1-1 E
chassis leakage current test, 10-34
Cleaning electrical requirements, 2-6
Ultrasound unit, 10-17 EMI limitations
cold or hot EMI limitations, 2-9
if the unit is very cold or hot, 2-3 general requirements, 2-6
compatibility site circuit breaker
hardware/software, 9-4 site circuit breaker, 2-7
completing the setup, 3-19 site power outlets
compliance, 1-30 site power outlets, 2-7
configuration, 3-24 specific requirements for the unit, 2-6
connect unit power plug
ethernet, 3-21 unit power plug, 2-7
probe, 3-23 electrical safety, 1-24
USB flash card, 3-21 electrical safety tests, 10-28
connections electrical specification, 3-20
on the rear panel, 3-21 electromagnetic interference
console environmental requirements, 2-3 abatement, 2-10
console requirements, 2-3 prevention, 2-10
contact information, 1-32 electrostatic discharge prevention, 1-31
contents in this manual, 1-3 EMC, 1-30
conventions used in book, 1-11 compliance, 1-30
cooling, 2-5 what is EMC?, 1-30
copyrights, i-19 EMI, 1-30
customer assistance, 1-32 abatement, 2-10
phone numbers, 1-33 prevention, 2-10
customer order protection, 3-18

Vivid T8/Vivid T8 Pro – Proprietary Service Manual Index-1

5718825-100 English Rev. 15
environmental dangers, 2-23 installation
environmental specifications for the unit, 2-4 see "system setup", 3-1
errors, i-17 installation warnings
ESD, 1-30 see "setup warnings", 3-3
ESD prevention, 1-31 introduction (chapter 1), 1-1
ethernet
connect, 3-21 L
examine packages, 3-8
external I/O labels
connections, 3-21 transportation box label, 3-11
legal notes, i-19
F lighting, 2-5
list of abbrevations, 9-3
facility needs, 2-12 loading software, 8-178
desirable features, 2-15 lockout/tagout (LOTO) requirements, 1-27
DICOM network function, 2-19 LOTO
DICOM setup requirements, 2-20, 2-22 lockout/tagout requirements, 1-27
InSite requirements, 2-18
network setup requirements, 2-18 M
purchaser responsibilities, 2-13
recommended floor plan suggestion, 2-17 mains cable inspection, 10-14
required facility needs, 2-14 maintenance
suggested floor plan physical inspection, 10-15
scanner and EchoPAC in same room, 2-18 preliminary checks, 10-12
flash card system maintenance, 10-12
connect, 3-21 maintenance task schedule, 10-6
floor plan suggestion manufacturer, 1-34
recommended, 2-17 mass
scanner and EchoPAC in same room, 2-18 with monitor and peripherals, 3-19
functional checks, 10-13 mechanical safety, 1-21
mains cable inspection, 10-14 model designations, 1-11
system checks, 10-13 models covered by this manual, 1-5

G N
GE Healthcare leakage current limits, 10-30 network setup requirements, 2-18
general console requirements, 2-3
generic procedure on probe leakage current, 10-37 O
grounding continuity, 10-33
omission and errors, i-17
H operational and storage temperature for probes, 2-11

hardware/software compatibility, 9-4 P

hardware-software
compatibility, 5-3 packing materials
recycling information, 3-17
hot or cold
paperwork
if the unit is very cold or hot, 2-3
how often should maintenance tasks be performed?, after setup, 3-74
PDF files
10-6
display and print, 4-20
human safety, 1-18
periodic maintenance inspection (PM), PM (periodic
I maintenance inspection), 10-4
phone numbers
icons, 1-11 customer assistance, 1-33
icons indicating a special procedure to be used, 1-14 physical dimensions, 3-19
if the unit is very cold or hot, 2-3 physical inspection
important precautions, i-3 at arrivel, 3-18
InSite position
network requirements, 2-18 of tilt and shock indicators, 3-9

Index-2 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

5718825-100 English Rev. 15
Power On, 3-23 shock indicator, 3-7
precautions site preparations, 2-1
certified electrical contractor statement, i-16 time and manpower requirements, 2-11
damage in transport, i-16 software loading, 8-178
important precautions, i-3 software/hardware compatibility, 9-4
service safety considerations, i-18 software-hardware
translation policy, i-3 compatibility, 5-3
prepeare for setup, 3-18 specifications, 3-19
prerequisite electrical specifications, 3-20
provided by customer, 8-178 physical dimensions, 3-19
probe standard GE tool kit, 10-8
connect, 3-23 standard hazard icons, 1-13
probe cleaning, 10-26 statement
probe leakage current test, 10-36 certified electrical contractor statement, i-16
probe maintenance, 10-25 system
basic probe care, 10-25 specifications, 3-19
basic probe cleaning, 10-26 system checks, 10-13
probe related checks, 10-25 system maintenance, 10-12
probe related checks, 10-25 physical inspection, 10-15
probes environmental requirements, 2-11 preliminary checks, 10-12
operational and storage temperature for probes, system manufacturer, 1-34
2-11 system requirements verification, 3-19
product icons, 1-15 system setup, 3-1
product locator installation card, 3-75
products covered by this manual, 1-5 T
proprietary to GE Healthcare, i-19
Purchaser responsibilities, 2-13 tilt and shock indicators
position, 3-9
R tilt indicator, 3-7
time and manpower requirements
rear panel site preparations, 2-11
connections, 3-21 tools required, 10-8
receiving and unpacking, 3-6 special tools, supplies and equipment, 10-11
receiving the product, 3-7 standard GE tool kit, 10-8
recycling information trademarks, i-19
packing materials, 3-17 translation policy, i-3
required facility needs, 2-14 transport
requirements, 2-3 damage, i-16
requirements verification, 3-19 transportation
returning/shipping probes and repair parts, 1-28 shock indicator, 3-7
revision history, i-1 tilt indicator, 3-7
transportation box label, 3-11
S typical users of the service manual, 1-4

safety U
human, 1-18
safety precaution messages, 1-12 unpacking, 3-6
safety test overview, 10-28 unpacking instructions, 3-12
service safety considerations, i-18 USB
setup flash card
completion, 3-19 connect, 3-21
preparations, 3-18 used media
reminders, 3-3 disposal, 8-239
setup time, 3-3 used parts
setup warnings, 3-3 disposal, 8-239
shipping/returning probes and repair parts, 1-28
shock and tilt indicators V
position, 3-9
verification

Vivid T8/Vivid T8 Pro – Proprietary Service Manual Index-3

5718825-100 English Rev. 15
 system requirements, 3-19
verify customer order, 3-18
voltage settings, 3-20

W
warnings, 10-3
dangerous procedures, 1-26
receiving and unpacking, 3-6
what is EMC?, 1-30
when there’s too much leakage current, 10-39
chassis fails, 10-39
ECG fails, 10-40
new unit, 10-40
peripheral fails, 10-40
probe fails, 10-40
still fails, 10-40

Index-4 Vivid T8/Vivid T8 Pro – Proprietary Service Manual

5718825-100 English Rev. 15
GE