If the L scale is on the slider, and you’re not too much concerned accuracy (the procedure does 5 ‘align scales’ operations before the final ‘read the result’) one linear scale is sufficient, if you use the hairline on the cursor as a kind of memory:
”Example: calculate 0.23 + 0.45
- "Reset" the rule so that all the scales are lined up.
- Move the cursor to 0.23 on the L scale.
- Move the leftmost 0 on the L scale to the hairline.
- Move the cursor to 0.45 on the L scale.
- Reset the rule again so that all the scales are lined up.
- The cursor should now be at 0.68 on the L scale, which is the sum of 0.23 + 0.45.”
Using a sledge hammer, break the slide rule into N pieces, taking care to insure that N is greater than the sum you wish to compute. Now to compute the sum of A and B, count out A pieces into a paper bag, then count out B pieces into the same paper bag. Now empty the bag onto a clean workspace and count the total number of pieces to produce the result.
”Example: calculate 0.23 + 0.45
- "Reset" the rule so that all the scales are lined up.
- Move the cursor to 0.23 on the L scale.
- Move the leftmost 0 on the L scale to the hairline.
- Move the cursor to 0.45 on the L scale.
- Reset the rule again so that all the scales are lined up.
- The cursor should now be at 0.68 on the L scale, which is the sum of 0.23 + 0.45.”
(from http://www.antiquark.com/2005/01/slide-rule-tricks.html)