This story is available exclusively to Business Insider
subscribers. Become an Insider
and start reading now.Have an account? .
Hyperloop One, formally known as Hyperloop Technologies, demoed its propulsion technology in North Las Vegas, Nevada on Wednesday.
The test consisted of sending the company's linear motor down an open air test track on a sled at more than 100 miles per hour.
We had the chance to visit the site and witness the testing first hand.
Here’s what it was like to watch the historic event.
We were told to arrive at the Palazzo Hotel at 8:45 AM to check-in for the event. From here they loaded all of us journalists onto buses to make the trek to Hyperloop One’s test site.
Cadie Thompson/Tech Insider
The test site is located at the Mountain View Industrial Park in Apex Industrial Park
in North Las Vegas. It’s about a 35 minute drive from the Las Vegas Strip and there’s not much along the way except desert.
Cadie Thompson/Tech Insider
The only other facility we spotted nearby was the Apex Solar Complex.
Cadie Thompson/Tech Insider
The first thing we noticed when pulling up to the site were the giant tubes that lined the property.
Cadie Thompson/Tech Insider
Once we were off the bus, we were taken to a viewing area that had been set up several hundred feet away from the track.
Cadie Thompson/Tech Insider
The track is about a half-mile long and was built on raised ground. So even though we were pretty far back from the track, we could still see it pretty well.
Cadie Thompson/Tech Insider
By the time the presentation was about to begin, it was standing room only. Journalists, investors, and guests invited by the company all gathered onto the stands looking for a good spot.
Cadie Thompson/Tech Insider
At about 10:45 AM, co-founder Shervin Pishevar kicked off the event with opening remarks.
Cadie Thompson/Tech Insider
Brogan BamBrogan, Hyperloop One’s CTO, followed Pishevar with a breakdown of how the propulsion system works. He then initiated the 10-second countdown for the test to begin. No one really knew what to expect, but everyone was still on the edge of their seat.
Cadie Thompson/Tech Insider
When the control room reached the number one the sled took off down the track. Media weren't allowed to live stream the event, but we did manage to catch some footage with our cameras and with our iPhones.
After the demo, a sled recovery vehicle pulled the sled back to the other end of the track.
Cadie Thompson/Tech Insider
Afterwards we had a chance to walk around the site to check out the tubes and technology up close.
Cadie Thompson/Tech Insider
Here you can see some of the steel tubes are set up on pylons. This is just a display area, but it's pretty close to what a production set-up would actually look like.
Cadie Thompson/Tech Insider
There were several steel tubes set up around the property that were used for display so that we could get close and even climb up inside. But most of the tubes were kept behind a barbed wired fence. The tubes behind the fence will be used for the company's next test track.
Cadie Thompson/Tech Insider
After checking out the tubes, we headed over to the end of the test track where the engineering space was located. This area is pretty well-guarded.
Cadie Thompson/Tech Insider
I tried to get closer to the track from the front, but a body guard made sure we stayed in the designated area.
Cadie Thompson/Tech Insider
However, the engineers did open up part of their workspace to us so that we could see where all of the magic happens.
Cadie Thompson/Tech Insider
We also had a chance to get a closer look at the sled that was used for test.
Cadie Thompson/Tech Insider
But by about 12:30 pm, we were herded back onto buses and headed back to the hotel.
